Water Risk Applications

13 Results found
Only show results available in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: Water Risk ×

Offering historical climate data, current weather conditions & seven-day forecastes for government sector

by Weather Analytics     based in Bethesda, MARYLAND (USA)

From aviation to public safety to weather disaster response, Weather Analytics provides historical climate data, current weather conditions, and seven-day forecasts for anywhere in the world. Weather Analytics supports operations, management and decision-making with comprehensive historical climate data and accurate forecast conditions – perfect for profiling and predicting risk.

Electrodeionization

by QUA Group LLC     based in Canonsburg, PENNSYLVANIA (USA)

The Fractional Electrodeionization (FEDI) process is an advancement of conventional EDI. The patented dual voltage process allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant& design economics and reliability. By incorporating a two-stage separation process with different voltages the FEDI process is able to: Achieve a higher hardness tolerance by having distinctly different concentrate chambers with separate reject streams and thus reducing the potential of hardness scaling. Optimize power consumption by using higher electrical current only where required. Ensure the best water quality, continuously consistently by removing a major part of the deionization load in the hardness removal zone, while residual ionic impurities are effectively removed in the silica removal zone;, which stays in a polishing mode.

FEDI - Electrodeionization

by QUA Group LLC     based in Canonsburg, PENNSYLVANIA (USA)

The Fractional Electrodeionization (FEDI) process is an advancement of conventional EDI. The patented dual voltage process allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant’s design economics and reliability. By incorporating a two-stage separation process with different voltages the FEDI® process is able to: Achieve a higher hardness tolerance by having distinctly different concentrate chambers with separate reject streams and thus reducing the potential of hardness scaling. Optimize power consumption by using higher electrical current only where required. Ensure the best water quality, continuously & consistently by removing a major part of the deionization load in the ‘hardness removal zone’, while residual ionic impurities are effectively removed in the ‘silica removal zone’, which stays in a polishing mode.

Vacuum excavation solutions for micro-tunneling / foundation stabilization sector

by Vac-Tron Equipment     based in Okahumpka, FLORIDA (USA)

Vac‐Tron vacuum excavation equipment can be used for the application of Micro‐Tunneling and/or Foundation Stabilization. Microtunneling is used to construct small tunnels. This process enables access to plumbing, electrical wiring, termite repair, flooding, crawl space and historical restoration without compromising the integrity of the foundation. By using the “soft‐dig” technique under the foundation or slab, there is no risk of damaging any previous utilities or structural damage to the building. The debris removed will only have to be handled one time. This process would be best served with the Vac‐Tron AIR855 model to accommodate the volume of debris, as well as having the flexibility of back‐filling with the dirt that was removed after the process has been completed.

Smoke generator device for maritime shipboard fire training

by Concept Smoke Systems     based in Maidenhead, UNITED KINGDOM

A fire at sea can be devastating. Ensuring that crews are trained in safe but highly realistic conditions can help them tackle a real fire with greater speed, efficiency and confidence - minimising the damage to the ship, its cargo and of course risk to life.

Non-chemical water treatment in hospitals

by Fluid Dynamics International Ltd     based in Maidenhead, UNITED KINGDOM

Hospitals using hardwater can suffer from serious scaling in water heaters , sterilisers and elsewhere. Fluid Dynamics has a simple non chemical solution to the problems of hospital scaling. Fluid Dynamics also has solutions to the problems of legionella risk in hospitals

Wastewater Testing for the the Water Treatment Industry

by AQUAREAD Limited     based in Broadstairs, UNITED KINGDOM

There is strict regulation surrounding waste water discharge so it’s very important to conduct waste water testing in waste water environments. Aquatic ecosystems are sensitive to even small changes in the chemical make up of the water, temperature, etc. Water parameter testing before discharge allows any pollutants to be detected and prevented from entering the watercourse. Real time testing allows quick action and minimises the risk of any potential fines that might be imposed by regulatory bodies should there be any regulatory violations. The rugged AP-2000 protects the electrodes during deployment and allows all the essential parameters to be tested while it’s portable design means that the device can be easily carried between locations. You can also save money on site visits by using telemetry.

Circuits Protections; nozzles, Injectors, etc. for filtration.

by Sistema Azud, S.A.     based in Alcantarilla, SPAIN

The installation of an AZUD System eliminates the risk of clogging of nozzles, injectors, tubes and other small openings by removing the larger particles from the liquid flow.  It also helps in decreasing scale build up in the system and the accumulation of solids settling in the collection sump.

Tube bundle cleaning

by NLB Corp.     based in Wixom, MICHIGAN (USA)

Problem: Heat exchanger systems lose efficiency when deposits build up in, and on, tube bundles. High-pressure water jetting cleans both I.D. and O.D. very effectively, but manual methods clean a limited area at a time and expose operators to strain and risk.

Advanced Ultrafiltration Modules

by QUA Group LLC     based in Canonsburg, PENNSYLVANIA (USA)

The Q-SEP Ultrafiltration membranes incorporate high-strength, hollow fibers that deliver superior performance without the risk of fiber breaks. They are made from a hydrophilic polyether sulfone material with excellent low fouling characteristics. These hollow fiber membranes operate under a pressurized inside-out flow configuration for superior performance. These hollow fiber UF membranes offer reliable removal of turbidity, microorganisms & viruses. Turbidity can be reduced to less than 0.05 NTU. Typically, a 6-log removal for bacteria, giardia & cryptosporidium, while a 4-log removal for viruses, can be achieved. The Q-SEP modules contain an advanced UF fiber, prepared by an innovative patented cloud point precipitation method. This method ensures a very uniform pore size distribution and high pore density in the membrane. As a result, the product water quality from the modules is significantly better than the quality from conventional UF modules at a very operating pres

Power-independent flow measurement with GPRS

by NIVUS GmbH     based in Eppingen, GERMANY

In a pit water purification system it was necessary to detect the discharge volumes. The operator wanted a regular and automatic transmission of readings. On the selected measurement place no mains power connection was available. Due to the risk of vandalism, it was not planned to install a switching cabinet. See the NIVUS solution for this measurement task here.

Water filtration with UV purification for offices

by Waterlogic International Ltd     based in Basingstoke, UNITED KINGDOM

Give your staff the cleanest, purest water from the office water cooler; Your employees deserve the best water from their office water cooler dispensers. Dehydration reduces mental and physical ability and leads to sudden fatigue. Waterlogic office water cooler dispensers can transform the workplace with a continuous supply of clean, fresh, great-tasting water.

EDI Solutions

by QUA Group LLC     based in Canonsburg, PENNSYLVANIA (USA)

QUA’s FEDI® (Fractional EDI) stacks have superior hardness tolerance compared to the other EDI products on the market. With a dual voltage process this allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant's design economics and reliability. FEDI stacks are available in three different models which can be applied either for higher hardness tolerance or high water flow rates. MEGA FEDI stacks are ideal for large capacity, high flow systems normally required in heavy industrial projects such as power, petrochemicals, & electronics for high purity water needs. Each stack can handle treated water flow of up to 75 GPM . MEGA FEDI’s unique stackable design minimizes piping, reduces footprint, and makes it simple and easy to install on skids. FEDI-Rx products are specially designed for applications in pharmaceutical, biomedical and laboratory applications where installations require hot water sanitization to meet

Need help finding the right suppliers?

Let the XPRTs do the work for you