Current Meter Equipment In Germany
-
PremiumManufactured by KISTERSbased in GERMANY
The OSSB1 universal current meter is a field-proven instrument for measuring the velocity of water in open and closed channels. It is used for point measurement of flow velocity in vertical profiles and covers a flow velocity range from 0.025 to 10 metres per ...
-
PremiumManufactured by KISTERSbased in GERMANY
The OSS-PC1 miniature current meter is a ?eld-proven instrument for measuring the velocity of water in shallow open and closed channels. It is used for point measurements of ?ow velocities on the water surface or in vertical pro?les down to the riverbed at ?ow speeds of 0.025 m/s to 6 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This small, lightweight mechanical current velocity meter has a measuring range of approximately 0.1 m/sec. to 7.9 m/sec. The meter is used for current velocity measurements in rivers, channels, sewage systems, pipes, etc. Suspended from a wire the meter can be applied at great depth. The meter ...
-
Manufactured by ASD Sensortechnik GmbHbased in GERMANY
Inductive current meters to be connected to data acquisition systems or to ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Hydrological current meter for flow measurement on a Ø 9 mm or Ø 20 mm rod // Point measuring method (detection of point velocities in measuring verticals) // Six different aluminum impeller blades for different applications are available // Connects to Counting device Z6 or to a notebook or tablet PC HDA-Pro operated with Software Q ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Robust, hydrological impeller for flow measurement on a Ø 20 mm rod or on a load weight (float wings) // Point measuring method (detection point velocities in the measuring verticals) // Suitable for measurements in watercourses with low to high flow rates // Different wing vanes available for different applications // Connects to Counting device Z6 or to a notebook or tablet PC HDA-Pro, ...
-
Manufactured by OTT HydroMet - Veraltobased in GERMANY
The OTT C31 Universal Current Meter is designed for flow velocity measurements in combination with hand-held wading rods or cable suspended from a bridge or boat. Different accessories like sounding weights (middle pieces), sounding reels (winches), cable ways etc. allow the setup of a complete flow monitoring station. OTT C31 Universal ...
-
Manufactured by OTT HydroMet - Veraltobased in GERMANY
The OTT C2 small current meter for discharge measurements for shallow waters in small rivers, channels, laboratories and river models. Proven a thousand times to measure reliably flow velocities from 0.025 up to 5 m/s. Available for rod measurements on 9 mm or 20 mm rod. ...
-
Manufactured by ASD Sensortechnik GmbHbased in GERMANY
Current Meters and Multi-parameter probes. Direct reading or logging instruments (optional). Probe system type Compact. The Compact probe can be equipped with five sensors adapted to the bottom flange. When the current meter is installed (2-axis compass and tilt sensor are integrated in the housing) 4 additional sensors can be ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Flowmeter, digital, mechanical, w/standard rotor response with the standard rotor-threshold approximately 10cm/sec (1/5 knot). Range 10cm/sec (1/5 knot) to 7.9m/sec approximately (15 knots) weight in water 113 grams (4 ounces) material: celcon rotor, nickel plated brass nose cone, polycarbonbate body, armaloyed stainless steel main rotor and idler gear shaft. Dimensions length 21.3 cm (8 3/8") ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The instrument is used for the accurate determination of the current velocity in water ways, channels, rivers and the sea. The meter can also be applied in polluted water currents. The measurements are executed with the propeller mounted on the rod(s) or connected to a cable. The current velocity meter has a ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The Mavs Current Meter is a true 3 axis Acoustic Current Meter which employs a differential travel time measurement technique. The current meter takes measurements across 4 acoustic axes to provide a true vector averaged velocity measurement. Programmable burst mode and triggered sampling provide ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The mini current meter with one aluminium propeller is used in small ditches, with low water levels. Measuring range 0.03 to 2.5 m/sec. The instrument is included in a complete set. ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Weight in water 113 grams (4 ounces) material: celcon rotor, nickel plated brass nose cone, polycarbonbate body, armaloyed stainless steel main rotor and idler gear shaft. Dimensions length 21.3 cm (8 3/8') diameter: standard rotor 6.98cm (2 3/4') low velocity 16.5cm (6.5'), depth rating unlimited (free flooding) data display: 6 ten digit counter wheels 000,000 to 999,999 distance determined by ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The model 2030CF Calibration Frame provides a check on the proper operation of your Model 2030 and 2031 series flowmeters. The frame imparts a torsionally precise spin to the rotor and a count difference is noted in the flowmeter window. A minimum count is necessary for the flowmeter to be within calibration. The General Oceanics Model 2030CF Calibration Frame provides a check on the proper ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Electronic digital flowmeter for velocity measurements, with 18" pigtail & underwater connector, low speed rotor used in conjunction with the 2135 or ...
-
Manufactured by Valeport Ltd.based in UNITED KINGDOM
A low cost, lightweight alternative to larger flow meters, ideal for use in applications where the superior durability and depth rating of Valeport's larger meters is not necessary. Utilising the standard Valeport 125mm diameter impeller, the Model 106 features speed and direction parameters as standard, with further options of ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Displays impeller type, velocity, total distance, elapsed time, low battery warning indicator and probe status. Freeze and re-set control. Two line, 32 character lcd display. 4 aa batteries and 10 meter cable included. Includes memory, rs232 option and ...
-
Manufactured by Valeport Ltd.based in UNITED KINGDOM
The Model 308 has been developed using proven industry standard sensors to meet the needs of oceanographers, hydrographers and surveyors who require an accurate current meter with flexibility of configuration and large memory capacity, which can output data directly to a PC and can be used in both self recording and direct reading ...
-
Manufactured by Valeport Ltd.based in UNITED KINGDOM
The Model 803 is designed specifically for use on ROVs and other underwater vehicles, providing real time relative water velocity information for pilots. It may be fitted to ROVs to provide actual through the water speeds, or fitted to Tether Management Systems to give measurement of local flow conditions. Measurements are updated every second and the ROVLog software provides a graphic and data ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you