Only show results available in Connecticut? Ok

Water Mixing Applications

  • Premium

    Water treatment For Hemodialysis industry

    Controlling dialysate quality is critically important to hemodialysis patient health. Complications as minor as nausea and fatigue or as severe as metabolic acidosis and sepsis can result if dialysate composition is incorrect. All the factors that ultimately affect dialysate composition must therefore be carefully monitored and controlled: proper proportioning and mixing of concentrates with water; the quality of water mixed with concentrates to form dialysate; and the quality of water used in the reprocessing of...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for Circuit board cleanliness testing industry

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for Fountain solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Liquid/solid separation equipment for aeration

    Aeration is an effective and low-cost solution to oxidize iron and manganese. It can also provide high-efficiency removal of gases such as hydrogen sulfide, carbon dioxide, methane, and volatile organic carbons, which results in better process performance and/or improvement of taste and odor.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Portable and fixed gas analysers for sewage / waste water treatment AD

    AD of human waste has been common in many countries for years but increasing energy costs now drive efficiency. Sewage processors are large energy users and AD can offset and help manage this.

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • Premium

    Equalization basins for aeration and mixing

    Whether you have in-line or off-line equalization basins or lagoons with a large surface area or small deep tank; our flexibility can help you create a solution to fit your needs. We can help you minimize flow and/or loading spikes by providing mixing with or without aeration to allow your downstream treatment facility to run smoothly. We have years of experience and can provide you with trusted solutions.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Aeration and thorough mixing for lagoon optimization

    Lagoon SolutionsWith thousands of installations worldwide, Aeration Industries provides lagoon solutions that are built on the experience and expertise that comes from more than 40 years of experience in wastewater treatment. Whether it’s industrial wastewater treatment requiring thorough mixing and high oxygen transfer efficiency, or a municipal wastewater treatment system requiring efficient and effective treatment; Aeration Industries will design a solution to optimize your current lagoon.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Aeration and mixing technologies for winery wastewater treatment

    Your partner from vine, to barrel, to bottle. Wine production generates a wide variety of challenges managing wastewater throughout the year, and decades of helping winemakers has taught us that no two winery wastewater treatment systems are alike. In the face of increasing scrutiny from regulatory agencies, along with water, energy, and sustainability initiatives, we understand why you might feel like your focus is shifting from winemaking to wastewater management. That’s where we can help.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Aeration and mixing technologies for fog removal

    Ideal for industrial applications, our Aire-O2 Microfloat Dispersed Air Flotation (DAF) System is an effective, affordable and reliable physical/chemical pre-treatment technology for removing up to 90% of fats, oil, and grease, 60% of total suspended solids, and 30% of Biochemical Oxygen Demand – all at a much lower cost than traditional DAF systems.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    ADVANCEES - Ultrapure Water Application - Custom skid-mounted water purification equipments

    Ultrapure water (UPW) is water that has been purified to very strict specifications, containing by definition only H20, and H+ and OH- ions in equilibrium. Therefore, ultrapure water conductivity is about 0,055 uS/cm at 25oC, also expressed as resistivity of 18,2 MOhm. Ultra-pure water is mainly used in the semiconductor and pharmaceutical industry often is produced through processes like membrane filtration or ion exchange to reach the ultimate conductivity of 10 uS/cm. The demineralized water is then processed...

    By Advanced Equipment and Services based in Coconut Creek, FLORIDA (USA).

  • Premium

    Monitoring petroleum hydrocarbons in wastewater

    The economic advantage of continuous discharge could only be achieved at this location by meeting strict discharge limits for the level of hydrocarbons present in the discharged water. Local ordinances required continuous monitoring for continuous discharge of the company’s treated wastewater.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Aeration and mixing technologies for aerobic digester

    Powered by the Aire-O2Triton® Process Aerator/Mixer. Municipal and industrial aerobic digesters are an ideal application for the Aire-O2 Triton process aerator/mixer. The surface-mounted, minimal maintenance Triton provides superior aeration and mixing in solids of up to 4% and depths to 33 feet. Aeration Industries’ Aerobic Digester solution offers substantial capital and operational savings, as well as improved process flexibility. Multiple mounting options are available to best fit your needs.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Aeration and mixing technologies for food and beverage wastewater treatment

    Eliminate the risk of downtime: We understand how important water is in food and beverage manufacturing. We have been serving the food and beverage industry for many years and know how difficult it is to meet tightening FDA and EPA requirements, while still meeting your production schedule. We offer customized food and beverage wastewater treatment solutions that support sustainable operations, reduces total cost of ownership, and keeps you in compliance… giving you the assurance you need so you can focus...

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Aeration and mixing technologies for landfill leachate wastewater treatment

    Flexible equipment and reliable partners for evolving landfill leachate conditions. Aeration Industries understands the unpredictable nature of landfill leachate wastewater treatment due to seasonality and facility aging. We also understand how punishing leachate can be to wastewater equipment. The equipment and solutions we offer will provide the flexibility and reliability to match your operational challenges in landfill leachate wastewater treatment systems.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Water treatment solutions for private swimming pools

    Turn your dream into reality. The time has come – you are planning your own swimming pool. You`ve got the space and a rough idea of what it will look like – now all you need is the right technology and the right partner to make it happen. ProMinent is ready!

    By ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Aeration and mixing technologies for activated sludge systems

    The activated sludge process uses a mass of organisms to aerobically treat wastewater and is used to remove biodegradable organics from both municipal and industrial wastewaters.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Aeration and mixing technologies for chemical wastewater treatment

    Better Water Quality for Improved Productivity. Wastewater treatment solutions that meet rigorous standards. We understand how important it is to maintain consistent production. That’s why we will partner with you create a customized aeration solution that fits your needs and is flexible based on production fluctuations.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Ultra pure water treatment

    Ultra pure water is mainly used in the semi conductor and pharmaceutical industry. Because of the continuing miniaturilisation in the semi conductor industry, the specifications become more strict every year. Ultra-pure water contains by definition only H20, and H+ and OH- ions in equilibrium. Therefore, ultrapure water conductivity is about 0,054 uS/cm at 25oC, also expressed as resistivity of 18,3 MOhm.

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Premium

    REMOTOX for heavy metal precipitation applications

    REMOTOX® is a calcium polysulfide based liquid that consists of multiple sulfur compounds, which strongly bond to heavy metals in water. The metal sulfides formed have a very low solubility and persist as stable solids, which allows for a more environmentally sound disposal. Contact us today for additional info, pricing or a free sample.

    By Graus Chemicals, LLC based in Carefree, ARIZONA (USA).

  • Premium

    Oil in Water Analysis for Flowback or Produced Water

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote lab results can take several days to a week. InfraCal TOG/TPH Analyzers allow for oil in water testing at the well site in less than 10 minutes. The sampling requires a few simple steps that...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you