Water Modeling Applications available in USA
-
Parts cleaning wastewater solution
Parts cleaning wastewater is a common application for ENCON Wastewater Evaporators. Parts cleaning is almost entirely water-based since the Montreal Protocol forced companies to abandon chlorinated fluorocarbons (CFC’s) and solvent degreasers. The wastewater is generally brownish gray and translucent with a soapy appearance. It may have trace settled solids and floating ...
By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).
-
Air scrubber wastewater solution
Air Scrubbers strip out contaminants from exhaust stacks typically by trickling a stream of salt solution through a bed of media to extract contaminants by putting them into solution. The salts found in these solutions are typically sulfates, chlorides, and carbonates. Air Scrubber wastewater tends to have high total dissolved solids (TDS) or salts. Air Scrubber Wastewater cannot be simply flushed down the drain. Many companies choose to avoid the headaches of labor-intensive wastewater treatment technologies such ...
By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).
-
Ink, Paint, and Glue wastewater solution
Ink, Paint, and Glue wastewaters are some of the toughest wastewaters to deal with due to their tendency to coat functional components of the wastewater treatment equipment. This type of wastewater is typically treated in the ENCON Drum Evaporator. Qualification of the waste stream for the Drum Evaporator is performed via a bench scale test in the ENCON ...
By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).
-
Metal finishing wastewater solution
Metal finishing wastewater is a common application for ENCON Wastewater Evaporators. There are many types of wastewater generated in metal finishing. These include vibratory / tumbling wastewater, stamping wastewater, die casting wastewater and polishing wastewater. Metal Finishing wastewater cannot be simply flushed down the drain. Many companies choose to avoid the headaches of labor-intensive wastewater treatment technologies such as chemical treatment or filtration and simply pay to haul the wastewater. This ...
By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).
-
Spent coolant wastewater solution
Waste coolant or spent coolant wastewater is one of the more common applications for ENCON Wastewater Evaporators. The most common type of coolant is made up of water-soluble oils, but water-soluble synthetics or semi- synthetics are also used. The coolants are used to cool the tool and part to minimize overheating during machining and grinding applications. The coolant is collected in sumps and continuously recirculated. In time, the coolants break down and become less effective. The coolants, now spent, must be ...
By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).
-
Software Solutions for Sanitary Sewers Modeling
Wastewater systems are vital to the continued environmentally safe and sound performance and growth of communities throughout the world. Wastewater engineers promote stewardship in the operation, maintenance and management of various types of sanitary or foul water collection ...
By Innovyze based in Portland, OREGON (USA).
-
Solutions for Water and Wastewater Infrastructure
We can help you manage the lifecycle of your water and wastewater infrastructure. Build, design, and operate raw water transmission, treatment, and distribution systems to deliver potable water or sanitation systems to collect and convey sewerage and storm runoff for treatment. Our multi-discipline design solution will help you design and build better treatment plants. Our solution to plan, design, model, and analyze networks will help you to build better transmission and distribution ...
By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA).
-
Plating rinse wastewater solution
Plating rinse wastewater is one of the most common applications for ENCON Wastewater Evaporators. Wastewater from plating rinse tends to be rather corrosive. The chemistries used in the plating process can include a wide range of acids such as nitric acid, chromic acid, hydrochloric acid, sulfuric acid, hydrofluoric acid, as well as other non-acid chemistries like ammonium bifluoride and nickel sulfamate. Typically, the waste stream has a transparent, relatively clean look because they are dilute and the ...
By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).
-
PCSWMM - Advanced Modeling Software for Water Quality Modeling
Generate accurate non-point source pollutant loadings for TMDL, NPDES, MS4, CMOM and related studies. PCSWMM provide tools that help design control strategies for managing polluted stormwater released to receiving waters – making it easier to design to meet water quality ...
By Computational Hydraulics International (CHI) based in Guelph, ONTARIO (CANADA).
-
PCSWMM - Advanced Modeling Software for Dual Drainage System Design
Design, model and analyze dual drainage systems for flood control in new, existing or combined developments. Surface flows routed overland (major systems such as roads, swales, street sags, storage areas) can easily and accurately be combined with underground flows (minor system, such as sewer ...
By Computational Hydraulics International (CHI) based in Guelph, ONTARIO (CANADA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you