Showing results for: Sediment Sampling Equipment
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sampling tube for multisampler acrylic, Ø 50 x 5 mm, length 1 m, contents 1.14 ...
-
Manufactured by SURECHEM SDN. BHD.based in MALAYSIA
table this process is accelerated however, sonic sampling gives extremely nice cores even in sandy and fine gravel. Through the high frequency vibrations just a small part of the sample area outside is affected by the vibrations. A recovery rate of 95% often will be reached. Another big advantage of Sonic ...
-
PremiumManufactured by KISTERSbased in GERMANY
DH59 is an easy-to-use medium-weight suspended sediment sampler. The sampler consists of an epoxy coated, streamlined bronze casting weighing approx. 10 kg, which partially encloses the sample container. It is equipped with a tail vane assembly to orient the intake nozzle into the approaching flow as the sampler enters the water. ...
-
PremiumManufactured by AMS, Inc.based in USA
Easily collect sludge samples from the bottom of petroleum tanks with this unique & user friendly sampling kit. Based on the popular design of the ‘AMS Multi-Stage Sediment Sampling Kit’, the components in this kit are similar, only they are made from lightweight aluminum. This proves to be crucial, as often times ...
-
PremiumManufactured by AMS, Inc.based in USA
Professional Series Multi-Stage Sediment/Sludge Sampler Kit! This sampling kit provides all of the components needed to collect sludge and sediment samples 3” in diameter & up to 24” in length. The 12" long (female/female threaded) base section and (1) extra 12” (male/female threaded) body section allows you ...
-
PremiumManufactured by AMS, Inc.based in USA
Stops caving sediment! Use this manually-driven sampler for discrete interval sediment sampling in rivers, lakes, wetlands, and estuaries. To obtain a sample, the sampler is lowered to the surface as a dual tube or driven down to the desired depth where sampling is to begin below the surface. Upon reaching the ...
-
PremiumManufactured by AMS, Inc.based in USA
Professional Series Multi-Stage Sediment/Sludge Sampler Kit! This sampling kit provides all of the components needed to collect sludge and sediment samples up to 4' in length. The 12" base section and three extra body sections allow you to assemble a sampler that is 12", 24", 36", or 48". in length. This kit was designed for soil ...
-
Manufactured by Ocean Instruments, Inc.based in USA
Delivers undisturbed sediment and water samples to the surface. MC-400 Hedrick/Marrs Multi-Corer is specifically designed to retrieve sediment and water samples in lakes and shelf waters. It is constructed of anodized aluminum and carries four individually sealing Polycarbonate sample tubes. The ...
-
PremiumManufactured by KISTERSbased in GERMANY
The lightweight hand sampler DH48 is used for the collection of suspended sediment samples by wading rod suspension. The easy-to-use sampler consists of an epoxy coated, streamlined aluminium casting (weighing approx. 2 kg), which partially encloses the sample container. An intake nozzle extends horizontally from the nose of the sampler ...
-
PremiumManufactured by AMS, Inc.based in USA
The Russian Peat Borer (7.5 cm x 60cm model shown) is a side filling chambered-type sampler. This discrete point sampler enables one to drive the sampler to any point in the sediment profile in the closed (empty) position. Once the target depth is reached, the “T” handle is turned clockwise to initiate the sampling while the ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS multi-stage sludge sampler, multi-stage sludge core tip, 12" multi-stage SCS base, three 12" multi-stage SCS sections, three 4' extensions, plastic liner, plastic end caps, 2" soil core catcher, universal slip wrench, two crescent wrenches, SST cross handle, slide hammer, and the AMS deluxe carrying ...
-
Manufactured by Aquatic BioTechnology S.L.based in SPAIN
The Van Veen grab SG is designed for collecting sediment samples in fresh and marine water, from soft or medium-hard bottoms like sand, gravel, consolidated marl or clay. It consists of two buckets connected by a hinge. During the descent, the two buckets remain apart. When it hits the bottom, the locking mechanism releases, and when the main ...
-
Manufactured by Ocean Scientific International Ltd (OSIL)based in UNITED KINGDOM
The Box Corers are simple and reliable corers for sampling an areas of 0.05m2 (Mini), 0.1m2 (Standard), 0.25m2 (Mega) or 0.5m2 (Giant) of sediment with minimal disturbance and sample contamination. Its unique double shovel design allows easy access to the sediment for sub-sampling for subsequent scientific ...
-
Manufactured by Ocean Scientific International Ltd (OSIL)based in UNITED KINGDOM
The OSIL range of Multiple Corers combine the flexibility of four models with a suite of features for undisturbed sediment sampling. The Corers can collect multiple high-quality undisturbed sediment samples which include the sediment /water interface and overlying supernatant water. Using a unique hydrostatic ...
-
Manufactured by PSP Soilsearch Equipment Pvt. Ltd.based in INDIA
The stainless steel bailer samplers have been developed to sample still water (or other fluids) at any required depth. The bailer sampler consists of a stainless steel tube, open at the top-end and fitted with an unscrewable cap at the bottom. A one way valve is fitted at the bottom. As soon as the water sampler is lowered it can be lifted ...
-
Manufactured by PSP Soilsearch Equipment Pvt. Ltd.based in INDIA
This type of soil auger is by far the most used auger. The typical design of the Euro design auger allows for a minimum of friction during penetration into the soil, and the extraction of the auger from the soil, which means less physical ...
-
Manufactured by PSP Soilsearch Equipment Pvt. Ltd.based in INDIA
The piston sampler differs completely in design and application from the augers described before and is very suitable for sampling less cohesive soil layers (sand) below the groundwater table. The piston sampler is also suitable for sampling sediments with a sand ...
-
Manufactured by HyQuest Solutionsbased in GERMANY
HyQuest Solutions’ easy-to-use rising stage sampler RSS is the ideal device for the automatic collection of samples from flashy, intermittent streams at remote or not easily accessible sites, which are visited by personnel at infrequent ...
-
Manufactured by PSP Soilsearch Equipment Pvt. Ltd.based in INDIA
The spiral auger operates similar to a corkscrew and does not cut off the soil. The auger is usually applied when hard layers need to be penetrated. The spiral auger has a negative end, i.e. the centre of the auger end is whetted ...
-
Manufactured by HyQuest Solutionsbased in GERMANY
The lightweight hand sampler DH48 is used for the collection of suspended sediment samples by wading rod ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you