Water Surge Equipment For Water And Wastewater Near Massachusetts
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-VAC Vacuum Flushing System is designed to flush storm water, surface water, combined sewage/storm, raw sewage storage tanks, and equalization basins. The ACU-VAC can be used in circular storm tanks (up to 65m diameter), rectangular storm tanks (up to 150m in length), and sewer networks (up to 250m in length). The ACU-VAC is designed to have a tank floor gradient between 0.5-2%. ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The Enviroquip folded plate filter underdrain is synonymous with proven performance in gravity filtration. A low profile and media retaining design allows for deeper media stacks than what is available with other underdrains. Our 0.25mm openings place filter media directly on the underdrains and air laterals. The uniform introduction of air and water through separate conduits provides superior ...
-
Manufactured by Garrison Flood Control, a Division of Garrison Systems, LLCbased in USA
The Beluga Bag barrier is a unique flood control system that is ideal for protection of important property and infrastructure. Oversized Beluga bags can be used for flood control, levee height extension, water and stream diversion, blast protection, erosion control, storm surge protection, berm construction, and much more. The Beluga bag barrier is a concertina style big bag system, consisting of ...
-
Manufactured by McCrometer, Inc. - Veraltobased in USA
The FPI electromag flow meter is ideal for capital or maintenance projects, retrofits and sites that have never before been metered. The unique combination of accuracy, ease of installation and total cost savings make the FPI Mag the perfect choice for a wide range of Municipal and Industrial Applications. McCrometer’s multi-electrode design and unique operating principle, delivers accuracy ...
-
Manufactured by Armas Su Armaturleri San ve Tic ASbased in TURKEY
Armaş “DIFL” model differential float level control valve is the hydraulic control valve designed to control water level in reservoirs and tanks in desired ranges. Main valve is closed as wholly sealed without surge when water reach desired level thanks to 4/3 way differential control pilot. Max. and min. water level in reservoir may be adjusted to desired value in a wide range. ...
-
Manufactured by Armas Su Armaturleri San ve Tic ASbased in TURKEY
Armaş “FL” model float level control valve is the hydraulic control valve designed to control water level in reservoirs and tanks continuously. Main valve is controlled by 2-way modulating type float pilot valve manually. Main valve mounted on reservoir and tank upstream is closed as fully sealed without causing surge when water level reaches to maximum level. Valve ...
-
Distributed by Qwater Well Developer (QWD)based in USA
While exhibiting at several large water well tradeshows, including the Florida Ground Water Association’s South Atlantic Well Drilling Jubilee, held in Myrtle Beach, and at the National Groundwater Convention and Tradeshow in Las Vegas, there were many requests for larger, heavy-duty well development tools; and plans for a Production Series began. These developers were designed primarily ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
RBC flumes are used to measure the quantity of water that, for instance, flows through an irrigation channel. By comparison to known flumes, such as the WSC- and the Parshall flume, the RBC flume is the most accurate. The RBC flume has been specially designed for use in smaller water ways or earthen channels (irrigation channels, in- outlets, furrow, ditches, etc.). The RBC flume is a simple and ...
-
Manufactured by Lindsay Corporationbased in USA
The BlackMAX system by Watertronics is the industry's leading High Density Polyethylene (HDPE) submerged pump system. Our unique, patented technology is available in either single or multi-pump configurations and delivers precise flow and pressure to any irrigation or water feature application. Simplex, Duplex, and Triplex models available to handle a wide variety of irrigation applications from ...
-
Manufactured by Norair Engineering Corp.based in USA
The project required caisson foundations for two 30ft. dia. spherical tanks, 60” dia. steel welded water mains, construction of a pump and control building, compressed air surge control system and pump control valve replacement at the Potomac Water Treatment Plant in Potomac, ...
-
Manufactured by REHAU Ltdbased in GERMANY
Next-generation reliability, safety and the industry's fastest installation method. You promise a reliable plumbing system. When your customer is counting on you, you’re counting on the system you install to deliver on that promise with secure connections from start to finish. We back you up on it. Uniquely designed for quick, consistent, secure connections in any weather, EVERLOC+® ...
-
Manufactured by GA Industries, LLCbased in USA
Electric Check Pump Control Valves are installed on the discharge of a water pump to control surges associated with the starting and stopping of the pump. This rugged and versatile piston control valve provides superior design, simple operation, and maximum performance in water control. ...
-
Distributed by Coastal Controls & Instrumentation Inc. (CCII)based in CANADA
The Atlas is Orion's standard, high performance magnetic level indicator. Atlas is a single chamber design with either 2', 2.5', or 3' chamber diameter, as required by the application. There are twelve basic configuration styles, including top mount models. Atlas magnetic level indicators are produced in a wide range of materials of construction, including plastics. Orion also offers one of the ...
-
Manufactured by Blacoh Fluid Control, Inc.based in USA
Remove Pulsations for Smooth Fluid Flow. Prevent Vibration and Water Hammer. Improve System Performance and Reliability. Choose SENTRY™ Pulsation Dampeners & Surge Suppressors. SENTRY pulsation dampeners and surge suppressors remove virtually all system shock to enhance performance, reliability and safety in municipal and industrial pumping applications. Prevent water hammer, minimize ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Pneumatic and electric actuators can be easily fitted on our ball, multi-port, and butterfly ...
-
Manufactured by A & J Mixing International Inc.based in CANADA
A & J Mixing manufactures a variety of industrial hoppers: weigh hoppers and discharge hoppers, hoppers for feeding, intermediate storage, receivers, . We have experience with many materials and know how in design. Hopper design has to fit the process requirements. We model all our industrial hoppers with the angle of repose to determine true volume. In places where height is tight, we ...
-
Manufactured by IC Controls Ltd.based in CANADA
Log your ppb sodium (Na+) levels using a Thermo Orion Sodium Monitor, Model 2111XP. Log your ppb sodium measurement levels using a precalibrated Thermo Orion 2111XP sodium monitor that can handle your critical calcium sample checks. This rental unit comes with both the logger and the monitor, and it's sodium sensors mounted in a dual purpose shipping case/stand (42' x 29' x 22', approx 246 lb.) ...
-
Manufactured by International Valve Marketing, LLC.based in USA
The Vent-Tech Model WTW clean water valve combines thirteen years of manufacturing experience with advanced Patent Pending flow designs. The Model WTW was engineered to expand and improve the technological advances of the flat float air/ vacuum ...
-
Manufactured by Century Instrument Companybased in USA
This self-contained, spring loaded diaphragm pressure relief valve is self-operated and requires no air pressure or other outside power source to function. Available in sizes 1/2" through 8" in a wide variety of body materials, linings and diaphragms and with pressure relief settings from 10 to 150 ...
-
Manufactured by Century Instrument Companybased in USA
This self-contained, spring loaded diaphragm pressure relief valve is self-operated and requires no air pressure or other outside power source to function. Available in sizes 1/2' through 8' in a wide variety of body materials, linings and diaphragms and with pressure relief settings from 10 to 150 psig. Ideal for applications such as the protection of piping systems of plastic or glass against ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you