Pressure Control Valve (Water Modeling) Equipment Available In Antigua & Barbuda
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-SM and 206-PR-SM series control valves are engineered to be used anywhere pressure reducing valve failure is unacceptable. These valves have a second and independent operating system superimposed upon the standard primary system. With the assurance of a back-up system, maintenance schedules may be ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PFC / 206 PFC Pressure Modulation Valve is a pressure reducing valve with a special (Patented) pilot that increases downstream pressure as flow increases. The PFC valve alters and controls pressure with flow to create virtually constant ...
-
Manufactured by Cat Pumpsbased in USA
A pressure regulator is a valve that monitors the pressure in a pumping system and automatically by-passes unused liquid while maintaining a certain set system pressure. Pressure regulators are used as a primary pressure control valve in ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-R and 206-PR-R pressure reducing and pressure sustaining valves are based on the 106-PG or 206-PG main valve with the addition of the sustaining pilot 81-RP and pressure reducing pilot PR-160. Provided the upstream pressure setting is satisfied, the 81-RP pilot is kept open, ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106 2PR-SC-BT and 206 2PR-SC-BT dual adjustable set point pressure reducing valve using solenoid control is based on the 106-PG or 206-PG valve. The valve is installed with two PR pressure reducing pilots, one set to low pressure, the other to high ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR and 206-PR series pressure reducing valves are based on the 106-PG or 206-PG main valves. The pilot valves sense the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-S and 206-PR-S pressure reducing valves with downstream surge control are based on the 106-PG or 206-PG main valve. Pressure reducing pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-C and 206-PR-C pressure reducing and check valves are based on the 106-PG or 206-PG main control valve. The pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-SC and 206-PR-SC pressure reducing valves with solenoid shut-off are based on the 106-PG or 206-PG main valve. The pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in ...
-
Manufactured by Mueller Water Productsbased in CANADA
flowing conditions, the pilot reacts to small changes in pressure to control the main valve position by modulating the pressure above the diaphragm. The downstream pressure is maintained relatively steady at the pilot ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RF and 206-RF rate of flow control valves are based on the 106-PG or 206-PG main valves. The valve is ideal for limiting the flow to a pre-determined maximum (via maintaining a continuous pressure differential across an orifice). When the pressure differential is less than the set-point, ...
-
Manufactured by Idrobenne s.r.l.based in ITALY
Hydraulic continuous rotators for truck cranes and ...
-
Manufactured by Bombas Boyser, S.L.based in SPAIN
It dampens the pulsations, making the flow continous meaning a system of measurement can be used such as a flowmeter or pressure switches. It eliminates vibrations and hammering as well as reduces noise, increasing the working life of the installations. It's very useful in very long ...
-
Manufactured by Technolog Ltdbased in UNITED KINGDOM
The Cello 4S is a remote telemetry outstation delivering a scalable machine to machine (M2M) solution reducing user operating and capital costs. Multiple site parameters are monitored, recorded and transmitted over 2G (SMS/GPRS) or 3G networks, providing a comprehensive multi-application solution for the Utilities and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you