Only show results in Connecticut? Ok

hot water tank (Water Tanks) equipment

  • Hot Water Tanks

    Hot water tanks are needed by industries that require a constant supply of hot water. Water will be stored in the tanks when demand in low thus providing the necessary supply in times of maximum demand. These tanks offer exceptional efficieny and economy for commerical/ institutional facilities and are NSF approved for potable drinking water.

    By Portable Tank Group - a division of GEI Works based in Sebastian, FLORIDA (USA). from Steel Tanks Product line

  • Hot Water Tanks

    Highland Hot Water Tanks are ASME code certified for use in commercial and industrial applications where a constant supply of hot water is desired. Water can be heated and stored in the water holding tank during periods of low demand and will then be available for use when demand for hot water is higher, allowing for efficient use of energy while ...

    By GEI Works, Inc. based in Sebastian, FLORIDA (USA). from Steel Tanks Product line

  • TiSUN - Model BE-SSP-E - Hot Water Tanks

    hen only service water is being heated by solar heat, the solar hot water tank provides optimal support to the collectors and additional heating. It corresponds fully to all hygienic requirements with its high-quality enamelling.

    By TiSUN GmbH based in Söll, AUSTRIA. from Solar Tanks Product line

  • TiSUN - Model BE-SSPK - Hot Water Tanks

    TiSUN‘s ‘small‘ tank is particularly suited to wall mounting. With a tank volume of 75 to 195 litres, it saves a great deal of space and can also be installed retrospectively in bathrooms. High-quality enamelling ensures compliance with hygiene requirements.

    By TiSUN GmbH based in Söll, AUSTRIA. from Solar Tanks Product line

  • Model CL - Vertical Hot Water Tanks

    Calpak CL hot water tanks can be combined with 1 or 2 heat exchangers, and their volume varies from 150 to 1000L.

    By Calpak-Cicero Hellas SA based in Athens, GREECE. from Vertical Hot Water Tanks Product line

  • Model SBB - Domestic Hot Water Tanks

    All Stiebel Eltron SBB/SB-E series tanks are made in our factories in Germany and Slovakia. They can be used in residential or commercial installations as indirectly-fired domestic hot water storage tanks in conjunction with any type of boiler, geothermal, or solar hot water application.

    By Stiebel Eltron, Inc. based in West Hatfield, MASSACHUSETTS (USA). from Renewables Product line

  • Model BS Series - Single Coil Domestic Hot Water Tanks

    Provides hot water efficiently and stores heated water for a long period. Suitable solution for hygienic domestic hot water production. Heat loss is very low due to high density HCFC-free polyurethane insulation.

    By Bural Solar Ltd based in Melikgazi, TURKEY. from Domestic Hot Water Tanks Product line

  • InSinkErator - Model HWT-HP - High Performance Hot Water Tank & Filtration System

    The High Performance Hot Water Tank is chosen by professional coffee shops for proven performance. Features 2/3-gallon stainless steel tank with 1300W heating element for rapid recovery and electronic thermostat for tight temperature control. Designed for more discriminating consumers who want the best in instant hot water technology.

    By InSinkErator based in Sturtevant, WISCONSIN (USA). from Household Products- Filtration Systems Product line

  • Sigma - Hot Water Storage Tanks

    Sigma hot water storage tanks, produced according to European Standards, combined with collectors can be used both in private houses or hotels, hospitals etc, for hot water household requirements or for central heating system support.

    By Sigma Energy based in Volos, GREECE. from Solar Thermal Product line

  • Hanson Tank - Hot Water Storage Tanks

    Hotels, apartment buildings, hospitals and other facilities that need constant supplies of hot water usually have a storage tank that has been sized to meet peak demands, even though the usage at these times exceeds the output of the heater. This is achieved by selecting a tank of sufficient size, with adequate insulation, and designed to prevent ...

  • RIPOSOL - Model WWKS 300 | 06/1000 - Hot Water Compact Storage Tank

    Stationary hot water solar-storage tank made of steel sheet in accord with DIN 4753, welded-in smooth-bore heat exchanger on bottom and top. Generously dimensioned heat exchanger and a slim design ensure an optimal layering of the warm water. Corrosion-protected through enameling of storage and heat exchanger as well as additionally implemented ...

    By RIPOSOL GmbH based in Althofen, AUSTRIA.

  • RIPOSOL - Model WWKS 500 | 06/1000 - Hot Water Compact Storage Tank

    Stationary hot water solar-storage tank made of steel sheet in accord with DIN 4753, welded-in smooth-bore heat exchanger on bottom and top. Generously dimensioned heat exchanger and a slim design ensure an optimal layering of the warm water. Corrosion-protected through enameling of storage and heat exchanger as well as additionally implemented ...

    By RIPOSOL GmbH based in Althofen, AUSTRIA.

  • Premium

    Hughes Safety - Non-Flameproof Chiller Unit

    Maintain tepid water during high ambient temperatures in non-hazardous environments. This non-flameproof chiller unit is designed to maintain a tepid water supply inside Hughes emergency tank showers during hot ambient temperatures where there is a chance of the water overheating from solar radiation and scalding the casualty. It is set at ...

  • Premium

    Hughes Safety - Flameproof Chiller Unit

    Maintain tepid water during high ambient temperatures in hazardous environments. A flameproof chiller unit to temper water stored inside emergency tank showers in hot ambient climates, as stipulated by ANSI Z 358.1-2014 and EN 15154 standards. The chiller prevents water in tank showers from becoming dangerously hot and subsequently scalding the ...

  • Premium

    Zero Power Cooling System

    Maintain tepid water in emergency tank showers without the need for power. A new addition to the Hughes range of tank cooling options is the Zero Power Cooling System*. Designed and developed in collaboration with Celantel to temper water stored inside emergency tank showers in hot ambient climates, as stipulated by ANSI Z358.1-2014 and EN15154 ...

  • Premium

    Ovivo CONESEP - Resin Separation Unit

    Resin separation is key to condensate polishing system performance. Deionization plants operate at very high flow rates, making resin extraction a difficult proposition. Ovivo's CONESEP® technology is an internal distribution system designed to handle the very large ratio that exists between a high operating flow and the necessary resin ...

    By Ovivo USA LLC based in Salt Lake City, UTAH (USA).

  • Dejong - Model 200 to 500 L - Solar Tanks

    Solar tanks are applied in sustainable solar hot water tank systems. The hot water tanks are made of high grade stainless steel and have a long lifetime. The diabolo-shaped heating coils enable an efficient heat exchange and a quick reheat time. As a result a large capacity of hot water is supplied for an optimal performance. The 100 % pickled and ...

    By Dejong Gorredijk BV based in Gorredijk, NETHERLANDS. from Standard Hot Water Tanks Product line

  • Dejong - Model 750 – 1000 L - Solar Tank

    Solar tanks are applied in sustainable solar hot water tank systems. The hot water tanks are made of high grade stainless steel and have a long lifetime. The diabolo-shaped heating coils enable an efficient heat exchange and a quick reheat time. As a result a large capacity of hot water is supplied for an optimal performance. The 100 % pickled and ...

    By Dejong Gorredijk BV based in Gorredijk, NETHERLANDS. from Standard Hot Water Tanks Product line

  • Plumbing Equipment

    From hot water tanks to faucets and fixtures to fittings and tools Canamidex offers fast and efficient distribution of plumbing supplies to contractors in the residential and commercial, building and renovation markets. Our knowledgeable and trained staff will eagerly assist you with your plumbing needs.

    By Canamidex International Corp. based in Richmond Hill, ONTARIO (CANADA). from Fluid Transfer Product line

  • Dejong - Model 200 – 1000 L - Shift Load Tanks

    Shift load tanks are applied in systems where heat exchange takes place with an external plate heat exchanger instead of a heating coil. As a result, a large volume of sanitary hot water can be heated quickly. The hot water tanks are made of high grade stainless steel and have a long lifetime. The 100% pickled and passivated hot water tanks are ...

    By Dejong Gorredijk BV based in Gorredijk, NETHERLANDS. from Standard Hot Water Tanks Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you