Pipe Bursting (Water Pipes) Equipment
-
Manufactured by Trenchless Equipmentbased in USA
Hydraulic Pullers are the key component to a successful pipe bursting job. Trenchless Equipment (TE) is the Exclusive Distributor for Pipe Bursting Parts (PBP) line of equipment. The hydraulic unit pulls on a wire rope connected to a bursting head in the pipe, bursting or ...
-
Manufactured by Trenchless Equipmentbased in USA
TRENCHLESS EQUIPMENT PIPE BURSTING POWER SOURCE TRENCHLESS EQUIPMENT SOLUTION SPECIFICATIONS THE PBP50 PIPE BURST SYSTEM. Hydraulic Pullers are the key component to a successful pipe bursting job. Trenchless Equipment (TE) is the Exclusive Distributor for Pipe ...
-
Manufactured by KMG Pipe Rehabilitation Emirates L.L.C.based in UNITED ARAB EMIRATES
Is a well-established method for trench less replacement of water pipe, storm water and sewer pipes. An existing pipe is replaced size-for-size or up-sized with a new pipe in the same location. The technique is the most cost effective when there are few lateral connections, when the old pipe is structurally ...
-
Manufactured by TRIC Tools, Inc.based in USA
The TRIC Tools 8-inch standard bursting head attaches to a pipe end or PE cap that is fused to the replacement high-density polyethylene pipe. Pulling happens with a 7/8”, 1”, 1.125” or 1.25” swaged cable, and a 2-inch x 4.5 TPI stud termination. The PE driver functions as the head driver. The 8-inch standard mole ...
-
Manufactured by Mempex Ltdbased in BELARUS
This is a mini-unit, with the pulling capacity of 48 tons, applying the trenchless technology for replacement of average-diameter pipelines. The main purpose of this innovative device is trenchless replacement of cast iron, ductile iron, concrete, ceramic and other pipes by means of static pipe bursting. It is possible to keep the same ...
-
Manufactured by Roddie Inc.based in USA
The R8 Busting System slides apart into two components (70 lbs & 58 lbs) for easy set-up and can be used vertically or horizontally. All units come with your company name / logo engraved on the red drop ...
-
Manufactured by TRIC Tools, Inc.based in USA
In fact, the history of trenchless home sewer replacement essentially begins with TRIC Tools. The new X30 is the latest in a long line of TRIC lateral bursting machines that have defined the industry of residential sewer replacement for the last quarter century. Now lighter, stronger, and more affordable than ...
-
Manufactured by TRIC Tools, Inc.based in USA
The TRIC-Lock standard 6-inch head is used to pull a pipe-end or a polyethylene pipe fused to an HDPE replacement pipe. This assembly pulls with an open shackle termination and a 3/4” cable. The hinging of the pulling eye at the shackle pin enables maneuverability for tight-entry ...
-
Manufactured by HammerHead Trenchless Equipmentbased in USA
Underground contractors and municipalities around the world are using HammerHead® static pipe bursting equipment as an effective method to replace existing water, gas and sewer lines. Pipe bursting follows the path of the existing utilities, reducing utility strike risks and eliminating up to 85 percent of excavation work ...
-
Manufactured by TT Technologies, Incbased in USA
90% of all the pipe bursting in North America is completed using a pneumatic system. Grundocrack has replaced more than all other systems combined. Superior quality materials and unparalleled experience combine to form Grundocrack the most successful system for the Pipebursting® procedure of all ...
-
Manufactured by HammerHead Trenchless Equipmentbased in USA
While trenchless pipe bursting is recognized as a cost-effective way to replace natural gas pipes, the replacement of dated plastic pipe poses unique challenges. In the past, pipe bursting caused the plastic pipes to overheat, buckle, and jam. After years of working with gas ...
-
Manufactured by TT Technologies, Incbased in USA
The Grundotugger lateral pipe bursting system from TT Technologies provides the portability you want and the power you need to burst and replace service laterals, up to 150 feet and more, quickly and easily. This lightweight system (no component over 70 lbs.) includes everything you need for bursting operations including ...
-
Manufactured by Roddie Inc.based in USA
The Pipe Shark Water Line Bursting System is for the replacement of old water pipes by splitting and simultaneously pulling in the new product ...
-
Manufactured by HammerHead Trenchless Equipmentbased in USA
HammerHead pneumatic pipe-bursting systems are being used by underground contractors around the world as an effective method to replace failing, outdated or under sized sewer, water and gas lines. Pipe bursting follows the path of the existing utilities, reducing utility strike risks and eliminating up to 85 percent of excavation ...
-
Manufactured by TT Technologies, Incbased in USA
The self-contained, hydraulically operated Grundoburst static Pipebursting procedure system makes bursting ductile iron and steel pipe possible. With such powerful capabilities, the Grundoburst is having a tremendous impact on the water and gas ...
-
Manufactured by TRIC Tools, Inc.based in USA
The Hi-Flow 36 is geared for speed of operations in municipal projects where it counts. It’s well suited for the TRIC M-Series pullers and pipe bursting systems. M-Series machines will run from field-equipment and excavator auxiliary ports, but they operate at full capacity when in conjunction with the Hi-Flow 36. These machines are the ...
-
Manufactured by TRIC Tools, Inc.based in USA
The Hi-Flow 14 is the result of years of product field testing in the context of TRIC Tools lateral bursting systems. As a part of the new hydraulic pump line for residential pipe bursting, the Hi-Flow 14 pumps for pipe bursting systems are the optimal pairing for our X30 puller, yielding a four-times speed ...
-
Manufactured by Sylmasta Ltdbased in UNITED KINGDOM
Wrap & Seal Pipe Burst Tape is a waterproof pipe repair tape made from self-fusing silicone which seals live leaks on pipes made from copper, PVC plastic, steel, malleable iron, and many other materials. ...
-
Manufactured by TRIC Tools, Inc.based in USA
The TRIC Tools 4-inch standard pipe-bursting heads pull pipe-ends or PE caps fused to a replacement HDPE pipe. This assembly pulls with a 3/4” or 5/8” cable and an open shackle termination. The head-assembly pulling eye hinges at the shackle pin for jobs with tight ...
-
Manufactured by TRIC Tools, Inc.based in USA
Our 4-inch TRIC-Lock trenchless pipe piercing equipment makes a direct attachment to a 4-inch SDR17 pipe’s open end with no need for fusion with the HDPE pipe or the inclusion of a PE cap. The pulling equipment draws this assembly by a 3/4-inch or optional 5/8-inch cable via an open shackle termination and manages tight entries by ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you