Water Modeling Equipment For Water And Wastewater
-
Showcasebased in NETHERLANDS
To guarantee an efficient biofouling control from a dosing point onwards it is crucial to expose all the intake and water system surfaces to the dosed biocide products. H2O designs and engineers biocide dosing systems to achieve an optimal dispersion and effectiveness from dosing system onwards. This is part of the services we can provide with ...
-
ShowcaseManufactured by Water Storage Tanks, Inc.based in USA
Oversized roofs on tanks are a common practice to achieve a more aesthetically appealing roof line with water tanks. Often times this is done to match the profile of masonry or a stone wall covering the exterior of tank or to match the roof line of an existing building or structure. CorGal roofs are regularly used on structures that do not hold water in order to create a visual architectural ...
-
PremiumManufactured by Water Storage Tanks, Inc.based in USA
CorGal tanks are available with smooth galvanized steel flat roof systems where the overall height of a pitched roof tank may be a problem. Smooth flat roof tanks can be designed for most snow and wind loads. The smooth flat roof tank consists of an interior galvanized steel, formed joist support system covered with bolted galvanized steel panels and sealed with rope caulk between the ...
-
PremiumManufactured by Myron L Companybased in USA
Myron L<sup>®</sup> Company’s new 900 Series Multi-Parameter Monitor / Controllers combine Accuracy, Reliability, Simplicity, and Flexibility. The user intuitive GUI (Graphical User Interface) allows easy and complete programmability of the instrument all from the LCD touch screen. These highly accurate instruments have the ability for simultaneous monitoring and controlling ...
-
PremiumManufactured by Skim-pakbased in USA
The 11840-DH has flow-controlled weirs with adjustable flow rate capabilities. The standard flow rate is 3 cubic meters per minute per meter of weir. The 11840-DH has 4 meters of total weir, and therefore is normally operated at a flow rate 11.2 m3/min, 2958gal/ min. Maximin flow rate is 4,000gpm. The 11840-DH excludes solid during the aeration cycle. Installation options include an articulating ...
-
PremiumManufactured by Water Storage Tanks, Inc.based in USA
Whether your company is seeking a reliable source for water storage tanks, or is looking for a tank system engineered for a particular application, the men and women of Water Storage Tanks, Inc. are at your service. Please let us know how we can help. We enjoy a challenge, so bring us your water storage management problems and ideas! Our combination of engineering and creativity can ...
-
PremiumManufactured by Eureka Water Probesbased in USA
Fluorescent dyes, particularly those which are non-toxic and not visible, like PTSA, are often added to water systems to provide water discharge and velocity data. Dye tracing studies can provide useful information for modeling surface and groundwater systems in addition to tracing contaminants. Fluorometers allow researchers to measure ultra-low concentrations of dye. With this extreme ...
-
PremiumManufactured by Skim-pakbased in USA
The 17500-SH has flow-controlled weirs with adjustable flow rate capabilities. The flow control weir will automatically adjust to the flow rate being pumped. The Grinder Skimmer has a submersible grinder pump mounted to the undercarriage of the skimmer. The grinder blades are exposed to the bottom back of the skimmer sump. It will skimmer solids into the skimmer sump where the grinder blade chew ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Models 1015-12 and 1015-24 Rosette® multibottle arrays - accommodating 12 or 24 bottles - are a two-component system (deck command uttit and a submersible bottle mounting array) for remotely actuating (in sequence) General Oceanics water sampling ...
-
PremiumManufactured by Eureka Water Probesbased in USA
Fluorescent dyes like Rhodamine are often added to water systems to provide water discharge and velocity data. Dye tracing studies can provide useful information for modeling surface and groundwater systems in addition to tracing contaminants. Fluorometers allow researchers to measure ultra-low concentrations of dye. The sensors extreme sensitivity and instrument flexibility allows researchers ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Models 1015-12 and 1015-24 Rosette® multibottle arrays - accommodating 12 or 24 bottles - are a two-component system (deck command uttit and a submersible bottle mounting array) for remotely actuating (in sequence) General Oceanics water sampling ...
-
PremiumManufactured by Mud Puppybased in USA
Our trailer makes moving your Mud Puppy Mud Recycler easier than ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
For measurements under difficult measurement conditions. Unrivalled light weight and short mounting length, unit can be installed by only one person. High accurate measurement in full pipes. Versatile use in pipes with various ...
-
PremiumManufactured by Skim-pakbased in USA
The 11820-DH has flow-controlled weirs with adjustable flow rate capabilities. The standard flow rate is 3 cubic meters per minute per meter of ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The F&J Mini-Calibrator is a small, lightweight microprocessor controlled instrument with sophisticated electronics that measures and displays flow rate corrected to a reference T and P, barometric pressure and air flow temperature. The Mini-Calibrator, which is an exclusive F&J design, is a direct reading instrument utilizing a bright LED with large characters that are easily viewed by ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
As well as the standard units, we design and produce individual high pressure water jetting systems in accordance with our customer needs. The configuration is flexible to respective ...
-
PremiumManufactured by Senix Corporationbased in USA
ToughSonic CHEM 20 Level Sensor Features: Non-contact level measurement. Rugged construction, IP68 rated. Indoor or outdoor uses. Top and bottom mounting threads. Five outputs plus serial data. Serial data-only models. Temperature compensation. PC ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Models 1015-12 and 1015-24 Rosette® multibottle arrays - accommodating 12 or 24 bottles - are a two-component system (deck command uttit and a submersible bottle mounting array) for remotely actuating (in sequence) General Oceanics water sampling ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The VPFlowScope® In-line is the ideal flow meter for point of use consumption measurement. It measures mass flow, temperature, pressure and totalized flow simultaneously and in both directions. The VPFlowScope In-line is perfect for smaller diameters where it produces all the data you need to optimize your compressed air consumption. With the VPFlowScope® In-line you don’t only see ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS Port-A-Reels are convenient for purging and sampling wells with an electric submersible pump. All of the components are built-in to the system – including the pump, motor cable and hose. The rugged powder-coated frame has large, 16'' pneumatic tires with extendable swivel castors on the front. The boom is extendable to accommodate different well casing heights. The units are also ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you