Water Resource Modeling Equipment For Water And Wastewater Available In Pennsylvania
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilcosep was designed to remove moisture and particulate contamination from steam and gas turbine lube oils. Self-sufficient stand-alone models with reservoir capacity ranging from 2,000 gallons to 12,000+ gallons and portable models as well as custom designs are ...
-
Manufactured by Dyhydromaticsbased in USA
The ShearJet HL60 electric hydraulic processor runs sample sizes from 3 to 100 mLs in distinct passes or continuous runs. Small dead volume, and no priming valve leads to reduced waste. By decreasing high pressure piping connections, leakage possibilities are reduced as well. The easy to use touch screen display puts simplicity at your fingertips, displaying relevant information in real time. ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Compact precipitation sensor with the tilting scales and pulse output (1 pulse = 0.1 l /m²) // 15 watt funnel defroster to remove solid precipitates (optional) // Mounting on a 2" mounting column or a cantilever ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-A-Type 4 and 206-A-Type 4 altitude control valves are based on the 106-PG or 206-PG main valve, and are ideal for maintaining a preset maximum water level. The valve functions as a two position control valve, either fully open or fully closed. The Type 4 allows normal forward flow to fill the reservoir to the maximum level, then closes drip-tight at the set-point. It opens to refill the ...
-
Manufactured by Agrishield LLC.based in USA
A PTO Power Pack can protect your tractor and expand its capabilities. Are you risking a huge repair bill? You might be and not even realize it. Not all tractors are equipped to handle the high-flow implements that have become common today. Ambient temperatures, daily usage, tractor model, age, reservoir size, and cooling capacity all significantly impact your tractor’s ability to run ...
-
Manufactured by Filtertechnik Ltdbased in UNITED KINGDOM
Filter Housing Specifications: Fluid compatibility: Petroleum based fluids, High Water Content, Invert Emulsions, Water Glycols, Phosphate Esters, Skydrol. Flow Rating: Up to 100 gpm (380L/min) for 150 SUS (32 cSt) fluids. Max. Operating Pressure: 100 psi (7 bar). Temp. Range: -20°F to 225°F (-29°C to 107°C). Bypass Setting: Cracking:Cracking: 30 psi (2 bar); Full Flow: 51 psi (4 ...
-
by DAMSATbased in UNITED KINGDOM
The DAMSAT system houses a collection of modules that cover different aspects of a dam or deposit. This means that DAMSAT can be adapted to meet the individual needs of each dam site. For each implementation, we assemble a collection of modules that are tailored to suit the situation on-the-ground and the particular user ...
-
by Thermochembased in USA
Alternatively, well flow testing is carried out using Tracer Flow Testing (TFT®) with fluids discharged into a low-cost atmospheric muffler or while on-line to a power plant. Several options for discharging wells are possible using a TFT® system, through a Blooie-line and drilling muffler, to an atmospheric muffler or rock pit, or to a power plant. Thermochem also provides low-cost ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Precipitation sensor with tilting scales and pulse output (1 pulse = 0.1 l /m²) // Robust, lockable, cast aluminum housing to protect against unauthorised access // 15 watt hopper heating for defrosting of solid precipitates (optional) // Interior heating for winter operation (optional) ...
-
Manufactured by ErtelAlsopbased in USA
The 10T Series Laboratory Filters are for use in laboratories to perform filtration trials and scalability studies. These Laboratory Filters are constructed of 316 stainless steel with stainless steel cylinders for pressures up to 50 PSIG, or a protected Pyrex® glass cylinder for filtration up to 30 PSIG. Stainless steel cylinders can be furnished with an optional heating or cooling jacket. ...
-
Manufactured by ErtelAlsopbased in USA
The 43T Series lab filter is for use in laboratories to perform filtration trials and scalability studies. These units are constructed of 316 stainless steel with stainless steel cylinders for pressures up to 50 PSIG, or a protected Pyrex glass cylinder for filtration up to 30 PSIG. Stainless steel cylinders can be furnished with an optional heating or cooling ...
-
Manufactured by Vortox Air Technology, Inc.based in USA
The GA series, similar to the G series in body style, provides a large dust holding capacity and makes intake noise minimal. The GA style is designed for service on engines and compressors where a direct connection can be made with companion flanges. GA air cleaners are suitable for direct vertical mounting. Due to its flanged connection, the cleaner does not require the support of mounting bands ...
-
Manufactured by Bionomic Industries Incbased in USA
Bionomic Industries exclusive VentClean Scrubber is specifically designed to scrub storage tank and railcar vent emissions caused by breathing and filling operations, and is the latest edition to our enormously successful ScrubPac family of 'packaged' scrubber systems. ...
-
Manufactured by SALVAJORbased in USA
Salvajor offers unique solutions when a traditional pre-rinse or fresh water trough simply can’t keep up. The typical conveyor dish machine is rated at 210-230 racks per hour, while the average operator using a pre-rinse hose can scrap 25-30 racks per hour. Salvajor solves this problem by offering a full line of advanced scrapping solutions. The traditional pre-rinse hose or fresh water ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Robust precipitation sensor operating according to the tipping-scale principle // High measurement accuracy for all types of precipitation (drizzle, heavy rain, sleet, snow etc.) // Heating ring to prevent ice formation or snow caps // WMO-Compliant // Windscreen for exposed locations (optional) ...
-
Manufactured by ErtelAlsopbased in USA
The 21T Series lab filter is for use in laboratories to perform filtration trials and scalability studies. These units are constructed of 316 stainless steel with stainless steel cylinders for pressures up to 50 PSIG, or a protected Pyrex glass cylinder for filtration up to 30 PSIG. Stainless steel cylinders can be furnished with an optional heating or cooling ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-A-Type 1 and 206-A-Type 1 altitude control valves are based on the 106-PG or 206-PG main valve and are ideal for maintaining a preset maximum water level. The valve functions as a two position control valve, either fully open or fully closed. The Type 1 allows normal forward flow to fill the reservoir to the maximum level and then closes drip-tight at the set-point. It opens to allow ...
-
Manufactured by Schroeder Industriesbased in USA
GRTB Tank-Mounted Filters, 100 psi (7 bar), 100 gpm (380 ...
-
by Thermochembased in USA
Geothermal wells are typically sampled for geochemistry at the wellhead, which only provides an average composition of the fluids from depth. Unless the well is pumped, sampling occurs after flashing and scale deposition. Downhole sampling allows vertical profiling of geochemistry with depth, so that each entry can be defined for reservoir model development and simulations. It can also identify ...
-
Manufactured by J & S Instruments, Inc.based in USA
The Single Point RTU is a micro-controller based data handling system similar to HPM series signal conditioning with the RS232/RS485 option. Sensor input options include, mvdc, madc, thermocouple, RTD bulbs, 0/5 amp AC/60HZ, strain gauge, pulse frequency, and pulse duration signals with corresponding input/ output specifications. Power requirements are different, instead of being a two wire ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you