Water & Wastewater Pipes Books

138 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pipes ×

Chemical-Resistant Nonmetallic Materials; Vitrified Clay Pipe; Concrete Pipe; Fiber-Reinforced Cement Products; Mortars and Grouts; Masonry; Precast Concrete

by ASTM International

Under the heading of chemical-resistant nonmetallic materials, this volume provides specifications, tests, and practices for measuring the properties of mortars, grouts, and monolithic surfacing. Also included are standards on mortar and grout for masonry construction and manufactured masonry units. Volume 04.05 also features specifications for ...;

Wastewater Hydraulics

by Springer

The second, enlarged edition of this established reference integrates many new insights into wastewater hydraulics. This work serves as a reference for researchers but also is a basis for practicing engineers. It can be used as a text book for graduate students, although it has the characteristics of a reference book. It addresses mainly the sewer ...;

Plastics

by ASTM International

This section includes Volumes 08.01 through 08.04.Volume 08.01 Plastics (I): D 256-D 3159Volume 08.02 Plastics (II): D 3222-D 5083Volume 08.03 Plastics (III): D 5117--latestVolume 08.04 Plastic Pipe and Building ProductsPrices for print and CD-ROM reflect the ASTM discount for pu;

Plastics

by ASTM International

This section includes Volumes 08.01 through 08.04.Volume 08.01 Plastics (I): D 256-D 3159Volume 08.02 Plastics (II): D 3222-D 5083Volume 08.03 Plastics (III): D 5117--latestVolume 08.04 Plastic Pipe and Building ProductsPrices for print and CD-ROM reflect the ASTM discount for pu;

Plastics

by ASTM International

This section includes Volumes 08.01 through 08.04.Volume 08.01 Plastics (I): D256-D3159Volume 08.02 Plastics (II): D3222-D5083Volume 08.03 Plastics (III):D5117-latest; Reinforced Plastic Piping Systems and Chemical Equipment; Plastic Building ProductsVolume 08.04 Plastic Piping Systems;

Steel--Piping, Tubing, Fittings

by ASTM International

Volume 01.01 features standards for various types of steel pipe that specify requirements for high-temperature service, ordinary use, and special applications, such as fire protection.It includes specifications on steel tubes for boiler and superheater tubes, general service tubes, still tubes in refinery service, heat exchanger and condenser ...;

Steel--Piping, Tubing, Fittings

by ASTM International

Volume 01.01 features standards for various types of steel pipe that specify requirements for high-temperature service, ordinary use, and special applications, such as fire protection.It includes specifications on steel tubes for boiler and superheater tubes, general service tubes, still tubes in refinery service, heat exchanger and condenser ...;

Standards Official Notice - Effective June 2016

by American Water Works Association (AWWA)

ANSI/AWWA C909-16 Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4 In. (100 mm) and Larger (November 19, 2015)ANSI/AWWA D106-16 Sacrificial Anode Cathodic Protection Systems for the Interior Submerged Surfaces of Steel Water Storage Tanks (October 30, 2015);

Steel--Piping, Tubing, Fittings

by ASTM International

Volume 01.01 features standards for various types of steel pipe that specify requirements for high-temperature service, ordinary use, and special applications, such as fire protection.It includes specifications on steel tubes for boiler and superheater tubes, general service tubes, still tubes in refinery service, heat exchanger and condenser ...;

Plastic Pipe and Building Products

by ASTM International

Half of the standards in this volume are specifications that establish standard property requirements for plastic pipe, tubing, and fittings, including ABS, CPVC, PB, PVC, polyethylene, reinforced thermosetting, and styrene-rubber. Also includes standards for joints, seals, solvent cement, installation procedures, and PVC windows. ;

Ferrous Castings; Ferroalloys

by ASTM International

Volume 01.02 includes standards that describe the property requirements of steel castings used for general applications, structural purposes, and high-temperature and low-temperature service. It also features alloy-casting specifications for castings made of nickel and chromium alloys.Other standards detail the property and testing requirements ...;

Concrete and Aggregates

by ASTM International

This volume includes test methods, specifications, and practices on concrete and concrete aggregates, curing materials, grout, and expansion joint fillers. These standards address abrasion testing, fluid penetration, chemical admixtures and reactions, concrete for radiation shielding, evaluation of data and laboratories, NDT, in-place testing, ...;

Concrete and Aggregates

by ASTM International

This volume includes test methods, specifications, and practices on concrete and concrete aggregates, curing materials, grout, and expansion joint fillers. These standards address abrasion testing, fluid penetration, chemical admixtures and reactions, concrete for radiation shielding, evaluation of data and laboratories, NDT, in-place testing, ...;

Concrete and Aggregates

by ASTM International

This volume includes test methods, specifications, and practices on concrete and concrete aggregates, curing materials, grout, and expansion joint fillers. These standards address abrasion testing, fluid penetration, chemical admixtures and reactions, concrete for radiation shielding, evaluation of data and laboratories, NDT, in-place testing, ...;

Quality Assurance of Polymeric Materials and Products

by ASTM International

Examines the development of working system for quality assurance and describes typical methods used to monitor the production of plastic materials and products. Also includes a section on applying quality assurance techniques to the production of plastic pipes.;

Plastic Pipe and Building Products

by ASTM International

Half of the standards in this volume are specifications that establish standard property requirements for plastic pipe, tubing, and fittings, including ABS, CPVC, PB, PVC, polyethylene, reinforced thermosetting, and styrene-rubber. Also included are specifications for joints and seals and solvent cement. It also includes practices that define ...;

Wastewater Collection Systems Management - MOP 7, 6th Edition

by Water Environment Federation (WEF)

The new edition provides up-to-date guidance on the oversight of wastewater collection systems, including gravity sewers, pumping stations, force mains, and other sewer conveyance-related facilities. This authoritative volume offers strategies for developing a comprehensive asset-management program that encompasses capacity, management, ...;

Plastic Pipe and Building Products

by ASTM International

Half of the standards in this volume are specifications that establish standard property requirements for plastic pipe, tubing, and fittings, including ABS, CPVC, PB, PVC, polyethylene, reinforced thermosetting, and styrene-rubber. Also included are specifications for joints and seals and solvent cement. It also includes practices that define ...;

Steel--Piping, Tubing, Fittings

by ASTM International

This edition features standards for various types of steel pipe, which specify requirements for high-temperature service, ordinary use, and special applications such as fire protection. Specifications for steel tubes list standard requirements for boiler and superheater tubes, general service tubes, still tubes in refinery service, heat exchanger ...;

Ships and Marine Technology

by ASTM International

Appearing in this volume are specifications, practices, and guides used in the marine industry. They include standard requirements for: steel furniture, watertight doors, marine coatings inspections and applications, electrical insulation monitors, computer applications, electronic databases, piping systems, transducers, and valves. ;

Need help finding the right suppliers?

Let the XPRTs do the work for you