Only show results in Virginia? Ok

Water Monitoring Applications

  • Water disinfection for the food and beverage industry

    Pure Aqua has a wide range of solutions for the varied sources of water and different types of contaminants. Pure Aqua understands the stringent potable water drinking regulations and has executed potable water projects exceeding the state requirements.  Components are specifically selected to meet NSF/ANSI 61 standard and we work closely with consultants to ensure project approval. 

    By Pure Aqua, Inc. based in Santa Ana, CALIFORNIA (USA).

  • Liquid Level Contents Gauges -

    Gauges for the Ship Building & Offshore Industries We have the following Liquid Level Contents Gauges For Ship Building & Offshore use, the G35 and G31 models meet the requirements for SOLAS for use with flammable liquids, they are type approved by Lloyds, DNV and Rina amongst others. G35 Seemag- Magnetic Gauge: Approved for use on flamable Liquids G31 Seeflex - Reflex Gauge : Approved for use on flamable Liquids G21 Marine - Tubular gauge G20 Admiralty - Tubular gauge G22 Quickmount -Tubular gauge G34 Quickflex - Reflex Gauge - We have a new brochure detailing our range of products for the marine & shipbuilding industry. View/Download this brochure: http://www.seetru.com/datasheets/gauges/Seetru_Marine_Gauge_Brochure.pdf

    By Seetru Limited based in Bristol, UNITED KINGDOM.

  • Waste water monitoring solutions for wastewater treatment industry

    Improved waste management through automation can deliver more efficient waste treatment, reduced energy and chemical consumption and improved effluent quality. The cost of treatment and trade discharge can thus be significantly reduced.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Electrical Based Tomography Systems for Multiphase Flow

    Multiphase flows are complex and unpredictable however they have a significant bearing on the safety, costs and revenues of many processes – particularly in oil and gas, but also in aerospace, chemicals and other sectors.

    By Industrial Tomography Systems plc (ITS) based in Manchester, UNITED KINGDOM.

  • Water measurement systems & sensors for status & condition-based monitoring

    We offer a variety of telemetry based solutions to monitor and control assets:

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Distributed Temperature Sensing Technology for Stream Monitoring

    Temperature is an important factor in streams ecosystems. Heat tracers have been used to characterize contaminant transport, infiltration rates and energy exchange with groundwater, the atmosphere and radiation. The dynamics of these complicated water bodies is also affected by seasonal and diurnal patterns making characterization particularly challenging. Utilizing temperature measurements that capture spatial and temporal variations at stream ecosystem interfaces provides a mechanism for detailed characterization.

    By Silixa Ltd based in Elstree, UNITED KINGDOM.

  • FEDI - Electrodeionization

    The Fractional Electrodeionization (FEDI) process is an advancement of conventional EDI. The patented dual voltage process allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant’s design economics and reliability. By incorporating a two-stage separation process with different voltages the FEDI® process is able to: Achieve a higher hardness tolerance by having distinctly different concentrate chambers with separate reject streams and thus reducing the potential of hardness scaling. Optimize power consumption by using higher electrical current only where required. Ensure the best water quality, continuously & consistently by removing a major part of the deionization load in the ‘hardness removal zone’, while residual ionic impurities are effectively removed in the ‘silica removal zone’, which stays in a polishing mode.

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Continuous Monitoring of Wastewater

    The Sorbisense method allows for efficient monitoring of the sewage system and can help reduce costs of operation and environmental impact. The method is particularly well suited for tracking the source of periodic discharges, the identification of faulty pipe connections of the measuring of values in the recipient. The method also allows for measurements in dynamic sources - such as emissions from roads, roofs, parking lots and overflow

    By SORBISENSE based in Tjele, DENMARK.

  • Electrodeionization

    The Fractional Electrodeionization (FEDI) process is an advancement of conventional EDI. The patented dual voltage process allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant& design economics and reliability. By incorporating a two-stage separation process with different voltages the FEDI process is able to: Achieve a higher hardness tolerance by having distinctly different concentrate chambers with separate reject streams and thus reducing the potential of hardness scaling. Optimize power consumption by using higher electrical current only where required. Ensure the best water quality, continuously consistently by removing a major part of the deionization load in the hardness removal zone, while residual ionic impurities are effectively removed in the silica removal zone;, which stays in a polishing mode.

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Water monitoring for the oil&gas industry

    By IC Controls Ltd. based in Orangeville, ONTARIO (CANADA).

  • Water Data Management Solution for Groundwater Monitoring

    Deployed across all relevant sectors including landfill security, well field monitoring programs, pumping tests, and drinking water supply, KISTERS solutions can be used to measure groundwater data.

    By KISTERS AG based in Aachen, GERMANY.

  • NH3 Monitoring in Air

    NH3 (Ammonia) is a colorless gas with a distinctive pungent smell. Ammonia monitoring is essential in coal-fired power plants, where NH3 is used to reduce NOx emissions. The ammonia consumes all of the NOx, but its high concentration that is needed for these purposes also starts reacting with other things and in the process can clog up filters and cause premature failure of expensive SCR equipment and pre-heaters. Not to mention that these high levels create an irreparable damage to the environment.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Diverse Surface Treatment Technologies for Military Industry

    We have developed washing techniques and technologies for the military industry in keeping with high military standards of safety and efficiency, using water jets and the sanding power of aluminum oxide. We are currently creating an anchor profile that will allow us to file a plating patent application for an exclusive, entirely automated surface treatment which prolongs engine life in extreme conditions. At IST Pure, we also manufacture washing tunnels for the complete cleaning of military vehicles and ballistic equipment to prepare for and return from missions.

    By International Surface Technologies based in Laval, QUEBEC (CANADA).

  • Monitoring industrial trade discharge for wastewater treatement industry

    Industry has had to respond to the requirements of progressive environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide trade discharge monitoring and perform continuous water analysis for key consent parameters.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Sludge monitoring for water and wastewater industry

    Improved monitoring and automation can deliver more efficient waste treatment and reduced energy consumption and improved effluent quality. The cost of treatment and the quality of effluent discharge can thus be significantly reduced.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Precision liquid flow sensor measurement technology

    Accurate liquid flow sensor measurement can reduce water bills, determine leakage rates, and increase system efficiency. Solve accurate water and industrial liquid flow measurement requirements with clamp-on or insertion ultrasonic flow liquid flow meters featuring precision sensing elements or our complete line of multivariable mass vortex meters.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Measurement solution for AD-211 VOC speciation in natural gas, syngas & gasification

    Composition of Natural Gas, Syngas via VOC Speciation

    The composition of fuel gas is important in order to determine calorific value and also to detect any unwanted contaminants in the gas. Online analysis is important in order to give real-time and direct action on issues.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Water quality monitoring systems for portable water plants

    Low maintenance and reliability are key requirements for analyzers in potable water plants. Cost of ownership is another big issue.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Premium

    Pure drinking water solutions for laboratories

    For 40 years our water distillers have been used in laboratories throughout the world to produce high-purity distilled water. Not only are our stainless steel systems durable and reliable, but they waste much less water and are less expensive than the other brand of popular laboratory water distillers. Whether your facility is a medical, dental or research laboratory, our water distillers can be configured to meet any grade of water that you need. Simply tell us what grade of water you need to achieve and we will configure the best system to meet your specific needs.

    By Pure & Secure, LLC. based in Lincoln, NEBRASKA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you