Water & Wastewater Pumps Equipment

4646 Results found
Only show results in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pumps ×

Model Aquafer - Water Booster Systems

by USEMCO (Universal Sanitary Equipment Manufacturing Company)     based in Tomah, WISCONSIN (USA)

The Aquafer is USEMCO's below ground water booster pump station that is appropriate for all types of pumps when conditions require the structure be hidden from view. The interior is well lit and totally climate controlled with heat, powered ventilation, and dehumidifiers that provides the suitable environment for operators and today's VFD ...

Viking - Model LVP Series - Rotary Vane Pumps

by Viking Pump, Inc. - a unit of IDEX Corporation     based in Cedar Falls, IOWA (USA)

Vane pumps are used for liquid transfer applications ranging from chemicals to liquefied gases. Vanes extend from slots in the rotor, sweeping liquid through a cam-shaped cavity. The vanes provide high volumetric efficiency for lower total cost of ownership.

Small Integrated Pump Unit

by Shimge Pump Industry Group Co.,Ltd.     based in Wenling City, CHINA

Our small integrated pump unit is SP series, and it is widely used in many fields as listed below.

Submersible Hydraulic Pumps

by Gator Pump,Inc     based in Brownwood, TEXAS (USA)

Hydraulic pumps from 3' to 8' discharge with efficient piston motors. Power supplied by tractor hydraulics 01 Gator Power Units. Waste oil recovery is one of many uses.

Wheel-Treater - Model Jr. - Water Powered Chemical Pumps

by Chemstream     based in Stoystown, PENNSYLVANIA (USA)

The Wheel-Treater is a water powered chemical pump with a rugged and dependable stainless steel construction. Its uses are only limited to one's imagination. Wherever there is flowing water or wastewater that needs treatment, there is probably a Wheel-Treater application. Because it's powered by the natural flow of water, it requires no ...

RotaCut - Inline Macerator and Solids Separator

by Vogelsang Ltd     based in Crewe, UNITED KINGDOM

RotaCut - the Vogelsang original. Developed in the 90s, it is now an indispensable component in many systems. It is no coincidence that it is copied again and again. As a powerful wet macerator with an integrated heavy material separator, it is the ideal solution for problems with coarse and fibrous matter, as well as with foreign matter in pump ...

Mink - Model MI 2124/2122 BV - Rotary Claw Vacuum Pumps

by Dr.-Ing. K. Busch GmbH     based in Maulburg, GERMANY

These rotary claw vacuum pumps were developed especially for use in industrial applications where a high vacuum and totally oil-free compression are required. Mink vacuum pumps operate contact-free: neither oil nor water is needed for the compression process.

Minette Inox - Stainless Steel Pump

by Aquatech Pumping Solutions     based in Dehradun, INDIA

With its impressive allowed pH range, from 2 up to 10, it is hard to find an application that can't be handled by the Inox pumps. All materials in contact with the liquid are made out of AISI 316 stainless steel or better.)

Model 140 , 240, 180 and 280 Series - Regenerative Turbine Pumps

by MTH Pumps     based in Plano, ILLINOIS (USA)

140 , 240, 180 and 280 Series regenerative turbine pumps represent the most economical, high performance alternative for low flow (to 55 GPM) applications involving moderate to high pressures (heads to 700 feet). By combining years of regenerative turbine pump designs with precision computer controlled manufacturing, the 140 • 240 • 180 ...

Lift Stations Pumps

by W2 Systems     based in Brisbane, CALIFORNIA (USA)

W2 Systems is proud to present this exceptional line of lift stations, quality built and intelligently engineered. W2 Systems has been providing Lift Stations throughout the world and across the United States since 1986. We led the way into the Silicon Valley boom and continue to provide only the best quality today. We offer a line of Lift ...

RotoFlo - Model RWP006 - Self-Priming, Valveless Positive Displacement Pump

by MWI Corporation     based in Deerfield Beach, FLORIDA (USA)

Self-priming, valveless positive displacement pump – perfect for groundwater applications, including wellpoint dewatering. The RotoFlo™ simply is the best combination of reliability, low operating cost, rapid onsite repairs, flexibility and performance of any wellpoint pump on the market. Downtime is reduced thanks to the Maintenance ...

AutoPump - Model AP4Plus - Landfill and Remediation Pumping

by QED Environmental Systems     based in Dexter, MICHIGAN (USA)

The AP4+ was made easier to clean by using 3 bolts to attach the pump inlet and open up the pump. This is easier than having to rotate the inlet multiple turns to unthread it from the center tube inside the pump, especially under field conditions of silt, deposits and coatings. Removing the inlet is also aided by the new, precision ID pump casing, ...

Model 2AN - Horizontal Single Stage Pump

by Mecanex SA     based in Botosani, ROMANIA

Centrifugal mono-staged pumps with horizontal shaft. Axial suction, radial discharge on vertical direction. Impeller with backwards pallets for the balancing of axial forces. Oil-bath lubrication. Sealing with graphitized asbestos and stuffing box.

Model 70200 - Progressive Cavity Pumps

by Roper Pump Company     based in Commerce, GEORGIA (US) (USA)

Model 70200, the workhorse of our progressing cavity pump line, is ideal for handling a wide variety of materials which are often considered unpumpable. The 70200 offers the most economical solution for tough pumping problems like highly viscous, abrasive, shear sensitive, or solid-containing materials.

Model VN-95 - Liquid Ring Vacuum Pump

by Speck Pumpen Walter Speck GmbH & Co. KG     based in Roth, GERMANY

Single-stage pumps with valves and port cylinder. Close-coupled version with B35 close-to-standard motors. Bracket version with B5 standard motors. Sound pressure level 65 db(A)

Model RDN - Horizontal Single Stage Pump

by Mecanex SA     based in Botosani, ROMANIA

Centrifugal, mono staged pumps, horizontal axle, double flow-type impeller, both suction and discharge hole placed within  the horizontal plane.

Model TXVA - Variable Displacement Pump

by Hydro Leduc     based in AZERAILLES, FRANCE

With variable displacement and pressure-flow control -called Load Sensing- they automatically regulate to give just what is needed for each movement. Specifically designed for the needs of the truck hydraulic market, the TXV pumps are particularly attractive solutions for applications in loading cranes, forestry cranes, refuse vehicles, salt ...

NETZSCH TORNADO - Mobile Rotary Lobe Pump

by NETZSCH Group     based in Selb, GERMANY

A TORNADO rotary lobe pump fastened onto a mobile base – this is the NETZSCH TORNADO Mobile. The concept of mounting the equipment onto a car or truck trailer makes it possible to pump large quantities of fluids with solid content, wastewater and slurries at the most unusual of sites. Based on the given application, a TORNADO rotary lobe ...

AESINC - Model PS Series - Water Pump Skids

by Advanced Equipment and Services, Inc. (AESINC)     based in Coconut Creek, FLORIDA (USA)

Advanced Equipment and Services Inc. designs and builds special and customer designed pump skids. These units range from small 2 HP electrically driven hydraulic systems, to large 500 HP frac trailers.  Advanced Equipment and Services Inc. can build any configuration pump skid for pumping seawater. Advanced Equipment and Services Inc. also ...

APEX - Hose Pump

by Watson-Marlow Fluid Technology Group     based in Falmouth, UNITED KINGDOM

The newly expanded range of APEX hose pumps is ideal for aggressive and abrasive applications up to 116psi. With their seal-less, valve-less design, APEX pumps are engineered for a more competitive price/performance ratio vs high pressure hose pumps.

Need help finding the right suppliers?

Let the XPRTs do the work for you