chopper pump Equipment available in Idaho

Available in Idaho| Near Idaho
20 Results found

We couldn't find any chopper pump equipment in Idaho

Here is a list of results available in Idaho

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pumps ×

  • Keyword: chopper pump ×

  • Available in: USA ×

  • Available in: Idaho ×

Waste water pump - Model Chopper pump - Submersible chopper pump

by DeTech Pumps Co. Ltd.     based in Nanjing, CHINA

CS series New Generation Chopper PumpAs the increase of population worldwide, and large capacity of waste water effluent. to protect the environment from pollution and to improve the mankind circumstance, and be harmonious with nature. People have to treat all the wastes mankind made. Like water, air, etc.For the water treatment, we have to ...

Waste water pump - Model CS Series - Chopper pump

by DeTech Pumps Co. Ltd.     based in Nanjing, CHINA

CS series New Generation Chopper PumpAs the increase of population worldwide, and large capacity of waste water effluent. to protect the environment from pollution and to improve the mankind circumstance, and be harmonious with nature. People have to treat all the wastes mankind made. Like water, air, etc.For the water treatment, we have to ...

Chopper Pump

by Haynes Equipment Co Inc     based in Olathe, KANSAS (USA)

A chopper pump is a centrifugal pump, which is equipped with a cutting system to facilitate chopping/maceration of solids that are present in the pumped liquid. The main advantage of this type of pump is that it prevents clogging of the pump itself and of the adjacent piping, as all the solids and stringy materials are macerated by the chopping ...

Model SERIES ULTRA - Vertical Chopper Pump

by DODA COSTRUZIONE MACCHINE AGRICOLE     based in Buscoldo, ITALY

The machines described is a chopping, emulsifying, mixing vertical-axis pump. It consists in the combination of SUPER pumps and Movred bladed units. These pumps are disegned for the management of thick and non-homogeneous manure.

High Pressure Chopper Pump For Dry Installation MPTK-I

by Landia     based in Lem, DENMARK

Dry-installed pump for industrial purposes, fitted with cast iron casing. 10 motor sizes from 2.2 to 30 kW. Capacity up to approx. 220 m³/hour. Horizontal or vertical installation (fixed) (shown here with horizontal support leg).

Medium Pressure Stainless Steel Chopper Pump For Dry Installation MPTKR-I

by Landia     based in Lem, DENMARK

Dry-installed pump for industrial purposes with acid-proof cast stainless steel casing. Seven motor sizes from 3.0 to 18.5 kW. Capacity up to approx. 380 m³/hour. Horizontal or vertical installation (fixed)  (shown here with horizontal support leg).

Model E Series - Electric Submersible Pump

by Vaughan Company., Inc.     based in Montesano, WASHINGTON (USA)

Traditional submersible desigfi Upgraded lower seal is standard Hydraulic version also available

Recirculator Wet Well Pump

by Vaughan Company., Inc.     based in Montesano, WASHINGTON (USA)

Easy above-deck access to valve and nozzle operators. Manual or fully automated operation available. Recirculation feat ure also mailable with Horizontal and Self-priming configurations

Landia - Model AXP-I 500 - Recirculation Axial Pump

by Landia     based in Lem, DENMARK

Submersible axial pump for waste water treatment plants and industry: Six motor sizes from 2.2 to 11.0 kW. Capacity up to approx. 2900 m³/hour. Pipe diameter 500 mm.

Landia - Model AXD-I 300 - Recirculation Pump

by Landia     based in Lem, DENMARK

Submersible axial pump for waste water treatment plants and industry: Four motor sizes from 1.5 to 4.0 kW. Capacity up to approx. 800 m³/hour. Pipe diameter 300 mm.

High Pressure Submersible Pump DGER-I

by Landia     based in Lem, DENMARK

Submersible pump with acid-proof stainless steel casing. All components are coated with epoxy resin. 14 motor sizes from 0.55 to 30 kW. Pump diameters from 50 to 150 mm. Capacity up to approx. 220 m³/hour. Horizontal or vertical installation (shown here with horizontal support leg).

Landia - Model AXP-I 800 - Recirculation Axial Pump

by Landia     based in Lem, DENMARK

Submersible axial pump for waste water treatment plants and industry: Four motor sizes from 7.5 to 18.0 kW. Capacity up to approx. 5000 m³/hour. Pipe diameter 800 mm.

High Pressure Slurry Pump For Dry Installation MPTK

by Landia     based in Lem, DENMARK

Dry-installed pump for slurry handling in agriculture, fitted with cast iron casing. 10 motor sizes from 2.2 to 30 kW. Capacity up to approx. 475 m³/hour. Horizontal or vertical installation (fixed) (shown here with horizontal support leg). Supplied without knife system (available with standard- or extended knife system). Can be used as ...

Model TNO 100 L - Slurry Version Pump

by OCMIS irrigation     based in Castelvetro di Modena, ITALY

The pumps of the serie TNO L are suitable for slurry and dirty water with a small percetage of suspended solids. The OCT K serie has been designes for use with equipment requiring high working pressure for pumping slurry and dirty water. The strong rotary blade chopper and special design of the three blades impeller allow the pumping of thick ...

Model TLK Series - Tractor Pump

by AgriBusiness International, Inc.     based in Villa Rica, GEORGIA (US) (USA)

The TLK Series specifically manufactured for pumping animal waste containing solids in suspension. These pumps are equipped with a new chopper system able to reduce solid content and crumble fibers such as straw, leaves, forage residuals etc. contained in the pumped liquid. The new chopper not only avoids the pump and pipes from clogging but even ...

Wastewater Pumps / Water Pumps

by Claro Inc     based in Montreal, QUEBEC (CANADA)

Claro provides a selection of high quality pumps including: Chopper pumps. Recirculation pumps. Aerator pumps. Grit/slurry pumps. Self-priming grit slurry pumps. Vertical wet pit pumps. Dry pit solids handling pumps. Submersible solids handling pumps. Sludge pumps. Vortex pumps. Ni hard vortex pumps. Severe duty cup type recessed impeller pumps. ...

Toyo - Model DEC Series - Heavy Duty Vertical Cantilever Slurry Pump

by Toyo Pumps North America     based in Burnaby, BRITISH COLUMBIA (CANADA)

The DEC series offers all the advantages of a recessed impeller pump in a vertical cantilever package, meaning no submerged bearings, bushings and seals. The high chrome recessed impeller allows for an unobstructed passage through the pump casing (also made of high chrome construction) which allows solids, up to the full diameter of the discharge, ...

Discflo - Sump And Dry Pit Pumps

by Discflo Corporation     based in Santee, CALIFORNIA (USA)

Discflo manufactures a complete line of sump and dry pit pumps for heavy-duty sewage, sludge and slurry applications. Using the unique Discpac technology, these pumps provide clog-free, low cost, long-lived operation, outperforming progressive cavity, centrifugal, lobe and chopper pumps in even the toughest installations. Sump Disc Pumps have a ...

Dragflow - Model EL60 RI - No Clog Pump

by Dragflow S.r.l.     based in Villafranca, ITALY

Dragflow welcome its newborn No Clog Pump EL60 RI. The first of the upcoming series of Recessed Impeller Pumps. No Clog Pump will present for the first time at Pollutec, the 26th international exhibition of environmental equipments technologies and services (Lyon Eurexpo France, December 2 -5).

BioChop Hygienisation Unit

by Landia     based in Lem, DENMARK

We have developed and patented a new hygienisation unit for treatment of category 3 by-products and waste. The process is based on applicable EU regulation. The unique design of the hygienisation unit makes it possible to chop solid parts reducing their size, to mix, to heat-treat and to empty the tank by using the same Landia chopper pump. The ...

Need help finding the right suppliers?

Let the XPRTs do the work for you