Only show results in Connecticut? Ok

polyethylene tank (Water Tanks) equipment

  • Polyethylene Tanks

    The vertical tanks made ​​of polyethylene suitable for the containment of toxic liquids, are suitable for prolonged exposure to UV, weather resistant and insensitive to aging. The ability of vertical polyethylene water tanks range from 60 to 5000 liters.

    By Etatron D.S. S.p.A based in Roma, ITALY. from Chemical Holding Tanks Product line

  • Hawman - Model VCT70 - Polyethylene Tank

    VCT70 polyethylene tank with 7' lid inside a VCT80CB HD polyethylene containment basin and the VCT130 polyethylene tank with 10' lid inside the VCT145CB HD polyethylene containment basin.

    By Hawman Container Services based in Barrie, ONTARIO (CANADA). from Containment Basins Product line

  • Polyethylene Tanks

    Commonly known as ‘poly’ tanks, these tanks come in many sizes and colours and are suitable for both  above and below ground use. They last a long time, are UV-resistant, cost less than metal tanks and, because of their lightweight construction, are easy to transport. They must be constructed of food grade plastics that comply ...

    By Rainmaster Technologies Pty Ltd based in Wyong, AUSTRALIA.

  • Laser - Polyethylene Tank

    Storage tanks and AdBlue filling. Produced in high density polyethylene, provided at the request of the containment basin and protection roof.'

    By F.lli Savi Di Savi Dario & C Snc based in Calendasco (Piacenza), ITALY. from Urea Storage Tanks Product line

  • Roterra - Model 1000 L - Polyethylene Tank

    The tanks are made of polyethylene material, which is suitable for storing drinking water. The thickness of the tank wall is from 6 to 12 mm. Owing to excellent statics characteristics and wall thickness, the tank is resistant to the outdoor wear and tear caused by soil pressure and diverse weather conditions, and has a very long life cycle.

    By ROTO Group based in Murska Sobota, SLOVENIA. from Underground Water Tanks Product line

  • Roterra - Model 2000 L - Polyethylene Tank

    The tanks are made of polyethylene material, which is suitable for storing drinking water. The thickness of the tank wall is from 6 to 12 mm. Owing to excellent statics characteristics and wall thickness, the tank is resistant to the outdoor wear and tear caused by soil pressure and diverse weather conditions, and has a very long life cycle.

    By ROTO Group based in Murska Sobota, SLOVENIA. from Underground Water Tanks Product line

  • Roterra - Model 500 L - Polyethylene Tank

    The tanks are made of polyethylene material, which is suitable for storing drinking water. The thickness of the tank wall is from 6 to 12 mm. Owing to excellent statics characteristics and wall thickness, the tank is resistant to the outdoor wear and tear caused by soil pressure and diverse weather conditions, and has a very long life cycle.

    By ROTO Group based in Murska Sobota, SLOVENIA. from Underground Water Tanks Product line

  • Polyethylene Tank

    Polyethylene tank manufacturing (high density polyethylene) HDPE  polyethylene tank manufacturing solutions; Our tank manufacturing HDPE (high density polyethylene) to produce long-lasting sustainable solutions. We make custom sizes and size of the polyethylene sheet completely manufacture tanks with a design of your process and your usage.

    By Barat Industrial Plastic Engineering Co. based in Kartepe, TURKEY. from Tank Productions Product line

  • Polyethylene Tank for Diesel

    Polyethylene transportable tank for diesel fuel in total exemption from 1.1.3.1c ADR regulation. The advantage of the linear polyethylene is the compactness and its strength and lightness.

    By Righetto Serbatoi S.r.l. based in Altavilla Vicentina (VI), ITALY. from Transportable Tanks Product line

  • Model PE-5 - Polyethylene Tank Biofilters

    The PE-5 Polyethylene Tank from Waterloo Biofilter is a lightweight and modular onsite wastewater treatment unit. These above-ground units come pre-assembled and ready to hook up with minimal onsite labour. PE-5’s are housed in a new or existing maintenance building for year-round use, or can be housed outside in a protected area for ...

    By Waterloo Biofilter Systems Inc. based in Rockwood, ONTARIO (CANADA). from Commercial Products Product line

  • Assmann - Modular Polyethylene Tank Stand

    Assmann Corporation of America offers an FDO (Full Drain Outlet) outlet assembly. This outlet provides the ability to fully drain your tank without the need for mechanically installed nozzles. The full drain assembly should be utilized where heavy solids or salts can accumulate in the bottom of the tank thus creating difficult maintenance work. ...

    By Assmann Corporation of America based in Garrett, INDIANA (USA).

  • Hawman - Model P Series - Polyethylene Tank - 1184 Litre

    P Series - 3/8” Thick Polyethylene Bottle, Rigid Steel Frame, For Corrosives, Lubricating Oils, Edible Oils & Ingredients, Aqueous Solutions, Water Treatment Chemicals, UN31HA1 Transportable IBC, IMDG IBC, Tapered Total Drain Bottom.

    By Hawman Container Services based in Barrie, ONTARIO (CANADA). from Polyethylene Tanks Product line

  • Polyethylene Tanks for UREA with Dispenser

    In compliance with new eu legislation, many new commercial vehicles run with a selective catalytic reduction system or scr. This system substantially reduces nitrogen oxide (nox) emissions by converting it into harmless nitrogen and water through the use of a special catalytic converter and a non-explosive, nontoxic, non-flammable, water-based ...

    By Dado Tank srl based in Modena (MO), ITALY. from Urea – AdBlue Product line

  • Vertical and Upright Polyethylene Tanks

    Sierra Sales delivering two 3500 gallon HDLPE double wall safe tanks to a Remediation project for the Dept of Energy where we shipped another project's large XLPE single wall flat bottom bulk storage tank, saving both projects transport costs. While fuel continues to soar, you can bet we will coordinate 'best in class' shipping to you or the job ...

    By Sierra Sales Double Wall Plastic Tanks based in Perkasie, PENNSYLVANIA (USA).

  • Model Dualtainer - 165 Gallon Polyethylene Tanks

    Two (2) 165 Gallon Tanks side by side in one pallet frame for delivery of chemicals, oils, lubricants, DEF or any combination of liquids in one returnable, reusable IBC package!               

    By Snyder Industries Inc. based in Lincoln, NEBRASKA (USA). from Intermediate Bulk Containers (IBCs) Product line

  • Politank - High Density Polyethylene Tanks

    The high density polyethylene tanks are designed and manufactured to store foodstuffs, drinking water and to collect rain water or waste water. For outdoor, horizontal or vertical. Underground model Bunker or Lombrico

    By Dado Tank srl based in Modena (MO), ITALY. from Ecologic Line Product line

  • Carrytank - Model 440 - Polyethylene Tank for Diesel Fuel Transport

    Polyethylene tank for Diesel fuel transport in exemption from ADR -  paragraph 1.1.3.1.C. Compact and light, manufactured in roto-molded linear polyethylene, Carrytank 440 is equipped with the following fittings: filling plug, air vent device, fuel transfer unit, integrated forklift pockets (full tank), handles for lifting and carrying (empty ...

    By Emiliana Serbatoi S.r.l. based in Campogalliano (Modena), ITALY. from Transport Tanks Product line

  • Carrytank - Model 330 - Polyethylene Tank for Diesel Fuel and Gasoline Transport

    Polyethylene tank for Diesel fuel and gasoline transport, in exemption from ADR according to paragraph 1.1.3.1.C. Carrytank® 330 is a tank made in linear polyethylene designed for Diesel fuel transport; it is equipped with the following fittings: reinforced lockable lid, filling aluminium plug with integrated air vent device, level indicator, ...

    By Emiliana Serbatoi S.r.l. based in Campogalliano (Modena), ITALY. from Transport Tanks Product line

  • QUIOIL - Waste Vegetable and Mineral Oil Polyethylene Tanks

    Container designed for collection and storage of waste oils, manufactured in compliance with the applicable regulations. Made of roto-moulded high-density polyethylene, they provide high mechanic, thermal, chemical,  UV rays and adverse weather conditions resistance. Polyethylene bunded waste oil tanks are the complete solution to clients' ...

    By Emiliana Serbatoi S.r.l. based in Campogalliano (Modena), ITALY. from Ecologic Line Product line

  • Polidas - Model T 100 - Polyethylene Salt Tanks

    All Polidaş polyethylene tanks are trustable and high quality. Imported raw materials include UV also produced by using latest rotation technology and linear polyethylene blow molding machines.

    By POLIDAS Ltd based in Kemalpaşa, TURKEY. from Chemistry Industry Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you