Gas Sampling Manufacturers, Suppliers & Companies In New Jersey
-
For more than 30 years, Lumex Instruments has been developing and manufacturing laboratory and industrial analytical equipment, instruments, and procedures. We offer both traditional and new ingenious solutions, unique technologies and classical ...
Lumex Instruments - Sorbent Traps for PS-12B
Sorbent traps provide total mercury measurement as well as speciated mercury measurement (oxidized and elemental mercury phases). The flue gas sample is collected using a heated sample probe and ...
CONTACT SUPPLIER -
Safe Training Systems Ltd ( STS) specializes in scientific instrument design, development and manufacture. We have a wide range of skills - our products have involved detection systems using gas sensors, microwaves, diode arrays and also GPS, which ...
STS - GC/IR Detection System
In developing the STS Siloxane monitor the STS design team had to come up with a simple, cost effective but accurate method to measure Siloxane contamination in a gas stream which had many constituents and a high methane content ...
CONTACT SUPPLIER -
Since AMS, Inc. was founded in 1942, our products have been used by individuals, businesses, universities, non-profits, and government agencies throughout the world for a wide variety of testing, monitoring, and sampling purposes. AMS primarily ...
AMS - Soil Gas Sampling & Monitoring System
Soil gas sampling and monitoring with direct push methods are commonly used with soil gas surveys for the investigation of volatile organic compounds. AMS offers soil gas ...
CONTACT SUPPLIER -
Environics Inc. is a world leader in computerized gas flow instrumentation for gas mixers, gas dilution and calibration systems. Our headquarters for design, manufacturing, sales and service is located in a modern 11,000 square foot facility in ...
Environics - Silicon Coated Plumbing
Silicon surface treatment of the gas path eliminates surface adsorption of active compounds like sulfurs, H2S, ammonia and mercury on stainless steel surfaces. Also know as Silcosteel®/Sulfinert® or SilcoNert 1000/2000, ...
CONTACT SUPPLIER -
J.U.M. Engineering is an independent privately owned developer and manufacturer of FID based hydrocarbon analyzers since 1973. A complete line of Heated Total Hydrocarbon Analyzers using the Flame Ionization Detector (FID) technology in an array of ...
J.U.M. - Model 108 - High Temperature Sample Diluter
The Model 108 dilutes an introduced sample gas in a 1:10 (standard), or a 1:100 (optional) dilution rate to allow the linear measurement of hydrocarbon concentrations above several thousand ppm up to 10% and above. ...
CONTACT SUPPLIER -
Since opening in 1956, countless clients have counted on Acme Engineering Products for high quality products. Our ceaseless, commitment to excellence has built our reputation as one of the best in the industry, and with an impressive selection ...
ACME - Model CO2-2000 Series - Carbon Dioxide Monitor
This state-of-the-art instrument measures Carbon Dioxide (CO2) concentrations in the parts per million (ppm) range and is ideal for applications ranging from conference rooms to ...
CONTACT SUPPLIER -
ManufacturerDistributor in Windsor, NEW JERSEY (USA)
Universal Analyzers produces gas sample extraction, transport and conditioning systems for CEM (Continuous Emissions Monitoring) and process measurement. As part of the AMETEK Thermal Process Management business unit which includes O'Brien we can ...
Model 520 - Gas Sample Cooler
The Series 500 Sample Coolers are moderate capacity thermoelectric coolers. They provide a self-regulated 4.0°C dew point gas sample. The 500 Series Coolers condense the water from a wet ...
CONTACT SUPPLIER -
Manufacturerbased in Lakewood, NEW JERSEY (USA)
Perma Pure LLC, a Halma company is a leading manufacturer of gas conditioning products including dryers, humidifiers, filters, coalescers, specialty scrubbers and complete sampling systems. We market these products worldwide for use in medical, ...
Model PD Series - Gas Sample Dryers
Perma Pure PD-Series gas dryers are multi-tube Nafion gas sample dryers designed for high flow, high performance gas drying applications. These dryers can be used to dry to ...
CONTACT SUPPLIER -
ManufacturerDistributor in Westwood, NEW JERSEY (USA)
Cambridge Sensotec was founded in the year 2000 by Dr Mark Swetnam, Donald Kings and Victor Stekly. Using their vast experience and knowledge the team developed the Rapidox range of bench mounted oxygen analysers. Since then the company has ...
Rapidox - Model 2113 - Gas Sample Pump
The Rapidox 2113 sample pump accessory is available for end users of gas analysis equipment who need to draw a sample of gas from their ...
CONTACT SUPPLIER -
ManufacturerDistributor in Windsor, NEW JERSEY (USA)
Ohio Lumex is a worldwide leader in analytical products and services for gas measurement applications. From emissions, air quality, and process monitoring to gaseous fuels testing, we offer our customers a full array of tools to meet their unique ...
Ohio Lumex - Model RP-91 NG - Attachment for Natural Gas Samples
Used as an attachment for the RA-915M (or RA-915+), the RP-91NG allows for direct interference-free determination of mercury concentration in natural gas ...
CONTACT SUPPLIER -
ManufacturerDistributor in , NEW JERSEY (USA)
The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing and ...
HORIBA - Model GPS5 - Gas Sampling System
HORIBA gas samplers are suitable for volume-correct taking of gaseous samples during emission and emission measurements. This device can be used wherever gases and gaseous components must be ...
CONTACT SUPPLIER -
ManufacturerDistributor in Windsor, NEW JERSEY (USA)
TEI is a family business located in the Village of Cleves, Ohio. TEI employes skilled personnel who average over 20 years of experience each in the design, manufacture, and support of air pollution monitoring equipment. Our modern well-equipped ...
Gas Sampling Bags
on the valve. Due to the single barb design, a 1/4 inch compression fitting may also be utilized. The removal of a gas sample from a filled bag can be difficult to accomplish without contamination from the ambient ...
CONTACT SUPPLIER -
ManufacturerOffice in Marlton, NEW JERSEY (USA)
Eurofins EMLab P&K is a leading commercial indoor air quality (IAQ) laboratory in North America. The purpose of Eurofins Built Environment Testing is to provide Industrial Hygiene (IH) and Indoor Air Quality (IAQ) testing services to protect the ...
-
ManufacturerDistributor in Windsor, NEW JERSEY (USA)
Founded in 1975, Solinst manufactures high quality groundwater and surface water monitoring instruments in Georgetown, Ontario. We offer a broad range of innovative and practical hydrogeological and hydrological equipment, designed to give our ...
Solinst - Model 615ML - Multilevel Drive-Point Piezometer
Slide Hammer, similar to standard 615 installations, for high-resolution vertical groundwater or soil gas ...
CONTACT SUPPLIER -
Technologybased in East Windsor, NEW JERSEY (USA)
Max Analytical Technologies (Max) is a leader in developing FTIR gas analysis technology for in-processes monitoring, source testing, and ambient air monitoring. Our mission is to provide high-precision gas analysis products and systems that not ...
MAX - Model iAQ - Fully Automated FTIR-Based Ambient Air Monitoring System
The MAX-iAQ™ is a fully automated FTIR-based ambient air monitoring system capable of sequentially analyzing up to 20 sample lines. The comprehensive design provides complete control of sample streams via an ...
CONTACT SUPPLIER -
Manufacturerbased in Westwood, NEW JERSEY (USA)
CEA Instruments has been a leading supplier of hazardous gas detection instrumentation since 1972. Numerous units are available for monitoring over 200 different toxic gases, combustible gases and oxygen levels as pocket-size, portable, or wall ...
-
ManufacturerOffice in Trenton, NEW JERSEY (USA)
KNF was founded in 1946 by Kurt Neuberger in Freiburg im Breisgau, Germany. We have remained independent and family-owned ever since, offering a reassuring level of stability to our customers. We have established ourselves globally as a solution ...
-
ManufacturerDistributor in Raritan, NEW JERSEY (USA)
Geoprobe Systems is a team of skilled designers and craftsmen sharing the simple goal of producing the best possible subsurface probing and drilling equipment and tools in the world. To achieve this goal we leverage our strong engineering roots and ...
-
ManufacturerDistributor in Windsor, NEW JERSEY (USA)
SKC is known as a leading manufacturer of air sample pumps, sorbent tubes, gas sample bags, passive samplers, size-selective samplers, and filters for the industrial hygiene, occupational health, safety, and environmental markets. From its humble ...
SKC - Sidekick Pump
Reliability and simplicity make the SKC Sidekick a good entry level pump, whilst high build quality means it won't let you down. Available in three models including two ATEX approved models. All models offer a wide flow range of 5-3000 ml/min, which ...
CONTACT SUPPLIER -
ManufacturerDistributor in Windsor, NEW JERSEY (USA)
For more than 30 years, California Analytical Instruments, Inc. has produced the highest-quality gas analyzers and emission-monitoring systems for Industrial, Environmental, Process and Automotive applications. Bottom line: our instruments can ...
Model 600P - Oxygen Analyzers
CAI offers two dedicated analyzer models to measure Oxygen in a sample. The 600P uses paramagnetic technology and the 600F uses a fuel cell method to determine the percentage level of oxygen contained in a gas ...
CONTACT SUPPLIER
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you