Screw Compactor (Water Treatment) Equipment
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Compact equipment that performs several functions in the process of eliminating solids from urban and industrial wastewater treatment plants, minimising their moisture content and volume. Special application in the treatment of solids from screening and roughing processes, helping to achieve greater dryness in the output waste. ...
-
Manufactured by ML Spiralsbased in CANADA
An excellent complement to the screw conveyor. It dewaters and compresses the screening effectively. Depending on the material, volume can be reduced up to 75%. Many installations at municipal water and wastewater treatment plants and industry which are in operation confirm its reliability. A screw conveyor with a dewatering unit in ...
-
Manufactured by IngenierÃa De Medios del Pirineo S.L. (IDM)based in SPAIN
The DET53C COMPACTOR SCREW is a specially designed unit to transport and compact solid waste blocked by the Automatic Screens, Filtering Sieves, Rotating Sieves, ...
-
Manufactured by Nuove Energie s.r.l.based in ITALY
The CPS Screw Compactor without shaft is the compactor that can halve the screened material. The machine can be inclined up to 30° and is composed of a drainage section, a “U” trough and a compaction module. The drainage section is usually located underneath, or right before the feeding hopper and the material is conveyed ...
-
Manufactured by CST Wastewater Solutionsbased in AUSTRALIA
The Screw Compactor, has combined into one unit a system for mechanical transportation, de-watering and compressing. In this way the screening volume is greatly reduced. The structural and functional simplicity of the compactor design in the form of shaftless flighting, allows for the absence of internal supports and minimum ...
-
Manufactured by Danish Wastewater Equipment A/S (DWE)based in DENMARK
Shaftless Screw Compactor model KD 03 are available in four sizes with capacities fra 1 to 8 cubic metres per hour. The Conveyors are particularly suitable for screen solids where separations of water and dry material is required. The Shaftless Screw Compactor are made of dip-pickled stainless steel, thus ensuring maximum ...
-
Manufactured by Eau Clairebased in FRANCE
The Screw press compactor TYPE EC 10.06 CP compress and convey screenings and sludge directly to a dumpster (with or without a bag filler). Screennings are conveyed through a pipe (DN 200 or DN 250, Length 1 to 10 m, Height 0 to 4 ...
-
Manufactured by Eau Clairebased in FRANCE
The screw conveyor / compactor type EC 10.06 C & CC is designed to convey automatically screenings to a specific container with or without a bag filler ...
-
PremiumManufactured by Devise Engineering S.A.based in GREECE
The DEVISE MBF is a mechanical micro-solids separator based on the ‘continuous band/tape- filtration’ principle that is used to remove solids from all kinds wastewater. This machine can remove organic and inorganic matter, such as food waste, tissue- paper, inert material, fat, grease, animal slaughter remains, fish-remains and other biodegradable suspended solids from a wide range of ...
-
Manufactured by Runi A/Sbased in DENMARK
Empty Full LDPE Drums Continuously: Large 19-litre water containers, paint buckets and plastic containers are impractical to separate from its content, transport and dispose of because of the enormous amount of empty ...
-
Manufactured by Runi A/Sbased in DENMARK
Dewater Rejects from Plastic Washing. All plants for plastic recycling, that washes their plastic before the real processing, have big amounts of reject from the washing plant. The reject is mostly very wet material consisting of paper, plastic, sand, textile etc. Unfortunately the reject cannot be used and therefore the recycling industry often has large cost for disposal of this wet ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
The Girapac is an enclosed, compact, and stand-alone unit, mainly for full pre-treatment of wastewater entering municipal and industrial WWTPs. This type of rotating drum screen has three main functions: solid/liquid separation, compacting, and bagging of waste. ANDRITZ rotating drums – Girapac and Girasieve - are enclosed, compact, and stand-alone units, mainly for full pre-treatment of ...
-
Manufactured by Eau Clairebased in FRANCE
The inclined cylindrical screen with or without a built-in screw compactor type EC 10.10 TE & TEC is designed for fine screening and small wastewater treatment. Installation is made in a channel with a 35° inclination maximum. This all in one system collects, dewaters and compresses the screenings. Therefore all manual ...
-
Manufactured by Eau Clairebased in FRANCE
The inclined cylindrical screen with or without a built-in screw compactor type EC 10.10 CTE & CTEC is designed for fine screening and small wastewater treatment. The installation in a built-in stainless steel tank is specifically efficient for septage treatment. This all in one system collects, dewaters and compresses the ...
-
Manufactured by Claro Incbased in CANADA
Claro is pleased to offer septage receiving stations with optional integrated wash press screw compactor, hygienic bagger, and metering/billing systems configured to suit application requirements. Based on proven X-Screen fine screening technology, this septic sludge receiving unit delivers exceptional screening capabilities, long-term ...
-
Manufactured by Envotech Ltd.based in BULGARIA
The screw screen (with or without compactor) is a machine consisting of: Screen made of a punched or wedge-wire metal screen area with mesh sizes from 0.25 mm to 10 mm. Throughput capacity up to 1100 m³/h. Screen width (version for concrete channel installation) ranging from 200 mm to 800 mm. Conveyor to lift the captured solids ...
-
Manufactured by DRYCAKE - TWISTER DEPACKAGERbased in CANADA
DRD Rotary Drum Screw-Screens are integrated machines consisting of a screen, a screw conveyor and compactor. During operation, solids within the incoming flow will enter into the drum screen and progressively collect onto the screen mesh and cause it to gradually blind. The upstream water level will rise and at a predetermined level, the ...
-
Manufactured by Schreiber LLCbased in USA
The Schreiber Washer/Compactor delivers superior screening results with easy operation and a minimum of maintenance. Choose from our flexible inlet and discharge configurations. For headworks that encounter unusually high numbers of rocks and other large sediments, the Schreiber Washer/Compactor offers options for rock removal, as well as ...
-
Manufactured by Eau Clairebased in FRANCE
Application: The externally fed rotary drum sreen is designed allows a fine screening (from 500 µm to 3 mm) of raw municipal and industrial influent. This compact and enclosed equipment can be installed on tall ...
-
Manufactured by Claro Incbased in CANADA
Claro is pleased to offer the PP perforated plate fine screen designed specifically for water and wastewater screening applications that require an exceptionally accurate and high level of debris capture with no possibility for screenings carry-over. The PP unit is ideally suited for the protection of very sensitive process equipment such as membrane technologies and floating and fixed media. Its ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you