Water Treatment Companies in Poland

In Poland | Serving PolandNear Poland
42 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Water Treatment ×

  • In: Europe ×

  • In: Poland ×

MICRODYN-NADIR GmbH

Distributor in Nowy, POLAND

MICRODYN-NADIR is the technology leading membrane and module supplier for the micro-, ultra- and nano filtration worldwide.The membrane division of the former Hoechst AG which used to be known as NADIR Filtration was founded in 1966. In 2003, NADIR Filtration and MICRODYN Modulbau, whose roots go back to the AKZO AG, merged and have been an important player in the ...

Nikuni

Distributor in POLAND

We have been leading the Japanese Small Precision Centrifugal Pump industry for over 50 years. Our pumps are used in difficult applications in Industrial, Chemical, and Water Treatment plants, as well as in boiler feed, naval, and other industrial duties.

Air Products PLC

Office in Warszawa, POLAND

We supply industrial gases, performance materials, equipment and technology. We are the world’s largest supplier of hydrogen and helium and have built leading global supply positions in growth markets such as semiconductor materials, refinery hydrogen, coal gasification, natural gas liquefaction, and advanced coatings and adhesives.

Tholander Environmental Engineering

Office in Jasienica, POLAND

As an ISO 9001:2008 certified company and a leading manufacturer of air pollution control plants we offer turn-key solutions for almost any waste air problem.More than 1,000 references from a wide range of applications around the globe are testimony to the trust our satisfied customers have in us. Every hour, we clean more than 5 million m³ of waste air worldwilde. Our ...

Dewaco Ltd

Distributor in WARSAW, POLAND

Dewaco Ltd offers solutions to the world`s most complex wastewater treatment problems. The company can help wastewater plants reduce environmental impacts and substantially improve efficiency in producing bioenergy from waste. This has considerable market potential as globally there are tens of thousands of wastewater plants.

JPR SYSTEM

based in Żyrardów, POLAND

JPR SYSTEM was established as an importer and sole distributor of domestic wastewater treatment plants for the Polish market. A few years later our range was extended by hydrocarbon and fat separators, as well as storage tanks.

AGIMIX Poland Sp. z o.o.

based in Rzeszów, POLAND

AGIMIX offers top and side entering agitators which find application in municipal and industrial wastewater treatment processes, as well as in processes of the food, paper and pulp, chemical and pharmaceutical industries.

SEEN Technologie sp. z o.o.

based in Warszawa, POLAND

Environmental Engineering at Warsaw University of Technology. He has worked for many design and contracting companies, implementing the construction of wastewater treatment plants and water treatment plants. He possesses professional building and design licences.

Separator Sp. z o.o.

based in Gdynia, POLAND

SEPARATOR as continuator of AVM, since 1993 deals with transport, thickening and dewatering of municipal and industrial sludges, biogas purification and utilisation and instruments for on-line measurement and monitoring of process parameters. Our installations are based on equipment manufactured by well-known and highly valued Swedish, German and Dutch manufacturers. ...

MT Recykling

based in Stanisławów, POLAND

Recycling MT Sp. Ltd. offers a wide range of waste recycling equipment: municipal, industrial, post-production, plastics, wood, biomass, etc. The facilities offered by MT Recycling Sp. Ltd. come from EU countries are equipped with all necessary signs and certificates, and designed to work individually or in a line.

REDOR sp. z o.o.

based in Bielsko-Biała, POLAND

The history of REDOR Sp. z o.o. dates back to 1967 when the company Bielski Zakład Urządzeń Technicznych was established. Gear Research and Development Centre and then Gear-motors and Reducer Research and Development Center “Redor” in Bielsko-Biała were the next stages of Company’s existence. Its basic tasks included comprehensive works on gear drives ...

ZRE Gdansk S.A.

based in Gdansk, POLAND

ZRE Gdansk S.A. is a joint - stock company, established in 1933. The company provides services for power engineering and industry in production of equipment protecting power transmission network, in industrial diagnostics and in technical consultancy. The company pays special attention to problems of ecology and environmental protection offering well-tried solutions ...

NIVUS GmbH

Office in Gdynia, POLAND

The NIVUS group is one of the foremost developers, producers and suppliers of measurement equipment for water economy worldwide. The product range contains units for measuring flow, level, pressure, water quality, density and turbidity as well as units required for data acquisition, data transfer, data logging and data evaluation. A comprehensive process control system ...

Grundfos

Office in POLAND

Grundfos is the world`s largest manufacturer of pumps and pump solutions.

SILHORKO-EUROWATER A/S

Office in Izabelin, POLAND

Silhorko-Eurowater, a group of co-operating European water treatment specialists. EUROWATER was founded in 1936 in Denmark. The first customers were co-operative dairies but soon the customer base also included small waterworks and farms in the region of Jutland. The main product was manual filtration plants for removal of iron and manganese. Today EUROWATER offers local ...

AGRU Kunststofftechnik GmbH

Office in Goleniów, POLAND

AGRU Kunststofftechnik GmbH is a major, international manufacturer of innovative plastic products such as piping systems, semi-finished products, concrete protective liners and geomembranes. The Austrian family business with some 800 staff worldwide is managed by Director Mag. Alois Gruber. The head office and 4 production facilities are located in Bad Hall, Upper ...

IST-Anlagenbau GmbH

Distributor in ul. Kolista 107A/20, POLAND

Solar sludge drying. The Wendewolf moves and aerates up to 250 m³/h of sludge! The automatic programme ensures a continuous flow of the freshly pressed sludge through the drying bed. The required energy consists of electricity only, between 10 kWh to 30 kWh per ton of water evaporated. Industrial dryers require between 800 and 1000 kWh in thermal energy and electricity. ...

ENVIMAC Engineering GmbH

Office in Ostrów Wielkopolski, POLAND

For more than 25 years ENVIMAC is specializing in the design, production and maintenance of components and turnkey plants for Process industry and environmental protection. State-of-the-art engineering technology, combined with our experience in plant and apparatus design and manufacture as well as the production of components, enables us to provide sophisticated, ...

RUNI A/S

Distributor in Warszawa, POLAND

RUNI has specialised in the most efficient and energy-saving type of compactors – screw compactors. We were the first on the market and as leading pioneers in waste compactors, we have built up extensive knowledge and experience, and through continuous development we have converted this into the toughest, most versatile, and most efficient EPS compactors on the market. ...

LEMTECH Konsulting

based in Krakow, POLAND

We provide technical assistance to local governments, unions of municipalities, municipal utilities and service companies as well as large and small & medium size businesses covering such areas as water and waste water management, solid waste management, strategic planning and financial management, project development and project management. We have been implementing ...

Need help finding the right suppliers?

Let the XPRTs do the work for you