Electrical Conductivity Equipment
-
Manufactured by Dyna Flex Inc.based in USA
Innercore: Electrically conductive (< one Megohm per meter), seamless nylon tube. Reinforcement: High tensile Aramid fiber. Cover: Red, bonded, abrasion & UV resistant polyurethane, pin pricked, crush resilient. Temperature Range: -40 degrees F. to +185 degrees F. (-40 degrees C. to +85 degrees ...
-
Manufactured by Creative Materialsbased in USA
125-10 electrically conductive ink and coating suitable for application by screen printing and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 125-10 ...
-
Manufactured by Marubeni Europe Plcbased in UNITED KINGDOM
MaruComp Electrical Conductive compounds offer a wide range of electrical conductivity ranging from 102 up to 106 ohm surface resistivity with broad range of polymer matrices including Polyolefins, Polyamides, PVCs and Fluoropolymers. Marubeni uses additives of highest quality in order to achieve high ...
-
Manufactured by Aquamonixbased in AUSTRALIA
The EC250 Electrical Conductivity Sensor provides highly accurate conductivity measurements in a wide range of hydrological ...
-
Manufactured by Wearwellbased in USA
Electrically Conductive Anti-Fatigue is our #1 seller year in and year out for static control applications. Perhaps it’s because the mat so effectively protects sensitive equipment while dramatically reducing standing fatigue. Or perhaps it’s because the mat is so remarkably durable and features our top of the line Nitricell ...
-
Manufactured by Wearwellbased in USA
Electrically Conductive Runner is the ideal floor runner for areas where static prevention is a priority. Can be rolled out for long aisle ways or cut to size for specific workstations. Use Electrically Conductive Runner to protect sensitive equipment or eliminate static annoyance. A grounding snap is included on each mat, and ...
-
Manufactured by Wetec Private Limitedbased in SINGAPORE
The AquaPlus probe is a combined optical dissolved oxygen, electrical conductivity and temperature sensor. Thanks to the built in conductivity sensor, the AquaPlus is able to calculate and automatically compensate DO readings for changes in water salinity. It’s compact, robust and highly accurate. It also requires very little ...
-
Manufactured by Vertek a Division of ARAbased in USA
in one test. Groundwater problems could include corrosive soils, salt water intrusion or environmental contamination. Any soil contaminate that has a typical electrical conductivity higher than that of water can be ...
-
Manufactured by Shanghai GL Environmental Technology Co., Ltd.based in CHINA
Apure A10 EC Electrical Conductivity Meter is intelligent upgrade product of ES-2200 industrial conductivity instrument. The electrical conductivity (TDS) value of various industrial water can be continuously measured and controlled. The device is widely used in scientific experiment equipment, chemical, ...
-
Manufactured by HM Digital, Inc.based in USA
Ideal for all water purification applications, wastewater regulation, aquaculture, hydroponics, and colloidal silver. Perfect for both consumer or commercial use. Carry one in your pocket or toolbox at all ...
-
Manufactured by Ingenjorsfirman Geotech ABbased in SWEDEN
With the ECPT sensor you measure the conductivity of the soil while performing standard CPTU test. Test results can be used for analysing salinity and detection of pollutants. The electric conductivity sensor is mounted on Geotechs 10 cm2 CPTU probes. The adapter consists of an array of four ring electrodes (Wenner configuration, i.e. with ...
-
Manufactured by Process Instruments (UK) Ltd. (Pi)based in UNITED KINGDOM
Why is conductivity measurement important in water treatment? The conductivity of water is extremely important when treating drinking water or industrial water because it gives an indication of the amount of dissolved material within that water. Process Instruments supplies a range of high-quality low-cost conductivity sensors to cover the ...
-
Manufactured by Veris Technologies, Inc.based in USA
Mapping texture with Soil EC captures this key physical property. Soil EC is soil electrical conductivity – a measurement of how much electrical current soil can conduct. It’s an effective way to map soil texture because smaller soil particles such as clay conduct more current than larger silt and ...
-
Manufactured by Epoxy Technology, Inc.based in USA
EPO-TEK EJ2189-LV is an electrically conductive, silver-filled epoxy. This two component system is designed for reliable low temperature ...
-
Manufactured by Zhejiang Shuanglin Groupbased in CHINA
The building electricity cable conduct pipe are huge demonded on size 16mm and 20mm. The following models as your project options. PVC16-32 4 cavity extrusion line, dust free cutting, high ...
-
Manufactured by Elastostar Rubber Corporationbased in USA
Elastostar Rubber Corporation excels in crafting custom and standard sizes of electrically conductive silicone tubing, along with conductive rubber hose, elastomer tubing, silicone extrusions, and rubber profiles. Our products are expertly designed to minimize static build-up, offer effective EMI/RFI shielding, and cater to various ...
-
Manufactured by Epoxy Technology, Inc.based in USA
EPO-TEK E4110 is an electrically conductive, silver-filled epoxy paste. This two component system is designed for low temperature curing from ambient to 80°C, although other heat cures can be ...
-
Manufactured by Rain Bird Corporationbased in USA
The Decagon 5TE is designed to measure the water content, electrical conductivity, and temperature of soil and growing media. Using an oscillator running at 70 MHz, it measures the dielectric permittivity of soil to determine the water content. A thermistor in thermal contact with the probe prongs provides the soil temperature, while the ...
-
Manufactured by Creative Materialsbased in USA
118-06(SP) is a screen-printable, B-Stageable, electrically conductive, one part epoxy coating and adhesive. 118- 06(SP) can also be applied by dipping and syringe dispensing. This system features excellent thermal stability, outstanding chemical resistance and excellent high temperature properties. Applications include, but are not ...
-
Manufactured by Industrial Tomography Systems Ltd. (ITS)based in UNITED KINGDOM
The DENS-ITOMETER is an electrical conductivity densitometer (ECD) that has earned the name “Gamma Buster” among customers as it is able to replace nuclear based gamma densitometers.Based on electrical resistance tomography, this new measurement system can take data independent of flow regime and also concentration of measure ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you