produced water treatment system Articles

  • Produced water treatment technologies

    Abstract Produced water is a complex mixture of organic and inorganic compounds and the largest volume of byproduct generated during oil and gas recovery operations. The potential of oilfield produced water to be a source of fresh water for water-stressed oil-producing countries and the increasing environmental concerns in addition to stringent legislations on produced water discharge into ...

  • BP Petrojarl Foinhaven - produced water treatment

    Client: BP/PGS Petrojarl Foinaven - UK CETCO were approached by BP/PGS regarding potential fluids handling problems on the Petrojarl Foinaven FPSO when bringing on two new wells during September 2001. CETCO mobilised a RFV 4000 DF Adsorption Skid containing CETCO’s patented CrudeSorb® media to treat the oily water phase of the well returns for discharge directly overboard. During a two week ...


    By CETCO Energy Services

  • Talisman - produced water treatment to <30 ppm

    Client: Talisman Buchan Alpha - UK Following successful trial work, CETCO supplied a single 48” CrudeSep® vessel skid to treat produced water for discharge overboard. Talisman then purchased a second 48” CrudeSep vessel skid to further reduce its overboard oil in water discharges in line with regulations. CETCO’s CrudeSep system treated approximately 12,000 bbls/d of produced water on the Buchan ...


    By CETCO Energy Services

  • Water treatment in a pinch - installing a temporary produced water polishing system

    An oil company experienced produced water treatment system upsets and CETCO Oilfield Services was chosen to deliver and operate a temporary treatment system until problems with the permanent installation could be resolved. CETCO Oilfield Services personnel and equipment arrived on the platform, set up their reliable produced water polishing system, and began operations. CETCO personnel were on ...


    By CETCO Energy Services

  • Advanced Water Treatment and Evaporation Systems Produce High Efficiency

    AQUATECH IS CHANGING THE GAME in the water recycling industry through its SmartMOD Modular Evaporator System and HEVAP High Efficiency Evaporation Process for SAGD Water Treatment. For over 30 years, the company has focused exclusively on desalination, water reuse, and zero liquid discharge with water purification technologies suited for global industrial, upstream and ...

  • Produced water treatment from a to Zinc - reducing levels of Zinc in a produced water stream

    Problem At vast depths, the ocean floor consists of layers of decaying plant and animal matter, containing chemicals like sulphate and zinc, which has built up over the years. When operators are drilling, the matter is disturbed and the various chemicals are released into the water. Since the mid 1980’s the pace of exploration, production, and development in the deep waters of the Gulf of Mexico ...


    By CETCO Energy Services

  • MPPE for Vermilion (Total) Harlingen Gas Produced Water treatment case study

    MPPE for removal of: Dispersed oil (aliphatics) Dissolved and dispersed aromatics (BTEX, PAHs) Since June 1994 Produced water from offshore gas Condensed water from glycol regeneration unit Dissolved and dispersed aromatics (BTEX): 1,500 – 2,500 ppm → < 0.5 ppm Dispersed oil (dispersed ...

  • Oil Field Water Treatment

    The IE Oil Field Treatment System (OFTS) offers a portable, yet high-quality, answer for oil well operators seeking to treat produce water from their drilling operations. The OFTS utilizes the extraordinary separation and dewatering characteristics of the FloccinAgent™ line of products, coupled with IE’s technical expertise and experience in wastewater treatment, to quickly and efficiently remove ...


    By Integrated Engineers Inc.

  • Decision support system for risk management of produced water in offshore oil and gas industries

    A decision support system for produced water management (DISSPROWM) in offshore operations is presented. The system determines the risk and hazards to human and marine species from non-carcinogenic and carcinogenic pollutants present in produced water including radionuclides. The DISSPROWM also evaluates best available treatment technology for treating the produced water whose properties are in ...


    By Inderscience Publishers

  • Water treatment in Brazil

    The challenge Many factories in Brazil do not dispose their sewerage in a professional way. Only big enterprises use facilities to treat their industrial waste water, whereas numerous small and medium-sized enterprises convey their sewerage flow into rivers and brooks or pit drainages. This results in a significant environmental burden and endangers the health of the population. ...


    By EnviroChemie GmbH

  • Arsenic waste from water treatment systems: characteristics, treatments and its disposal

    As with other water treatment systems, arsenic treatment creates not only quality water but arsenic waste as well. Management of arsenic waste is now becoming a major public concern due to its harmful effects on the surrounding environment, including serious health problems such as skin cancers and various internal carcinomas. The main aim of this paper is to review: (i) the characteristics of ...


    By IWA Publishing

  • Nimr Water Treatment Plant Oman

    Introduction The Nimr water treatment plant (NWTP) project is located in the south of Muscat in Oman. The temperatures in the region can be as high as 60°C in the summer months, making it a harsh environment to work in. This water treatment project was co-executed by Bauer Environment and Petroleum Development Oman (PDO). The plant came online in late 2010 and has been treating ...


    By BAUER Resources GmbH

  • RM-10 + water treatment = $avings

    CETCO Oilfield Services RM-10 flocculant is being utilized at a plating company to remove chrome and cadmium from wastewater, significantly reducing the company’s use of energy during its wastewater treatment process. The plating plant produces between 400 and 800 gallons of wastewater per week. It utilizes two rinse baths, one with chrome and one with cadmium. Prior to the application of ...


    By CETCO Energy Services

  • Waste Water Treatment Processes Explained

    SUNCOAST WASTE WATER MANAGEMENT  presents  AEROBIC -verses- ANAEROBIC THE AEROBIC PROCESS There are two basic types of sewerage treatment processes, which are the Aerobic process and the Anaerobic process. Aerobic means with air or oxygen and Anaerobic (septic) means without air or oxygen. Aerobic bacteria are a higher life form and when digesting waste are utilising dissolved oxygen or air in ...

  • Water Treatment Equipment Markets in China

    China’s demand for Water Treatment Equipment has grown at a fast pace in the past decade. In the next decade, both production and demand will continue to grow. The Chinese economy maintains a high speed growth which has been stimulated by the consecutive increases of industrial output, import & export, consumer consumption and capital investment for over two decades. This new study ...

  • Filter backwash water treatment options

    Filtration acts as the final step in the removal of suspended matter and protozoa. The accumulated residue is removed during the backwash process and any subsequent recycling of filter backwash water could potentially re-introduce these contaminants into the main treatment process. By separating the filter backwash water from the main treatment process, factors that could interfere with the ...


    By IWA Publishing

  • StatoilHydro Kollsnes Norway, MPPE for removing toxic load of gas produced water case study

    MPPE for Removal of: Dispersed oil (aliphatics) Dissolved and dispersed aromatics (BTEX) Poly Aromatics (PAHs) Specifications: Flowrate 20 m3/hr Includes Steam Generator and RO unit >99% removal of BTEX, PAHs, Aliphatics (oil) Kollsness project ...

  • A Quick Solution: Modular Waste Water Treatment

    Rust corrodes materials and may lead to impurities. As a result, there is a demand across most sectors for components that are protected against corrosion. Cantin SA, headquartered in Domdidier in Switzerland, specializes in the metalworking of rust-proof materials. The company produces complete products and individual components for many different sectors, from medical technology through the ...


    By EnviroChemie GmbH

  • Cooling Water Treatment in a Thermal Power Station

    Ozonia Switzerland and a water treatment company have successfullyinstalled and commissioned a turnkey, fully assembled, containerised ozone system in a large Thermal Power Station. The ozone produced by the plant will be used to treat the raw make-up water being fed to the cooling towers and to compliment the proprietary biocide dosing program being used in the cooling system at the ...

  • Water Treatment in Microbrewery application - Case Study

    Point-of-Entry (POE) Water Treatment Used for Chlorine Removal in Microbrewery Application Summary: RO is the preferred technology for many commercial/light industrial applications where feed water purification and final product water consistency are essential. Growth of U.S. microbreweries has created an opportunity for this application. The following case study offers an additional area of ...


    By KDF Fluid Treatment, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you