Lagoon Design (Water Reservoirs) Equipment
-
PremiumManufactured by Reliant Water Technologiesbased in USA
The Reliant Lagoon Commander Pond/Lagoon Mixer continuously, and slowly, moves water along the bottom of a lagoon/pond, continually mixing the entire water column using a minimum of energy. When compared to standard surface aerators or directional mixers, the Lagoon Commander is more efficient, less costly to operate, and ...
-
Manufactured by NC Engineering (Hamiltonsbawn) Ltd.based in UNITED KINGDOM
The Lagoon Pump is designed to operate in very deep pits. With power requirements of 155hp + this pump is ideal for large farmer and contractors ...
-
Manufactured by Containment & Filtration Solutionsbased in USA
The CF-S’s Berm Box™ primary application is for polishing stormwater captured within existing secondary containment lagoons. Designed to be installed on the point of discharge of an existing secondary containment wall or berm, the Berm Box gives the user the ability to control, filter or stop the flow at the point of ...
-
Manufactured by Industrial & Environmental Concepts, Inc. (IEC)based in USA
All of IEC cover products are custom designed for lagoon or tank applications as wastewater covers. IEC has designed, fabricated and installed cover systems on over fifty tanks worldwide. IEC’s floating cover is a cost-effective alternative to many aluminum or fiberglass dome applications and do not require venting ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
of the solution in the lagoons. Designed for simple installation and can be in situ above the water surface without draining the lagoon. This aerator is used for many various applications including bioreactors, activated sludge reactors, SBRs and fixed and variable level treatment ...
-
Manufactured by Industrial & Environmental Concepts, Inc. (IEC)based in USA
All of IEC cover products are custom designed for lagoon or tank applications. IEC has designed, fabricated and installed cover systems on over fifty tanks worldwide. IEC’s floating cover is a cost-effective alternative to aluminum or fiberglass dome applications and do not require venting (non-gas-collection applications), ...
-
Manufactured by Spilldam Environmental Inc.,based in USA
Floating baffle curtains are used in wastewater treatment lagoons and other predefined structures to increase retention time. Lagoon baffles divert the flow within an existing lagoon or pond creating a serpentine pattern that increases the practical treatment or settling area within the lagoon. A properly ...
-
Manufactured by Ultra Aquatic Technology Pty Ltd (UAT)based in AUSTRALIA
Designed specifically around sensitive environments, our Air Lift Dredge systems allow for gentle batch removal of mineral sediments, making them an excellent tool for ongoing or continual pond, dam, tank and lagoon maintenance. This design lifts sludge (with minimal disturbance) from the bottom of the impoundment while, at the same ...
-
Manufactured by SCM Tecnologiebased in ITALY
The high-speed floating aerators are designed for lagooning, variable level tanks, water storage basins and and for mixing tanks in general. The water pumping action results in the transfer of the oxygen obtained from the water chipping. The units may be easily added or relocated to other uses as changing customer requirements may ...
-
Manufactured by The Environmental Company Inc.based in USA
The basic goals in designing the bio-separator were to provide an economical and effective method for designing new lagoon systems, and upgrading existing lagoon systems to accept increased flows, as well as increasing the performance to meet treatment limits within the EPA ...
-
Manufactured by Environmental Fabrics de Mexico (EFM)based in USA
The basic goals in designing the bio-separator were to provide an economical and effective method for designing new lagoon systems, and upgrading existing lagoon systems to accept increased flows, as well as increasing the performance to meet treatment limits within the EPA ...
-
Manufactured by OverVerde Ltd.based in UNITED KINGDOM
Our unique design of fine bubble aeration equipment provide cost effective, efficient aeration for the raising of dissolved oxygen levels and increasing of water circulation in ponds, lakes and treatment lagoons. They have been designed to maximise air to water transfer while gently circulating the water, without disturbance to the ...
-
Manufactured by Fairfield Service Companybased in USA
The Aerated-Facultative Lagoon process is a natural solution to man made pollution. ADS purifies water the same way nature does. Our systems work like a rolling river, a process that has been going on for thousands of years. ADS can meet all existing or proposed effluent regulation very cost effectively without use of ...
-
Manufactured by Ciffa Systemesbased in FRANCE
Our floating covers are made of polypropylene foam and film to ensure good buoyancy, mechanical and chemical resistance. They are fixed to the peripheral wall or onto the existing membrane. Floating corridors are established to secure access any events and ...
-
Manufactured by Environmental Fabrics de Mexico (EFM)based in USA
Impermeable floating covers are made by using HDPE, XR-5, and PPR geomembranes. The covers can be utilized to help maintain better sanitary conditions for the storage of potable water and stop evaporation loss. Covers can also be used to capture methane gas from waste lagoons when you create a gas tight seal around the perimeter, then the ...
-
Manufactured by Fab-Seal Industrial Liners Incbased in USA
Fab-Seal Industrial Liners, Inc., has spent decades building a reputation as a trusted manufacturer and installer of membrane lining systems and water tank liners for a wide range of industrial uses and applications, including Pit, Pond and Lagoon ...
-
Manufactured by Smart Storm Ltd.based in UNITED KINGDOM
Tried and tested - Oil Mop Skimmers are an effective system for a series of applications. We are pleased to work with the leading manufacturer of Oil Mop Skimmers to provide system that are effective in the following applications: Food manufacturing - cooked meats, sauces, bread, dairy, beverages and other fats, oils and grease (FOG) removal in the effluent treatment process. Steel Production ...
-
Manufactured by Vaughan Company., Inc.based in USA
Jim Vaughan invented the first chopper pump back in 1960, after working on local dairymen"s pumps in his repair shop and realizing the need to "chop" the solids while ...
-
Manufactured by ThermaFab, Inc.based in USA
. Windows can be positioned to achieve the desired flow pattern in the ...
-
Manufactured by Envipurebased in SINGAPORE
ENVIPURE is specialized in anaerobic treatment of highly loaded industrial waste-water utilizing proprietary UASB-process that generates biogas at high yields. Challenges faced with climate change and energy insecurity due to fossil fuel scarcity have propelled the importance of biogas as a renewable energy source. ENVIPURE offers to industries a green technology that converts waste-water to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you