Water Management Equipment in Alabama

12 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Water Management ×

  • In: USA ×

  • In: Alabama ×


by Environmental Technologies of Alabama (ETA)     based in Madison, ALABAMA (USA)

Tough, Reversible DrainCovers in Two Sizes. These tough but easy-tohandle DrainCovers are made of solid polyurethane. They’re tacky on both sides, so either side can be used for forming a tight seal to block contaminants.


by Environmental Technologies of Alabama (ETA)     based in Madison, ALABAMA (USA)

Use in areas with high stormwater flow to prevent pollutants and debris from entering storm drains. Unique,multi-dimensional outer filter combined with rigid inner frame maintains a low profile to prevent damage fromvehicular traffic. Allow 12' overlap on each side of drain. 7 lb weighted attachment and tie-back straps for easyanchoring.


by Environmental Technologies of Alabama (ETA)     based in Madison, ALABAMA (USA)

For use with curb openings without street grates, Ultra-CurbGuard® conforms to the shape of the curb formaximum performance. Patented design allows clean water to flow through while trapping sediment and oil. Built-in overflow capabilities. Order length to exceed inlet opening by 2'.


by Environmental Technologies of Alabama (ETA)     based in Madison, ALABAMA (USA)

Ultra-DrainGuard® removes waste from stormwater before it can become a problem in the water system. This oil and sediment filtering product removes up to .87 gallons of hydrocarbons as well as dirt, sand and other contaminants. Designed for use in industrial facilities, construction sites, retail facilities and parking lots where polypropylene ...

GA - Model Series 624, 625 , 626 - Surge Relief Valves

by GA Industries, LLC     Office in ALABAMA (USA)

SEWAGE VALVES Figure 624, 625 Long Radius Elbow Body, Figure 626 Wye-body. GA Industries offers a wide range of surge relief valves especially designed for use with raw sewage, wastewater, raw water and other solids-bearing fluids. These valves are available from 2' to 16' (50mm to 400mm) and are standard with ANSI Class 125 flanged streamlined ...

Power, Water and Misc Utilities

by Modular Connections, LLC     based in Bessemer, ALABAMA (USA)

Substation Control Buildings.Pump Station Enclosures.Switch Buildings.Generator System Enclosures.VFD Housings.MCC Rooms.Air Monitoring Shelters

Heavy Gauge Steel Buildings

by Modular Connections, LLC     based in Bessemer, ALABAMA (USA)

Industrial. Electric and Water Utilities. Mining Operations. Custom Control Rooms. Various Interior Options. Highly Vandal & Weather Resistant.

Pota-Pox - Model Series FC20 - Fast-curing protective coating

by Tnemec Company, Inc.     Distributor in Irondale, ALABAMA (USA)

Fast-curing protective coating for use in steel and concrete potable water storage facilities. Contact your Tnemec representative for other systems and additional information on potential uses.

Spill Berms

by Environmental Technologies of Alabama (ETA)     based in Madison, ALABAMA (USA)

Easily Bends to Fit any Angle or Curve. Made of flexible 100% polyurethane elastomer so it’s non-absorbent and resistant to a wide variety of chemicals and fluids. Sturdy and Reusable Interlocking ends connect individual sections to create longer lengths so you can contain almost any spill. Just clean it with soap and water and it’s ready to ...

Induron - Model AC 403 - Acrylic Elastomeric Coating

by Induron Protective Coatings     based in Birmingham, ALABAMA (USA)

AC 403 is a 100% acrylic water borne high build elastomeric coating that fills and bridges minor hairline cracks. AC 403 Acrylic Elastomeric Coating, 403S - Smooth or AC 403TX - Texture, provides long-term protection against driving rain and alternate freezing and thawing. It has excellent resistance to long-term exposure to sun light and will ...

Pressure Sustaining Valve

by GA Industries, LLC     Office in ALABAMA (USA)

The GA Pressure Sustaining Valve protects the pressure integrity of the upstream system. This rugged and versatile piston control valve provides superior design, simple operation, and maximum performance in water control.

Self Priming Pumps

by BakerCorp     Office in Decatur, ALABAMA (USA)

Ideal Usage: Refineries, chemical facilities, waste water treatment plants, construction site dewatering.

Need help finding the right suppliers?

Let the XPRTs do the work for you