pipe coupling Equipment available in Latvia

Available in Latvia| Near Latvia
199 Results found

We couldn't find any pipe coupling equipment in Latvia

Here is a list of results available in Latvia

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pipes ×

  • Keyword: pipe coupling ×

  • Available in: Europe ×

  • Available in: Latvia ×

Model WE-ER - Pipe Coupling

by Dipl.-Ing. K. Weinhold GmbH & Co. KG     based in Neuss, GERMANY

The WE-ER pipe coupling form A consists of 2 coupling parts plus clamp and sealing ring. Depending on execution, pipe coupling parts are either welded onto the pipes (or metal hoses) or screwed on, then fitted into one another for coupling and connected by laying the clamp around.

Model TYPE 2A - Pipe Coupling

by Mücher Dichtungen® GmbH & Co.KG     based in Ennepetal, GERMANY

Mücher Canada Plus, Type 2A Couplings are primarily designed for joining clay pipes in sewerage, drainage and other non-pressure applications. Whereas the Canada Plus, Type 2B Couplings are conform to WIS 4-41-01, Z-42.5-373 and Avis Technique 17/05-165*V1, the Canada Plus, Type 2A is only conform to the European standards DIN EN 295-4 and ...

Axilock - Model S - Pipe Coupling

by Teekay Couplings Limited     based in Old Beaconsfield, UNITED KINGDOM

The Teekay Axilock range is designed to replace the need for flanging, welding, pipe grooving and pipe threading by providing a quick and easy solution to joining plain-end pipe. Incorporating grip rings at each end of the fitting, the Teekay Axilock offers high levels of security by locking the pipes together under pressure. Each coupling is 100% ...

Model WE-ER - Pipe Coupling for Large Nominal Widths

by Dipl.-Ing. K. Weinhold GmbH & Co. KG     based in Neuss, GERMANY

The WE-ER pipe coupling for large nominal widths is a further development of WE-ER® pipe coupling. It serves to connect pipes and hoses of nominal diameters from DN 200 and up to 120 bar. Possible application fields are to be found e.g. in steel mills, chemical plants, plant engineering companies and lignite surface mining.

WE-ER Pipe Coupling

by Dipl.-Ing. K. Weinhold GmbH & Co. KG     based in Neuss, GERMANY

The WE-ER® pipe coupling form A consists of 2 coupling parts plus clamp and sealing ring. Depending on execution, pipe coupling parts are either welded onto the pipes (or metal hoses) or screwed on, then fitted into one another for coupling and connected by laying the clamp around.

Mechanical Pipe Couplings

by Philmac Pty Ltd     based in North Plympton, AUSTRALIA

Philmac’s range of mechanical couplings provides innovative solutions for connecting pipes of any material with various pressure requirements. Philmac can also offer pipe couplings to suit any rigid-wall pipe up to 5000mm in diameter.

MaxiFit - Universal Pipe Couplings

by Viking Johnson     based in Hitchin, UNITED KINGDOM

MaxiFit universal pipe couplings are designed to accommodate plain ended pipes with different outside diameters. One fitting is able to connect a wide variety of pipe materials including steel, ductile iron, PVC, cast iron, GRP and asbestos cement pipes amongst others. The range is designed and manufactured under quality management systems to BS ...

Model Style B - Medium-Pressure Grooved-End Flexible Pipe Couplings

by PIEDMONT PACIFIC CORPORATION     based in Vista, CALIFORNIA (USA)

Bolts/Nuts – Round-head, square-neck, type 316 stainless steel bolts and heavy hex nuts conform to ASTM F-593, Group 2, condition CW. Housings – Solid type 316 stainless steel Grade CF8M, Conforming to ASTM A 351, A 743 & A 744. Gaskets – EPDM rubber, suitable for hot and cold water service. Not suitable for petroleum ...

Axilock - Ultra - Model FP - Fire Protected Mechanical Pipe Couplings

by Teekay Couplings Limited     based in Old Beaconsfield, UNITED KINGDOM

The Teekay Axilock-FP represents the ultimate in high security fire protected mechanical pipe couplings. With its unique internal fire sleeve and double casing design it is plain to see why this coupling is the primary pipe connection of choice in the marine and naval market sectors. The Axilock-FP has been tested to military standards for shock ...

Model Style P - Low-Pressure Grooved-End Flexible Pipe Couplings

by PIEDMONT PACIFIC CORPORATION     based in Vista, CALIFORNIA (USA)

Designed expressly for brackish, M/F, U/F, and N/F, membrane filtration, permeate, waste water and other low pressure applications. Glass filled Noryl* Resin, 3X Safety margin, Light weight, completely corrosion proof, 200 psi (14 bar) working pressure through 2 1/2', Permanent, UV resistant, non water absorptive, Type 316 Stainless hardware, NSF ...

BBA Pumps - Model Art.01301054 - Discharge Pipes HDPE

by BBA Pumps     based in Doetinchem, NETHERLANDS

Discharge pipes HDPE with quick couplings with clamp 10'' IT female (cup/lever) and male (ball/ring) clamps 2x heavy duty length 10 m. max. pressure 5 bar.

BBA Pumps - Model Art.01221137 - Header Pipes HDPE

by BBA Pumps     based in Doetinchem, NETHERLANDS

Header pipes HDPE with quick couplings and branches 6'' Bauer male (ball/lever) and female (cup) Branches 5x 2'' female (cup) length 5,8 m.

Model Style K - Low-Pressure Grooved-End Flexible Pipe Couplings

by PIEDMONT PACIFIC CORPORATION     based in Vista, CALIFORNIA (USA)

Designed for MF/UF/BWRO and other low pressure applications. 300 psi (20 bar) working pressure rating. Bolts/Nuts – Round-head, square-neck, type 316 stainless steel bolts and heavy hex nuts conform to ASTM F-593, Group 2, condition CW. Housings – Solid type 316 stainless steel Grade CF8M, conforming to ASTM A 351, A 743 & A 744. ...

Model Style D - High-Pressure Grooved-End Flexible Pipe Couplings

by PIEDMONT PACIFIC CORPORATION     based in Vista, CALIFORNIA (USA)

1000 psi (70 bar) with schedule 40s pipe w/cut groove only – all sizes. For other pipe weights & sizes, use Style B ratings.

Model Style F - Medium-Pressure Grooved-End Flexible Pipe Couplings

by PIEDMONT PACIFIC CORPORATION     based in Vista, CALIFORNIA (USA)

Designed for brackish RO systems and other medium-pressure applications 400 psi (28 bar) working pressure rating. Bolts/Nuts – Round-head, square-neck, type 316 stainless steel bolts and heavy hex nut conform to ASTM A-593, Group 2, Condition CW. Housing – Solid Duplex/Superduplex stainless steel type CE8MN, conforming to ASTM A-890 ...

BBA Pumps - Model Art.01050905 - Discharge Pipes HDPE

by BBA Pumps     based in Doetinchem, NETHERLANDS

Discharge pipes HDPE with quick couplings 4'' Bauer male (ball/lever) and female (cup) length 5 m. max. pressure 3 bar.

STRAUB - Model FLEX 4 - Wide Pipe Coupling For The Restoration And Repair Of Metal Pipes

by Straub Werke AG     based in Wangs, SWITZERLAND

Diameter 323.9 to 4064.0 mmThe temperature ranges indicated are based on the use of EPDM sealing sleeves.EPDM sealing sleeves are used by default.All diameters and designs available plus accessories (strip inserts, stiffening rings, fitting pliers, tensioning straps) can be obtained from the technical manual.Construction and design of the ...

STRAUB - Model FLEX 3 - Axially Flexible Pipe Coupling For Pipes Of All Materials

by Straub Werke AG     based in Wangs, SWITZERLAND

Diameter 219.1 to 4064.0 mmThe temperature ranges indicated are based on the use of EPDM sealing sleeves.EPDM and NBR sealing sleeves are used by default.Various coupling sizes also available with FPM/FKM sealing sleeves (Temperature range: -20°C to 180°C).All diameters and designs available plus accessories (strip inserts, ...

Straub - Model GRIP-L - Pull Out Resistant Pipe Coupling For All Metal Pipes

by Straub Werke AG     based in Wangs, SWITZERLAND

Pull out resistant pipe coupling for all metal pipes.Diameter 26.9 to 609.6 mm.The temperature ranges indicated are based on the use of EPDM sealing sleeves.EPDM and NBR sealing sleeves are used by default.Various coupling sizes also available with VITON sealing sleeves (Temperature range: -20°C to 180°C).Various coupling sizes also ...

STRAUB - Model COMBI-GRIP - Pull Out Resistant Pipe Coupling For Transitions From Plastic To Metal Piping

by Straub Werke AG     based in Wangs, SWITZERLAND

Diameter 38.0/40.0 to 159.0/160.0 mm.The temperature ranges indicated are based on the use of EPDM sealing sleeves. EPDM and NBR sealing sleeves are used by default. All diameters and designs available plus accessories (strip inserts, stiffening rings, fitting pliers, tensioning straps) can be obtained from the technical manual. ...

Related Terms for pipe coupling

Need help finding the right suppliers?

Let the XPRTs do the work for you