Water & Wastewater Pumps Applications

58 Results found
Only show results in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pumps ×

Residual Gas Analysis

by Hiden Analytical     based in Warrington, UNITED KINGDOM

Residual Gas Analysis is a general term for the analysis of gas and vapour species in vacuum chambers and vacuum processes. The Hiden RGA series quadrupole mass spectrometers provide for routine, fast, wide dynamic range residual gas analysis, measuring the partial pressures of the species that are critical to vacuum quality and process requirements. Applications include: vacuum chamber leak detection vacuum quality measurement and monitoring virtual leak detection outgassing studies bakeout cycle/vacuum pump down monitoring

Constant pressure pump control for variable demand irrigation

by Cycle Stop Valves, Inc.     based in Lubbock, TEXAS (USA)

Mist, Drip, Spray, or Big Guns, the Cycle Stop Valve (CSV) turns any Submersible, Turbine, or Centrifugal pump into a variable flow, constant pressure system. The CSV maintains a constant pressure on the irrigation system throughout a wide range of flow. Eliminating line breaks and leaks, while precisely applying an exact amount of water, the CSV can conserve water as well as energy.

Pumping solutions for marine

by Hydro Prokav Pumps (India) Pvt. Ltd.     based in Sidco, INDIA

Fluids Handled - Fuel-injection, Oil burners, Boosting, Hydraulics, Fuel, Lubrication, Circulating and Feed Pumping.

Cavity pump for water and wastewater industry

by Moyno, Inc.     based in Springfield, OHIO (USA)

For more than 75 years, Moyno progressing cavity pumps have been successfully applied and widely used in the industrial and municipal wastewater treatment industry. Over the years Moyno has continually enhanced the design and operational performance of its products to innovate wastewater treatment solutions. Moyno provides an effective combination of products, process solutions and service support programs to keep plant operations running smoothly and efficiently with little downtime and minimal maintenance. Moyno also provides a broad offering and custom product design capabilities for critical application requirements.

Pumping solutions for vacuum conveying within meat

by Samson Pumps A/S     based in Viborg, DENMARK

When you need to transport meat products and waste over longer distances within cattle, chicken and pig abattoirs, energy consumption is a major consideration. The unique Samson vacuum conveying system with liquid ring pumps is not only extremely efficient it is also both highly energy efficient and gentle to the products.

Pumping & wastewater treatment solutions for military & government sector

by Smith & Loveless Inc.     based in Lenexa, KANSAS (USA)

When Uncle Sam comes calling, Smith & Loveless has dutifully enlisted itself for service in military and civilian applications. For decades, we have served our country with honor, providing long-lasting, durable water and wastewater treatment and pumping equipment that doesn`t tax the operator with heavy-duty maintenance and operation nor require audits from procurement authorities because of its long service life rating.

Municipal and industrial pumping systems

by Lindsay Corporation     based in Omaha, NEBRASKA (USA)

Watertronics provides cutting-edge pump systems to the Municipal market including cities, towns, and villages along with large government buildings, high-rises and skyscrapers.  We design custom pumping solutions to fit the broad spectrum of Municipal & Industrial needs, all with improved efficiencies designed to effectively reduce power and water consumption. From the small-horsepower modular booster designed to fit through a standard doorway to the high-horsepower water treatment facility with remote monitoring, Watertronics can provide the solution to most any Municipal water challenge.

Advanced water treatment equipments for desalination

by Advanced Equipment and Services, Inc. (AESINC)     based in Coconut Creek, FLORIDA (USA)

Areas that have no or limited surface water or groundwater may choose to desalinate seawater or brackish water to obtain drinking water. Reverse osmosis is the most common method of desalination, Sea Water Reverse Osmosis (SWRO) is a reverse osmosis desalination membrane process that has been commercially used since the early 1970s. Because no heating or phase changes are needed, energy requirements are low in comparison to other processes of desalination, though still much higher than other forms of water supply (including reverse osmosis treatment of wastewater).

Piping & ducting solutions for the industrial industry

by Proco Products, Inc.     based in Stockton, CALIFORNIA (USA)

All of the products manufactured by PROCO are designed to withstand even the most demanding industrial applications. We design our expansion joints and check valves to fit many different industrial applications, including paper and pulp systems, marine services, oil and gas, and many more. Whatever your industry may be, PROCO can help you find a solution for even your toughest industrial application. PROCO operates worldwide, and maintains one of the largest product inventories in North America.

Dye addition for the paper industry

by Watson-Marlow Fluid Technology Group     based in Falmouth, UNITED KINGDOM

Paper manufacturers are moving away from dedicated `make-up` rooms where traditionally they would mix their own dyes. Dyes are now delivered pre-packaged in totes. This creates a demand for a pump that can quickly and easily change from pumping one dye to another. With a Watson-Marlow peristaltic pump, the dye is contained within the tube so there is no need to flush between dye changes.

In addition, because the dye does not come into contact with any moving parts it will not damage the pump, reducing maintenance downtime and increasing reliability.

Liquid pumping for the pharmaceutical industry

by Watson-Marlow Fluid Technology Group     based in Falmouth, UNITED KINGDOM

SPS pumps have been successfully used in the cosmetics industry for many years for gentle transfer of shampoos, creams, pastes and lotions. The highest hygienic standards, no pulsation, gentle conveyance and CIP also make the SPS series pump very successful in biopharmaceutical applications.

Liquid pumping for the fine chemical industry

by Watson-Marlow Fluid Technology Group     based in Falmouth, UNITED KINGDOM

SPS pumps stand out from the competition for handling shear-sensitive suspensions, solutions, washing-up liquid and detergents, as well as very viscous media such as silicones

Albin peristaltic`s pumps for pharmaceuticals

by Albin Pump SAS     based in Goteborg, SWEDEN

Pumping / transfert / chemical dosing, liquid protein, vaccines, serum, plasma, syrups, lotions, shampoo, liquid soap, soap emulsions, perfume, deodorants, alcohol, glycerin, sweeteners.

Scale prevention in paper mills

by Fluid Dynamics International Ltd     based in Maidenhead, UNITED KINGDOM

Scaling in Paper Mills caused by hard water is an expensive and difficult problem. Vacuum Pumps, Sprays and heat exchangers all suffer from this phenomenon. Fluid Dynamics MagCAT has a non chemical proven method of preventing scaling Clients include Kimberly Clark, Alier Paper, Papertech.

Pump station level controllers for pump staton call outs

by Greyline Instruments Inc.     based in Long Sault, ONTARIO (CANADA)

Town operators were plagued by high level alarm call outs at two new sewage lift stations. Read how they used Greyline`s hybrid ultrasonic level controllers with dual sensor capability to put an end to level alarms.

Positive displacement pumps for mining industry

by Watson-Marlow Fluid Technology Group     based in Falmouth, UNITED KINGDOM

Watson-Marlow pumps are used throughout the world in many different types of mines sweeping out other pump types because of their significant advantages for handling difficult and abrasive fluids.

Positive displacement pumps for food and beverage industry

by Watson-Marlow Fluid Technology Group     based in Falmouth, UNITED KINGDOM

Watson-Marlow understands the challenges faced by food and beverage manufacturers. We know that your reputation and brand rely on product integrity and consistency. This is where our range of positive displacement pumps can help.

Vacuum excavation solutions for animal waste / bedding clean-up / dairy farm / zoo / horse stall clean-up and maintenance

by Vac-Tron Equipment     based in Okahumpka, FLORIDA (USA)

Vac‐Tron Equipment can be used for various clean‐ups involving animal waste and bedding. Large animal environments are cleaned‐up in zoos; animal waste drainage pits, pumping contaminated water out of holding tanks and transferring into disposal tanks, draining and cleaning animal housing ponds, horse stalls for daily maintenance to suck-up urine and solid waste; complete cleaning of bedding area of straw or wood shavings; removes urine that is not good for the horses to smell (like acid or methane gas). Dairy farms implement the same process thereby yielding a cleaner more sanitized living condition for their cows. By utilizing the high pressure water wand to clean ponds, stalls, cages, concrete, landscaping, etc., and removing all animal waste to ensure the health of all animals.

Hose pumps for building industry

by Albin Pump SAS     based in Goteborg, SWEDEN

Fibrous mortar: spraying machine manufacturer (shotcrete machine) (tunnelling) (Europe)

Hose pumps for gold mining industry

by Albin Pump SAS     based in Goteborg, SWEDEN

Gold mining is a tough, uncompromising process and the mining industry is equally demanding being driven by the goals of mine profitability, plant efficiency, cost minimisation and yield maximisation.

Need help finding the right suppliers?

Let the XPRTs do the work for you