Water Resource Modeling Equipment For Water And Wastewater Available In Georgia (US)
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilcosep was designed to remove moisture and particulate contamination from steam and gas turbine lube oils. Self-sufficient stand-alone models with reservoir capacity ranging from 2,000 gallons to 12,000+ gallons and portable models as well as custom designs are ...
-
Manufactured by Dyhydromaticsbased in USA
The ShearJet HL60 electric hydraulic processor runs sample sizes from 3 to 100 mLs in distinct passes or continuous runs. Small dead volume, and no priming valve leads to reduced waste. By decreasing high pressure piping connections, leakage possibilities are reduced as well. The easy to use touch screen display puts simplicity at your fingertips, displaying relevant information in real time. ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Compact precipitation sensor with the tilting scales and pulse output (1 pulse = 0.1 l /m²) // 15 watt funnel defroster to remove solid precipitates (optional) // Mounting on a 2" mounting column or a cantilever ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-A-Type 4 and 206-A-Type 4 altitude control valves are based on the 106-PG or 206-PG main valve, and are ideal for maintaining a preset maximum water level. The valve functions as a two position control valve, either fully open or fully closed. The Type 4 allows normal forward flow to fill the reservoir to the maximum level, then closes drip-tight at the set-point. It opens to refill the ...
-
Manufactured by Agrishield LLC.based in USA
A PTO Power Pack can protect your tractor and expand its capabilities. Are you risking a huge repair bill? You might be and not even realize it. Not all tractors are equipped to handle the high-flow implements that have become common today. Ambient temperatures, daily usage, tractor model, age, reservoir size, and cooling capacity all significantly impact your tractor’s ability to run ...
-
Manufactured by Filtertechnik Ltdbased in UNITED KINGDOM
Filter Housing Specifications: Fluid compatibility: Petroleum based fluids, High Water Content, Invert Emulsions, Water Glycols, Phosphate Esters, Skydrol. Flow Rating: Up to 100 gpm (380L/min) for 150 SUS (32 cSt) fluids. Max. Operating Pressure: 100 psi (7 bar). Temp. Range: -20°F to 225°F (-29°C to 107°C). Bypass Setting: Cracking:Cracking: 30 psi (2 bar); Full Flow: 51 psi (4 ...
-
by DAMSATbased in UNITED KINGDOM
The DAMSAT system houses a collection of modules that cover different aspects of a dam or deposit. This means that DAMSAT can be adapted to meet the individual needs of each dam site. For each implementation, we assemble a collection of modules that are tailored to suit the situation on-the-ground and the particular user ...
-
by Thermochembased in USA
Alternatively, well flow testing is carried out using Tracer Flow Testing (TFT®) with fluids discharged into a low-cost atmospheric muffler or while on-line to a power plant. Several options for discharging wells are possible using a TFT® system, through a Blooie-line and drilling muffler, to an atmospheric muffler or rock pit, or to a power plant. Thermochem also provides low-cost ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Precipitation sensor with tilting scales and pulse output (1 pulse = 0.1 l /m²) // Robust, lockable, cast aluminum housing to protect against unauthorised access // 15 watt hopper heating for defrosting of solid precipitates (optional) // Interior heating for winter operation (optional) ...
-
Manufactured by ErtelAlsopbased in USA
The 10T Series Laboratory Filters are for use in laboratories to perform filtration trials and scalability studies. These Laboratory Filters are constructed of 316 stainless steel with stainless steel cylinders for pressures up to 50 PSIG, or a protected Pyrex® glass cylinder for filtration up to 30 PSIG. Stainless steel cylinders can be furnished with an optional heating or cooling jacket. ...
-
Manufactured by ErtelAlsopbased in USA
The 43T Series lab filter is for use in laboratories to perform filtration trials and scalability studies. These units are constructed of 316 stainless steel with stainless steel cylinders for pressures up to 50 PSIG, or a protected Pyrex glass cylinder for filtration up to 30 PSIG. Stainless steel cylinders can be furnished with an optional heating or cooling ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-A-Type 1 and 206-A-Type 1 altitude control valves are based on the 106-PG or 206-PG main valve and are ideal for maintaining a preset maximum water level. The valve functions as a two position control valve, either fully open or fully closed. The Type 1 allows normal forward flow to fill the reservoir to the maximum level and then closes drip-tight at the set-point. It opens to allow ...
-
Manufactured by Schroeder Industriesbased in USA
GRTB Tank-Mounted Filters, 100 psi (7 bar), 100 gpm (380 ...
-
by Thermochembased in USA
Geothermal wells are typically sampled for geochemistry at the wellhead, which only provides an average composition of the fluids from depth. Unless the well is pumped, sampling occurs after flashing and scale deposition. Downhole sampling allows vertical profiling of geochemistry with depth, so that each entry can be defined for reservoir model development and simulations. It can also identify ...
-
Manufactured by J & S Instruments, Inc.based in USA
The Single Point RTU is a micro-controller based data handling system similar to HPM series signal conditioning with the RS232/RS485 option. Sensor input options include, mvdc, madc, thermocouple, RTD bulbs, 0/5 amp AC/60HZ, strain gauge, pulse frequency, and pulse duration signals with corresponding input/ output specifications. Power requirements are different, instead of being a two wire ...
-
by 1PointFivebased in USA
Geologic sequestration is a proven method of underground carbon dioxide (CO2) storage whereby CO2 is injected deep underground into deep rock formations for long-term storage. By capturing CO2 and storing it into these reservoirs, operators can prevent the release of CO2 into the atmosphere—protecting the climate, the planet and future generations. Geologic sequestration has been in use ...
-
by Hydronia LLCbased in USA
The Urban Drainage (UD) model for QGIS GUI integrates the capabilities of the EPA-SWMM* Storm Drain model with RiverFlow2D model. This allows performing simulations of urban flooding with full and dynamic interaction of the surface runoff with the storm drain network routing. Presently, the UD module does not integrate surface water quality with the SWMM water quality option. You can ...
-
based in USA
The Storm Precipitation Analysis System (SPAS) is a state-of-the-science hydrometeorological tool used to characterize the magnitude, temporal, and spatial details of precipitation events. Over the past ten years, SPAS have been proven t0 be the most reliable and accurate tool available to analyze precipitation events. The results have been used and accepted in all PMP studies since 2002, in ...
-
Manufactured by Atlantic-Oasebased in USA
Pump Vaults house and protect the pumps and plumbing of underground water storage and circulation systems. Vaults are rotomolded of virtually indestructible polyethylene for long, worry-free service. Sized to accommodate multiple pumps, Vaults also house Ionizers, Check Valves and Auto Fill Valves. Tight fitting covers and generous openings provide easy, secure access to pump and plumbing and ...
-
Manufactured by Wastewater Evaporatorsbased in USA
Oil / water separators are designed to remove all free and dispersed non-emulsified oil and some settleable solids from waste streams. If emulsified or dissolved oils are present in the waste water additional downstream filtration may be required. The principal function of the oil / water separator is to remove gross quantities of free oil before further treatment. In this capacity, the oil / ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you