surface water sampling Equipment

46 Results found
Only show results available in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: Water Resources ×

  • Keyword: surface water sampling ×

AMS - Piezometer Groundwater Sampling Kit

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     based in American Falls, IDAHO (USA)

The AMS “Piezometer Groundwater Sampling Kit” was designed in response to our clients’ need for a manually-operated sampling kit, capable of providing a semi-permanent sampling point for water level measurements and shallow groundwater sampling investigations. This complete kit includes everything needed to take groundwater ...

IC Controls - Model 540 - 24 Volt DC Power Supply

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

The 540 continuous duty industrial supply comes in an IP65 (NEMA 4X) surface type 10x10x5 cm (4x4x2 inch) water-shedding and corrosion-resistant PVC housing, that can be easily surface mounted in the plant to supply up to six 24 VDC 4-20 mA loops. The 540 supply powers loop series devices such as two-wire transmitters, PID controllers, ...

Suspended Load Sampler, Delft Bottle Type

by Eijkelkamp Soil & Water     based in Giesbeek, NETHERLANDS

This sampler is used to measure suspended sediment transport in rivers and other water courses, from the surface down to 0.1 m above the river bottom. The sediment containing water flows through a bottle shaped sampler. The shape of this sampling body induces a low pressure at the rear face in such a way, that the water enters the nozzle of the ...

Hester-Dendy Multiple Plate Samplers

by Forestry Suppliers, Inc.     based in Jackson, MISSISSIPPI (USA)

These multiple plate samplers are designed for substrata sampling of macroinvertebrate organisms found in rivers, streams, lakes, and tidal flats. Hardboard plates are divided by special nylon spacers and when left in place for about two weeks will attract a good collection of insect larva and other organisms. Plates have smooth surfaces on each ...

WaterMark Universal Core Head Kit Sediment Sampler

by Forestry Suppliers, Inc.     based in Jackson, MISSISSIPPI (USA)

Recover high quality cores of water-sediment interface with this universal core head kit. The core head drives clear, virtually unbreakable polycarbonate barrels into sediments, resulting in long cores with minimal effort and sample compression. The one-way check valve permits the barrel to free flush during deployment and also retains the core ...

Model SP200 - Peristaltic Sampling Pump

by Global Water Instrumentation, Inc. - a Xylem brand     based in Gold River, CALIFORNIA (USA)

Global Water's SP200 variable speed portable peristaltic pump sampler is ideal for removing samples from shallow wells and surface water, including lakes, ponds, and holding pools. The water sampler is lightweight, rugged, easy to use, weather resistant, and requires minimal maintenance. The manually-operated peristaltic pump can backflush the ...

Friend Instrument - Model FDT-1001 - automatic surface tension meter

by Changsha Friend Instrument Co.Ltd     based in Changsha, CHINA

Scope of applicationThe method according to GB6541 requirements, a new technology designed for the new generation of tension tester. The sample temperature can be precisely controlled and accurate measurement of various liquids on the surface tension of water and mineral oil interfacial tension.

Comprehensive Scan Sample Collection Kit

by Environmental Testing and Research Laboratories, Inc     based in Leominster, MASSACHUSETTS (USA)

Powerful testing for surface water and deep well sources. Tests for 61 volatile organic compounds (including MTBE) as well as the common causes of unhealthy and low quality water. This is the best test for determining general water quality.

YSI - Model 600R - Water Quality Sampling Sonde

by YSI - a Xylem brand     based in Yellow Springs, OHIO (USA)

The YSI 600R provides water quality sampling in a small package for surface water and ground water applications. With a diameter of less than two inches (4.2 cm), the 600R easily fits into wells.

iQwtr - Surface Water Quality Measure Device

by BlueLeg Monitor BV     based in JG Sneek, NETHERLANDS

The iQwtr is a simple yet smart device enabling citizens to measure surface water quality on the spot by simply taking a picture of water in the iQwtr device with the iQwtr App. Take a water sample with the iQwtr container, make a picture with the smart phone, transfer the data for analysis to our server and receive feedback on the quality of the ...

Liqui Sampler

by Bürkle GmbH     based in Bad Bellingen, GERMANY

LiquiSampler for liquids, according to DIN EN ISO 15528. Made of ultra pure and chemically inert PTFE/FEP or

Sirco - Model SC S - Sample Cooler

by SIRCO Controls Ltd.     based in Rochford, UNITED KINGDOM

The SIRCO Sample Cooler has proved to be one of the most efficient heat exchangers in the instrument industry. With over 2.5 metres of Stainless Steel tube wound to a unique SIRCO designed double helical coil giving a heat transfer surface of 720 cm2, this is the ideal unit for users requiring an efficient controlled cooler for liquids or gases. ...

Hydrometry - Surface & Ground water Level & quality

by Earth Link & Advanced Resources Development (ELARD)     based in Charlotte, NORTH CAROLINA (USA)

For efficient and accurate aquifer study, short and long term monitoring and data logging of hydrological sites, ELARD offers rugged and efficient sampling and monitoring equipment from different suppliers. These monitoring equipment and probes can be used for profiling, sampling, permanent data logging, and can be installed together with stand ...

Model MC-400 - Multi-Corer for Sediment and Water Samples

by Ocean Instruments, Inc.     based in San Diego, CALIFORNIA (USA)

Delivers undisturbed sediment and water samples to the surface. MC-400 Hedrick/Marrs Multi-Corer is specifically designed to retrieve sediment and water samples in lakes and shelf waters. It is constructed of anodized aluminum and carries four individually sealing Polycarbonate sample tubes. The sample tubes are sealed with a silicone rubber upper ...

Model SP100 - Water Sampler

by Global Water Instrumentation, Inc. - a Xylem brand     based in Gold River, CALIFORNIA (USA)

The portable water sampler is ideal for removing samples from shallow wells and surface water sources, including lakes, ponds, and holding pools. The water sampler is lightweight, rugged, easy to use, weather resistant, and requires minimal maintenance. The water samplers are designed to take a manual sample and they have the ability to backflush ...

Model SP250 - Quick Release Water Sampler

by Global Water Instrumentation, Inc. - a Xylem brand     based in Gold River, CALIFORNIA (USA)

The quick release water sampler is ideal for sample removal from wastewater, shallow wells and surface water, including lakes, ponds, and holding pools. The water sampler is lightweight, rugged, easy to use, weather resistant, and requires minimal maintenance. The peristaltic pump is designed to take a manual sample and has the ability to back ...

Surface Mount LED

by Crystal IS, Inc.     based in Green Island, NEW YORK (USA)

Our limited release engineering samples are available today.  Crystal IS surface mount LEDs are ideal for applications in water and food disinfection, and air purification. Our unique, patented LED technology delivers the most efficient LEDs with the longest lifetimes in the UVC wavelengths from 250 to 280 nm. We achieve the superior ...

Advanced Water Purification and Innovative Water Sampling

by Western Research Institute (WRI)     based in Laramie, WYOMING (USA)

Municipal waste water treatment facilities and government agencies are increasingly concerned with the existence of bacteria, viruses and emerging contaminants such as hormones and pharmaceuticals in drinking water. To effectively concentrate these toxic constituents during sampling and rapidly remove them, WRI has developed a nano-structured ...

Thetis Autonomous Moored Platform - Water Column Profiler

by Sea-Bird Scientific - a subsidiary of Danaher Corporation     based in Bellevue, WASHINGTON (USA)

The Thetis Profiler is a submersible vertically profiling platform for use in coastal marine and fresh water environments. The purpose of the platform is to sample the water column distributions of physical, biological, chemical and optical properties at a fixed geographical location over extended periods of time. The system provides sub-meter ...

OTT - Thalimedes Shaft Encoder

by OTT Hydromet - a member of Hach Company     based in Kempten, GERMANY

The OTT Thalimedes float-operated shaft encoder level sensor and logger provides proven water level measurements in continuous, unattended monitoring in ground and surface water applications. The Thalimedes is a very low cost solution for new measuring sites and is extremely easy to connect to existing paper chart recorders, making a digital ...

Related Terms for surface water sampling

Need help finding the right suppliers?

Let the XPRTs do the work for you