centrifugal pump Equipment available in Armenia

Available in Armenia| Near Armenia
404 Results found

We couldn't find any centrifugal pump equipment in Armenia

Here is a list of results available in Armenia

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pumps ×

  • Keyword: centrifugal pump ×

  • Available in: Asia & Middle East ×

  • Available in: Armenia ×

DESMI - Model NSLV & NSLH - Vertical (NSLV) & Horizontal (NSLH) End-Suction Centrifugal Pump

by DESMI A/S     based in Noerresundby, DENMARK

DESMI has high quality and well established utility/district energy pumps on the market, with focus on high energy efficiency and long life cycle.

Model FMC-750-HYD - Centrifugal Pump

by agrotop GmbH     based in Obertraubling, GERMANY

Characteristics: Special wet sealing prevents pump damage when running dry. Sealing chamber filled with cooling fluid. Double spacer disc for best pump performance. Suction/discharge side with flange type quick connection.

Model NM - Centrifugal Pumps

by ASV Stübbe GmbH & Co. KG     based in Vlotho, GERMANY

Design Horizontal, single-stage, non self-priming chemical pump according to DIN 24256, EN 22858, ISO 2858 with single flow spiral casing of modular concept Robust, cast steel casing pump acc. To chemical industry standards. Mechanically sealed. Solid, exchangeable plastic components. Maintenance-friendly design. Wide range of options and ...

Model NMB - Centrifugal Pump

by ASV Stübbe GmbH & Co. KG     based in Vlotho, GERMANY

Short constructed block pump. Cast steel casing based on the chemical industry standard pump NM. Mechanically sealed. Robust, changeable plastic parts. Maintenance-friendly design. Wide range of options and accessories. Motor output: up to 7,5 kW. Sealing: EPDM, FPM. Connection: flange. Horizontal, single-stage, non self-priming chemical. pump ...

Dragon - Model 178 Series - Centrifugal Pump

by Dragon Products, Ltd - Modern Group LTD     based in La Porte, TEXAS (USA)

The concentric housing design reduces turbulence within the pump to minimize cavitation, shaft deflection, and excessive wear. The semi open impeller is designed to handle water or heavy slurries with equal efficiency. Replaceable wear plates protects the pedestal from wear and corrosion caused by fluids being pump, therefore, extending the life ...

Model CPM Series - Centrifugal Pumps

by Electrical & Pump Services Ltd (EPS)     based in Mallow, IRELAND

Centrifugal Pumps with flow ranges from 10 to 900 litres/min and pressure ratings to 7 bar. Suitable for suction lifts up to 7 mtrs and liquid temperatures of 90 C. Recommended for clean and non-aggressive liquids. Cast iron construction with brass impeller. Widely used for Domestic and Commercial water distribution. Can be used with pressure ...

Model FMC-650-HYD - Centrifugal Pump

by agrotop GmbH     based in Obertraubling, GERMANY

Characteristics: Special wet sealing prevents pump damage when running dry. Sealing chamber filled with cooling fluid. Double spacer disc for best pump performance. Suction/discharge side with flange type quick connection.

Model DIN TEX - Centrifugal Pump

by INOXPA     based in Leinfelden, GERMANY

The DIN-TEX is a sanitary high capacity centrifugal pump (up to 1000 m3/h). It is designed to work with a basic or semi-finished product. Its applications include processes of the food-processing industry, wine making or textile and chemical industries which are not characterised by strict hygienic requirements. Owing to the high flow, the pump is ...

Model DIN FOOD - Centrifugal Pump

by INOXPA     based in Leinfelden, GERMANY

Application: The DIN-FOOD pump is a hygienic high capacity centrifugal pump (up to 1000 m³/h) designed to cater for an unfulfilled need in the food-processing and chemical and pharmaceutical industries. Its applications include processes in the brewing, dairy and beverage industries in general, as well as in ultra-filtering processes. It can ...

Model PROLAC HCP-WFI - Centrifugal Pump

by INOXPA     based in Leinfelden, GERMANY

Higher standards are required in the pharmaceutical industry than in the food industry to pumping products like purified water (PW), water for injection (WFI), etc.

Dragon - Model 118 Series - Centrifugal Pump

by Dragon Products, Ltd - Modern Group LTD     based in La Porte, TEXAS (USA)

Whether you need centrifugal pumps or heavy-duty pumps for handling solid waste and trash, Dragon has you covered. We carry a full line of pumps that can run on a variety of fuels – electric, diesel, or natural gas. Dragon will also help you select the right pump with the right pressure to insure you don’t incur extra horsepower ...

Vortex - Model VP 75 0,8 HP - Centrifugal Pumps

by Vortex Pompa Hidrofor-Gür Mühendislik Ltd.Sti     based in Yenisehir / IZMIR, TURKEY

6.5 m suction bronze impeller, rubbing impeller pumps. 0.8 HP TO 1' with  outlet hole. Thermic protection. Hmax = 65 mss - 0.3 m³/h. Qmax = 18 mss - 2.4 m³/h.

Model MU Series - Centrifugal Pumps

by Pompe Garbarino S.p.A.     based in Acqui Terme (Alessandria), ITALY

Fresh and sea water, condensate, oils, chemical and petrochemical products. Shipbuilding industry, heating plants, air conditioning system, aqueducts, effluent treatment plants, fire fighting, petrochemical plants.

Levitronix - Model BPS-1 - Centrifugal Pump

by Levitronix GmbH     based in CH-8005, SWITZERLAND

Levitronix has developed a revolutionary centrifugal pump that has no bearings to wear out or seals to break. Based on the principles of magnetic levitation, the pump’s impeller is suspended contact-free inside a sealed casing and is driven by the magnetic field of the motor. The impeller and casing are both fabricated ...

Model PROLAC HCP - Centrifugal Pump

by INOXPA     based in Leinfelden, GERMANY

Due to the choice of materials and its design, centrifugal pump PROLAC HCP is appropriate for applications requiring a high level of hygiene, gentle handling of the product and resistance to chemical agents. This centrifugal pump is particularly suitable as main process pump in the dairy, beverage, pharmaceutical and cosmetic industries.

Model ESTAMPINOX EFI - Centrifugal Pump

by INOXPA     based in Leinfelden, GERMANY

The Estampinox EFI pump is a stainless steel centrifugal pump for the transfer of water and other liquids. It is designed to cater for the needs of auxiliary services in the food-processing, chemical, pharmaceutical and wine-making industries.

Model SHB - Centrifugal Pump

by ASV Stübbe GmbH & Co. KG     based in Vlotho, GERMANY

Centrifugal block pump accord. to chemical industry standards. Mechanically sealed. Good availability due to modular design. Solid, exchangeable plastic components. Maintenance-friendly design. Wide range of options and accessories. Motor output: up to 11 kW. Sealing: EPDM, FPM. Connection: flange, socket, spigot. Horizontal, single-stage pump ...

Centrifugal Pumps

by Cat Pumps     based in Minneapolis, MINNESOTA (USA)

Cat Pumps offers a line of centrifugal pumps that complements our piston and plunger pump product line. These pumps offer solutions to high-flow, low-pressure pumping needs. The pump housings are made of bulge formed 304 stainless steel that is stronger, lighter, more durable and more cost-effective than conventional cast iron pumps. There are ...

Centrifugal Pumps

by Litostroj Power     based in Ljubljana, SLOVENIA

Singe or multi-stage pumps, discharge capacity up to 2.000 l/s and delivery head up to 450 m, horizontal or vertical design, usage for water supply in general industry, power plants, deep-wells, and for drainage and sewage treatment in general industryi, single or double-suction impeller.

Model HPP - Centrifugal Pumps

by Finder Pompe S.r.l.     based in Merate (LC), ITALY

The HPP pumps are designed and manufactured according to API 610, 11th edition and are suitable for heavy duty applications in the oil and gas, refining and petrochemical industry. Designed to run at 50 or 60 Hz., with temperatures ranging from -100°C to +400°C, these pumps provide very high reliability, high interchangeability, easy ...

Need help finding the right suppliers?

Let the XPRTs do the work for you