Water Monitoring Equipment in Germany

442 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Water Monitoring ×

  • In: Europe ×

  • In: Germany ×

RESOL - Model V40 - Flowmeter

by Resol     based in Hattingen, GERMANY

The RESOL V40 is a measuring instrument with a contactor for detecting the flow of water or water-glycol-mixtures and is used with the RESOL calorimeter. It is ready for use in the RESOL calorimeters. After a specific volume has passed, the V40 reed switch sends an impulse to the calorimeter. The heat quantity used is calculated by these impulses, ...

Model Q45P/R pH/ORP - Monitor

by Analytical Technology, Inc. (ATI)     Distributor in GERMANY

ATI's versatile Q45P/R pH/ORP system is designed for use in all industrial and municipal applications. The sensors are engineered to function normally in applications where conventional sensors quickly fail. Conventional pH/ORP sensors have an “open reference system,” which means the reference element and electrolyte are in contact ...

Suction Cups & Pore Water Sampling

by Decagon Devices, Inc.     Distributor in München, GERMANY

Monitor Soil Water Contamination: Sampling and testing soil pore water provides infomration about chemicals and chemical movement below the ground surface. Pore water samplers provide an early detection system for leaching, drainage, and leakage problems. Standard sampler length is 30 cm. Also available in 60, 90, 120, 160, and 200 cm lengths.

Model CTD 320Plus - WOCE Self Recording 1500M

by General Oceanics Inc.     Distributor in Bremen, GERMANY

The OCEAN SEVEN 320Plus WOCE-CTD multiparameter probe is the result of Idronaut's 25 years experience in the design and manufacturing of high quality fast response CTDs. The OCEAN SEVEN 320Plus CTD well meets the WOCE programme accuracy, precision and resolution specifications. The CTD can be easily equipped with an additional redundant ...

Model TMX 01 Services - Transmission Measuring Device

by UV-Technik Speziallampen GmbH     based in Wolfsberg, GERMANY

Battery operated transmission measuring device. Ideal for the on-site analysis of UVC-transmission for water at 254 nm. This device is needed for the design of new equipments as well as for surveying the water quality. For this device we also offer you a rental service.

redo::lyser - Electrochemical Sensor

by scan Messtechnik GmbH     Distributor in GERMANY

The redo::lyser is a long-term stable and maintenance free sensor for the on-line measurement of the redox potential immersed in the medium or in a flow cell. Thanks to a groundbreaking reference electrode, high precision is guaranteed in virtually any medium and under harshest conditions. It is pre-calibrated ex works and immediately ready for ...

Fish Toximeter - Real-Time Biomonitoring Analyser

by bbe Moldaenke GmbH     based in Schwentinental, GERMANY

The bbe Fish Toximeter observes the behaviour of fish in a tank under the influence of a stream of 'sample' water with the aid of a camera and continuous computer-assisted image analysis. This uncomplicated but highly sensitive instrument is designed to detect toxic substances in e.g. rivers, reservoirs, water supply systems, water treatment plant ...

Model Q45H/64 - Dissolved Ozone Monitor

by Analytical Technology, Inc. (ATI)     Distributor in GERMANY

Water treatment processes using ozone gas have steadily increased over the past 20 years.  Ozone has proven to be an extremely effective oxidant, removing organic carbon from raw water and destroying most pathogens.  As a result, ozone treatment is now widely used in the semi-conductor, pharmaceutical, and food and beverage ...

Model Q45CT - Toroidal Conductivity Monitor

by Analytical Technology, Inc. (ATI)     Distributor in GERMANY

ATI’s Model Q45CT Toroidal Conductivity system is designed for online monitoring of chemically aggressive process solutions. This sensor consists of two metallic ribbon coils that are fixed in place by the sensor jacket material. The drive coil is used to induce a current in the process solution. The second sensing coil is used to measure ...

Model CTD+ - Robust Sensors and Synchronised Sampling Monitor System

by Valeport Ltd     Distributor in Kiel, GERMANY

The MONITOR CTD+ utilises the same accurate, robust sensors and synchronised sampling techniques as the MIDAS range, but packaged as a smaller, lightweight unit to suit small boat or shallow water applications. The addition of a an extra sensor makes the MONITOR CTD+ a versatile and cost effective tool for gathering profiles of CTD and one other ...

SUNA - Model V2 - UV Nitrate Sensor

by Sea-Bird Scientific - a subsidiary of Danaher Corporation     Office in Kempten, GERMANY

The SUNA V2 UV nitrate sensor is the ultimate chemical-free solution for autonomous monitoring of nitrogen-based nutrient concentrations in ocean, estuarine and high turbidity freshwater environments.

HORIBA - Model FES-210L - Sanitary Conductivity Sensor (Ferrule Clamp Type)

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The FES-210L Series sanitary conductivity sensors are electric sensors that target sanitation issues by employing a flat structure that keeps dirt from adhering to the tip of the sensor, and they enable continuous, high accuracy measurement in liquids of various concentrations, from purified water to cleaning solutions. The FES-210L Series, which ...

ZoneScan - Model Alpha - Permanent Network Monitoring for Water Loss Management System

by Gutermann AG     Office in Stuttgart, GERMANY

More and more smart cities install ZoneScan Alpha as their all-in-one intelligent water loss management system to permanently and sustainably reduce Non-Revenue Water. Once installed, the system will automatically notify you of every leak in the monitored pipe network and at the same time give you exact locations of every leak. The software will ...

Model A15/76 - Turbidity Monitor

by Analytical Technology, Inc. (ATI)     Distributor in GERMANY

ATI’s Model A15/76 Turbidity Monitor is designed to meet the needs of both municipal drinking water systems and industrial water treatment for reliable, low-range turbidity measurement. The turbidity sensor is available with either a White Light Source for EPA Method 180.1 compliance monitoring, or an infrared light source for non-reporting ...

PQ45 Portable Monitor System

by Analytical Technology, Inc. (ATI)     Distributor in GERMANY

Monitoring water quality parameters at remote locations in potable water systems can present a challenge to those responsible for insuring safe drinking water.  This is especially true for chlorine residual measurements, which is an essential parameter in maintaining high quality drinking water at the consumer's tap.  Continuous ...

HORIBA - Model OM-51 - Portable Dissolved Oxygen Meter

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

This field-type dissolved oxygen meter measures dissolved oxygen concentration (DO), oxygen concentration (O2), saturation (SAT.RATIO) and temperature of water solutions. It uses a laboratory sensor to enable BOD measurement. Waterproof construction enables use at virtually any measurement site. This meter is being used in research institutions, ...

Model CTD - 320Plus - WOCE Self Recording 7000M

by General Oceanics Inc.     Distributor in Bremen, GERMANY

The OCEAN SEVEN 320Plus WOCE-CTD multiparameter probe is the result of Idronaut's 25 years experience in the design and manufacturing of high quality fast response CTDs. The OCEAN SEVEN 320Plus CTD well meets the WOCE programme accuracy, precision and resolution specifications. The CTD can be easily equipped with an additional redundant ...

Model C10/77 - Particle Counter

by Analytical Technology, Inc. (ATI)     Distributor in GERMANY

ATI’s Model C10/77 Particle Sensor is designed to provide valuable particle data by continuously monitoring particle counts in raw water, filter influent, or filter effluent. Based on a laser light blocking principle, this sensor will provide particle count data over size ranges from 2 to 400 microns, with three 4-20 mA analog outputs and an ...

Q40CT Blind Toroidal Conductivity Monitor

by Analytical Technology, Inc. (ATI)     Distributor in GERMANY

ATI’s Model Q40CT blind toroidal conductivity system is designed for online monitoring of chemically aggressive process solutions.  This blind, analog version is ideally suited for applications where reliable instrumentation is critical and economy of installation is essential.

Purolite - Model A520E - Nitrate Removal

by Purolite Corporation     Office in Ratingen, GERMANY

Purolite A520E is a macroporous strong base anion resin which is specially designed for the removal of nitrates from water for potable processes. The macroporous matrix and special ion exchange group functionality imparts ideal nitrate selectivity to Purolite A520E making this resin particularly suitable for nitrate removal even when moderate to ...

Need help finding the right suppliers?

Let the XPRTs do the work for you