drainage system Articles
-
Modelling overland flows and drainage augmentations in Dubbo - Case Study
Introduction: Dubbo has experienced a number of overland flooding problems at several locations within the city. Council had formulated possible augmentation works to address the problems and was keen to confirm that the proposed works would address the local flooding problems. The drainage system in Dubbo faces a number of challenges due to the relatively flat grades on stormwater drainage lines ...
By Innovyze
-
Performance assessment of separate and combined sewer systems in metropolitan areas in southern China
To assess the performance of urban drainage systems in metropolitan areas in southern China, 12 urban drainage systems, including nine separate sewer systems (SSSs) and three combined sewer systems (CSSs) were monitored from 2008 to 2012 in Shanghai and Hefei. Illicit connection rates of SSS were determined. The results indicate that serious illicit connections exist for most SSSs. Annual ...
-
An integrated approach for urban water quality assessment
This paper introduces an integrated approach for the assessment of receiving water quality and the relative contribution of the urban drainage system to perceived receiving water quality problems. The approach combines mass balances with relatively simple receiving water impact models. The research project has learned that the urban drainage system is only one of the determining factors with ...
-
Impact of the volume of rain water on the operating constraints for a treatment plant
ABSTRACTThe new regulations require an increased amount of treatment of stormwater and a reduction of pollution loads discharged into the natural surroundings to be considered. Drainage systems therefore and particularly wastewater treatment plants should be sized correctly to cope with these peaks. Using a simulation software of wastewater treatment plant with activated sludge, such as SIMBAD, ...
-
A new litter trap for urban drainage systems
ABSTRACTLitter is generated in shopping areas and is washed or blown into stormwater drainage systems. These convey the litter to open water bodies leading to the accumulation of non-biodegradable litter on the banks and beaches of urban waterways and bay foreshores. The increasing public awareness of the problem prompted the State Government of Victoria to provide funding to develop an ...
-
Application of the stormwater management model to a piedmont city: a case study of Jinan City, China
The stormwater management model (SWMM) was adapted and calibrated to Jinan, a typical piedmont city in China, to verify the large-scale applicability of the model to piedmont cities. Fourteen storms were used for model calibration and validation. The calibrated model predicted the measured data with satisfactory accuracy and reliability. A sensitivity analysis was then conducted to evaluate the ...
-
Comparison between InfoWorks hydraulic results and a physical model of an urban drainage system
Urban drainage systems are frequently analysed using hydraulic modelling software packages such as InfoWorks CS or MIKE-Urban. The use of such modelling tools allows the evaluation of sewer capacity and the likelihood and impact of pluvial flood events. Models can also be used to plan major investments such as increasing storage capacity or the implementation of sustainable urban drainage ...
-
Urban drainage models – simplifying uncertainty analysis for practitioners
There is increasing awareness about uncertainties in the modelling of urban drainage systems and, as such, many new methods for uncertainty analyses have been developed. Despite this, all available methods have limitations which restrict their widespread application among practitioners. Here, a modified Monte-Carlo based method is presented that reduces the subjectivity inherent in typical ...
-
Modelling of
E. coli distribution in coastal areas subjected to combined sewer overflowsRivers, lakes and the sea were the natural receivers of raw urban waste and storm waters for a long time but the low sustainability of such practice, the increase of population and a renewed environmental sensibility increased researcher interest in the analysis and mitigation of the impact of urban waters on receiving water bodies (RWB). In Europe, the integrated modelling of drainage systems ...
-
Comparison of short-term rainfall forecasts for model-based flow prediction in urban drainage systems
Forecast-based flow prediction in drainage systems can be used to implement real-time control of drainage systems. This study compares two different types of rainfall forecast – a radar rainfall extrapolation-based nowcast model and a numerical weather prediction model. The models are applied as input to an urban runoff model predicting the inlet flow to a waste water treatment plant. ...
-
Assessing the potential of using telecommunication microwave links in urban drainage modelling
The ability to predict the runoff response of an urban catchment to rainfall is crucial for managing drainage systems effectively and controlling discharges from urban areas. In this paper we assess the potential of commercial microwave links (MWL) to capture the spatio-temporal rainfall dynamics and thus improve urban rainfall-runoff modelling. Specifically, we perform numerical experiments ...
-
Model-based monitoring of stormwater runoff quality
Monitoring of micropollutants (MP) in stormwater is essential to evaluate the impacts of stormwater on the receiving aquatic environment. The aim of this study was to investigate how different strategies for monitoring of stormwater quality (combining a model with field sampling) affect the information obtained about MP discharged from the monitored system. A dynamic stormwater quality model ...
-
Integration of urban runoff and storm sewer models using the OpenMI framework
This paper presents an integrated modeling approach that combines the legacy urban runoff and the legacy storm sewer models with data exchange at runtime to simulate sewer flows with real-time rainfalls. A software system called IRES has been developed to demonstrate the proposed approach. IRES uses the RUNOFF and the EXTRAN block of Storm Water Management Model (SWMM) as the legacy urban ...
-
Predicting combined sewer overflows chamber depth using artificial neural networks with rainfall radar data
Combined sewer overflows (CSOs) represent a common feature in combined urban drainage systems and are used to discharge excess water to the environment during heavy storms. To better understand the performance of CSOs, the UK water industry has installed a large number of monitoring systems that provide data for these assets. This paper presents research into the prediction of the hydraulic ...
-
Sediment and pollutant load modelling using an integrated urban drainage modelling toolbox: an application of City Drain
Numerical and computational modelling of flow and pollutant dynamics in urban drainage systems is becoming more and more integral to planning and design. The main aim of integrated flow and pollutant models is to quantify the efficiency of different measures at reducing the amount of pollutants discharged into receiving water bodies and minimise the consequent negative water quality impact. The ...
-
Combining multimedia models with integrated urban water system models for micropollutants
Integrated urban water system (IUWS) modeling aims at assessing the quality of the surface water receiving the urban emissions through sewage treatment plants, combined sewer overflows (CSOs) and stormwater drainage systems. However, some micropollutants tend to appear in more than one environmental medium (air, water, sediment, soil, groundwater, etc.). In this work, a multimedia fate and ...
-
Methodology for qualitative urban flooding risk assessment
Pluvial or surface flooding can cause significant damage and disruption as it often affects highly urbanised areas. Therefore it is essential to accurately identify consequences and assess the risks associated with such phenomena. The aim of this study is to present the results and investigate the applicability of a qualitative flood risk assessment methodology in urban areas. This methodology ...
-
Real-time forecasting urban drainage models: full or simplified networks?
Lead time between rainfall prediction results and flood prediction results obtained by hydraulic simulations is one of the crucial factors in the implementation of real-time flood forecasting systems. Therefore, hydraulic simulation times must be as short as possible, with sufficient spatial and temporal flood distribution modelling accuracy. One of the ways to reduce the time required to run ...
-
A methodology for probabilistic real-time forecasting – an urban case study
The phenomenon of urban flooding due to rainfall exceeding the design capacity of drainage systems is a global problem and can have significant economic and social consequences. The complex nature of quantitative precipitation forecasts (QPFs) from numerical weather prediction (NWP) models has facilitated a need to model and manage uncertainty. This paper presents a probabilistic approach for ...
-
The use of deconvolution techniques to identify the fundamental mixing characteristics of urban drainage structures
Mixing and dispersion processes affect the timing and concentration of contaminants transported within urban drainage systems. Hence, methods of characterising the mixing effects of specific hydraulic structures are of interest to drainage network modellers. Previous research, focusing on surcharged manholes, utilised the first-order Advection-Dispersion Equation (ADE) and Aggregated Dead Zone ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you