wastewater disposal Equipment available in Jamaica

Available in Jamaica| Near Jamaica
79 Results found

We couldn't find any wastewater disposal equipment in Jamaica

Here is a list of results available in Jamaica

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Water Treatment ×

  • Keyword: wastewater disposal ×

  • Available in: Latin America ×

  • Available in: Jamaica ×

SORB 33 - Arsenic Removal System

by De Nora Water Technologies     based in Colmar, PENNSYLVANIA (USA)

The SORB 33® arsenic removal system employs a simple process that flows pressurized water through a fixed bed pressure vessel containing the ferric oxide (Bayoxide® E33 granular or Bayoxide® E33P pelletized) media. As the contaminated water passes through the media, arsenic is adsorbed and removed to a level below 10mg/L. Since the ...

Bayoxide - Model E33P - Arsenic Removal Media

by De Nora Water Technologies     based in Colmar, PENNSYLVANIA (USA)

Bayoxide® E33P is a pelletized version of the granular Bayoxide E33 arsenic removal media, and offers advantages over the original granular formulation. The pelletized Bayoxide E33P media has the same high capacity for arsenic removal as the original media, which has been proven to remove arsenic to below 4 parts per billion (ppb). The pellet ...

Bayoxide - Model E33 - Arsenic Removal Media

by De Nora Water Technologies     based in Colmar, PENNSYLVANIA (USA)

The dry, crystalline granular Bayoxide® E33 media was designed with a high capacity for arsenic, providing long operating cycles and low operating costs. The media’s life expectancy is dependent on site-specific water quality and operating levels. Media is filled into the vessels from sacks by gravity or by hydraulic educting. The ...

Muncher - Cutting System for Coarse Solids

by Biogest International GmbH     based in Dresden, GERMANY

Cutting of coarse solids, which are e.g. parts of hotel waste water. As experience shows, baby diapers, hygiene binding, textiles etc. are here disposed by toilet. These materials would clog the pumps, that is why they must be cut up.

Mobile Evaporator

by General Electric     based in Fairfield, CONNECTICUT (USA)

Treat shale gas flowback and produced water at the well site. Designed to enable on site flowback and produced water recycling, GE’s completely mobilized evaporator reduces the volume of wastewater and fresh water that needs to be hauled to and from the site. This significantly decreases transportation and disposal costs while communities ...

Spiralift - Model SL - In-Channel Fine Screen

by Franklin Miller Inc.     based in Livingston, NEW JERSEY (USA)

The SPIRALIFT SL features Taskmaster grinding technology in combination with a shaftless screw screen. This system fine screens, washes and conveys solids out of a channel. The discharge is a homogenous, ground filtrate which is washed, compacted and conditioned - ideal for landfill disposal. By combining two technologies into one system, the ...

Marine Water Evaporator Systems

by SkimOil Inc.     based in Carrboro, NORTH CAROLINA (USA)

Skimoil’s® Evaporation Systems are a partial answer to the marine waste water management requirements presented by the new EPA enforcement of the Clean Water Act. Skimoil’s® Evaporation Systems evaporate away the water portion of oily bilge water, gray water and even treated black water coming off of Marine Sanitation Devices ...

Liquid/Solid - Centrifuge Centrifugal Separators

by SkimOil Inc.     based in Carrboro, NORTH CAROLINA (USA)

MaxSep is a revolutionary centrifuge designed to solve a wide variety of industrial solids from fluid removal applications. MaxSep™ is state of the art, fully automatic and industrial high-speed. Separates and removes solids to the Sub-Micron level -- without ongoing filter costs.

BioFicient - Wastewater Treatment Systems

by Smith & Loveless Inc.     based in Lenexa, KANSAS (USA)

The patented BioFicient Process presents an innovative approach for pre-engineered wastewater treatment systems: specifically, reducing biosolids wasting and handling requirements. This means no complex plant operation or RAS/WAS calculations and minimal reduced biosolids to handle, haul and dispose.

Stabilization and Solidification Agents

by CETCO Oilfield Services Company     based in Covington, LOUISIANA (USA)

CETCO Oilfield Services revolutionized the wastewater treatment market with its broad range of innovative stabilization and solidification products. These products ensure compliance with federal, state, and local disposal standards while offering a more cost-effective and safer approach than lime, fly ash, diatomaceous earth, or other traditional ...

Aerobic Wastewater Treatment

by Global Water Engineering (GWE)     based in Bangkok, THAILAND

Aerobic treatment converts the organic pollutants (COD, BOD) in wastewater into a fair amount of excess sludge, and oxidizes the rest with oxygen (air) to carbon dioxide. This causes high operating costs for sludge treatment and disposal and for aeration, so that anaerobic treatment systems are normally to be preferred. The aerobic process ...

Model EV series - Heat Pump Wastewater Evaporator

by SAITA srl     based in Limena (PD), ITALY

EV vacuum evaporators series are used for the industrial waste solution treatment, to recover the water content and reduce the amount of disposable waste. The principle of the Low temperature vacuum distillation allows to obtain an optimal separation of the water from the pollutants contained and to recover 90% of distilled water. SAITA ...

PISTA - Grit Screw Conveyor

by Smith & Loveless Inc.     based in Lenexa, KANSAS (USA)

The second-stage PISTA Grit Screw Conveyor is designed to work in concert with the complete PISTA Grit Removal System, providing superb dewatering and high retention of fine grit without the burden of high maintenance. The lamella plate design aids in the retention of fine grit while reducing turbulence and overflow. Dewatered grit discharges into ...

Vogelsang - Vacuum Disposal Systems

by Vogelsang Ltd     based in Crewe, UNITED KINGDOM

Vacuum disposal systems for wastewater and hygiene sectors are proving themselves more and more as environmentally friendly and cost-saving alternatives for use on ships, vehicles and in buildings. We have developed a compact, reliable and economical vacuum disposal technology based on our proven rotary lobe pump. Together with your general ...

Automatic Sludge Disposal Vane

by Miranda Water Treatment Systems     based in Ankara, TURKEY

Suspended solids in wastewater are removed in biological treatment modules and sludge collected at the bottom of the modules should be removed periodically. Sludge disposal vane serves to remove this sludge to prevent the odor production and accumulation of the sludge. Only one vane is used for each sludge line. Usually, the sludge removal period ...

Segflo - Recirculating Biotower

by Premier Tech Aqua     based in Rivière-du-Loup, QUEBEC (CANADA)

Preassembled to minimize required onsite work, Segflo represents an economical solution not only because it is easy to install but also because it uses less energy and is much easier to maintain. This high-performance solution is very compact and perfect for reducing high loads. Allows for a rapid commissionning without affecting treatment ...

Oily Wastewater Treatment and Recovery Membrane Systems

by Dynatec Systems Inc.     based in Burlington, NEW JERSEY (USA)

Dynatec offers membrane systems to remove free and so-called “soluble” (emulsified) oils, as well as heavy metals, from waste streams.

ALDEC - Decanter Centrifuges

by Alfa Laval     based in Sweden, SWEDEN

Smaller, low-tech ALDEC decanter centrifuges are ideal for loads of smaller wastewater treatment facilities looking for reliable, low-cost sludge dewatering.

FreshAWL - Model WOW-AIR B28™ - Biosolids and Pond Algae Control System

by FreshAWL, LLC     based in Concord, CALIFORNIA (USA)

Manufactured according to the EPA's standards for DfE, FreshAWL WOW-AIR B28 is designed for treating wastewater treatments where high concentrations of biosolids are present such as:

GTS - Model Global Recycle Systems - Wastewater Treatment System

by GLOBAL Wastewater Treatment Systems, Inc.     based in Grand Island, NEBRASKA (USA)

The Global Re-cycle System is designed to meet the needs of customers that are unable to dispose of their wastewater by discharge or that are located in an area where discharge is not permitted.

Need help finding the right suppliers?

Let the XPRTs do the work for you