We couldn't find any water modeling equipment suppliers or service providers located in Jordan
Here is a list of equipment results with suppliers serving Jordan
Water Modeling Equipment For Water And Wastewater Available In Jordan
-
ShowcaseManufactured by NIVUS GmbHbased in GERMANY
Contactless flow measurement for open channels and part filled pipes. The contactless low-maintenance radar sensor provides reliable operation even at very high discharge velocities with low flow levels. Dynamic hydraulic models for various channel shapes based on varying filling levels enable accurate detection of the real flow rate. Introducing the NivuFlow 7550 we provide a transmitter for ...
-
PremiumManufactured by Senix Corporationbased in USA
ToughSonic CHEM 35 Level Sensor Features: Non-contact level measurement. Rugged construction, IP68 rated. Indoor or outdoor uses. Top and bottom mounting threads. Five outputs plus serial data. Serial data-only models. Temperature compensation. PC ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The T8400T (100-120VAC) and the T8400TE (200-240VAC) Series Air Samplers are high volume air samplers with a two stage, thermally protected electric motor driven vacuum blowers. The motor driven blower is mounted in a very durable lightweight plastic polypropylene housing, mounted to a sturdy base plate, having non-skid rubber feet. An optional portable flow-monitoring gauge calibrated in cubic ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The T8400 (120VAC) and the T8400E (230VAC) Series Air Samplers are high volume air samplers with a two stage, thermally protected electric motor driven vacuum blower and a 7-foot long electrical cord. The motor driven blower is mounted in a very durable lightweight plastic polypropylene housing, mounted to a sturdy base plate, having non-skid rubber feet. An optional portable flow-monitoring ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The T8400M (100-120VAC) and the T8400ME (200-240VAC) Series Air Samplers are high volume air samplers with two stage, thermally protected electric motor driven vacuum blowers. The motor driven blower is mounted in a very durable lightweight plastic polypropylene housing, mounted to a sturdy base plate, having non-skid rubber feet. An optional portable flow-monitoring gauge calibrated ...
-
PremiumManufactured by Eureka Water Probesbased in USA
Fluorescent dyes like Rhodamine are often added to water systems to provide water discharge and velocity data. Dye tracing studies can provide useful information for modeling surface and groundwater systems in addition to tracing contaminants. Fluorometers allow researchers to measure ultra-low concentrations of dye. The sensors extreme sensitivity and instrument flexibility allows researchers ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Prevents "wet" gas liquid droplets, such as rain or condensation, from contacting the sensor surface and causing incorrect flow ...
-
PremiumManufactured by BioMicrobics, Incbased in USA
BioRobic is a coarse-bubble submerged aeration system that provides supplemental aeration within the BioBarrier® HSMBR® or BioBarrier HSMBR Winery systems. Increased oxygen in the MLSS of the BioBarrier treatment tank increases breakdown of biological ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The automated introductory model for water analysis and teaching. The IC Eco Package can be retrofitted with Inline Ultrafiltration at any time. The scope of delivery includes the Eco IC, the 863 Compact IC Autosampler, the conductivity detector, the Metrohm Suppressor Module ("MSM") and the MagIC Net Basic ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
As well as the standard units, we design and produce individual high pressure water jetting systems in accordance with our customer needs. The configuration is flexible to respective ...
-
PremiumManufactured by Mobiltex Data Ltdbased in CANADA
The GTRI data logger has up to 8 data files for monitoring a range of analogue and digital signals and benefits from the latest advances in cellular ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Models 1015-12 and 1015-24 Rosette® multibottle arrays - accommodating 12 or 24 bottles - are a two-component system (deck command uttit and a submersible bottle mounting array) for remotely actuating (in sequence) General Oceanics water sampling ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The Model 2135 is a real time, hand held microprocessor controlled data acquisition unit. When used in conjunction with the Model 2031H electronic flowmeter, the unit receives the flow rate pulses and calculates the fluid velocity based on a highly stable crystal controlled time base. The well defined characteristics of the Model 2031H and the stable data acquisition time base forgoes the ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Four steps for occupational safety. With four steps to occupational safety, Scrubber K-415 provides you with maximal protection. The unit neutralizes poisonous fumes and reaction gases and minimizes use of cooling water to safeguard both you and the ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-EDL-300WE-HT is a powerful small foot print light weight AC/DC powered air sampling system operable from (1) line power or (2) an optional 24VDC external power source. This powerful air sampler is the lightest weight low volume air sampler available having similar flow rate capacity. This model is designed to operate in ambient temperature conditions as high as ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Automatic testing of mass flow controllers for analog and digital MFCs. Up to 250 nominal values are automatically set for the controller being tested and the test values together with the gas pressure and the gas temperature are saved in a ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1120 Standard Addition Controller allows both standard additions and blanks to be performed at user programmed intervals while using the Model 2537 Mercury Vapor Monitor. Standard additions are accomplished by timed activation of the Model 2537 internal calibration source and zero air selector valves. Standard additions can be timed to occur late in a sample loading cycle, ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model DF-EDL-14ME cart mounted mobile low volume air sampler with digital flow meter has an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 122 cm to 213 cm above floor level. Model DF-EDL-14ME contains state of the art microprocessor electronics, which provides for corrected flow rate measurements, volume totalizations, and an RS232 ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Models 1015-12 and 1015-24 Rosette® multibottle arrays - accommodating 12 or 24 bottles - are a two-component system (deck command uttit and a submersible bottle mounting array) for remotely actuating (in sequence) General Oceanics water sampling ...
-
PremiumManufactured by SRS Crisafulli, Inc.based in USA
Crisafulli skid mounted and trailer mounted power units, powered by electric motors or diesel engines, that have PTO take offs or hydraulic systems. To provide hydraulic power to Crisafulli Hydraulic Pumps, Crisafulli builds Crisafulli Standard Power Units in four configurations, each either skid or dual axle mounted - i.e., Crisafulli Diesel/Hydraulic Power Units, Crisafulli Gas/Hydraulic Power ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you