We couldn't find any chopper pump equipment suppliers or service providers located in Nevada

Here is a list of equipment results with suppliers serving Nevada

chopper pump Equipment available in Nevada

  • Waste water pump - Model Chopper pump - Submersible chopper pump

    CS series New Generation Chopper PumpAs the increase of population worldwide, and large capacity of waste water effluent. to protect the environment from pollution and to improve the mankind circumstance, and be harmonious with nature. People have to treat all the wastes mankind made. Like water, air, etc.For the water treatment, we have to ...

    By DeTech Pumps Co. Ltd. based in Nanjing, CHINA.

  • Waste water pump - Model CS Series - Chopper pump

    CS series New Generation Chopper PumpAs the increase of population worldwide, and large capacity of waste water effluent. to protect the environment from pollution and to improve the mankind circumstance, and be harmonious with nature. People have to treat all the wastes mankind made. Like water, air, etc.For the water treatment, we have to ...

    By DeTech Pumps Co. Ltd. based in Nanjing, CHINA.

  • Chopper Pump

    A chopper pump is a centrifugal pump, which is equipped with a cutting system to facilitate chopping/maceration of solids that are present in the pumped liquid. The main advantage of this type of pump is that it prevents clogging of the pump itself and of the adjacent piping, as all the solids and stringy materials are macerated by the chopping ...

    By Haynes Equipment Co Inc based in Olathe, KANSAS (USA). from Wastewater Specialty Pumps Product line

  • Model SERIES ULTRA - Vertical Chopper Pump

    The machines described is a chopping, emulsifying, mixing vertical-axis pump. It consists in the combination of SUPER pumps and Movred bladed units. These pumps are disegned for the management of thick and non-homogeneous manure.

    By DODA COSTRUZIONE MACCHINE AGRICOLE based in Buscoldo, ITALY. from Pumps Product line

  • High Pressure Chopper Pump For Dry Installation MPTK-I

    Dry-installed pump for industrial purposes, fitted with cast iron casing. 10 motor sizes from 2.2 to 30 kW. Capacity up to approx. 220 m³/hour. Horizontal or vertical installation (fixed) (shown here with horizontal support leg).

    By Landia based in Lem, DENMARK. from Chopper Pumps - Dry-Installed Pumps Product line

  • Medium Pressure Stainless Steel Chopper Pump For Dry Installation MPTKR-I

    Dry-installed pump for industrial purposes with acid-proof cast stainless steel casing. Seven motor sizes from 3.0 to 18.5 kW. Capacity up to approx. 380 m³/hour. Horizontal or vertical installation (fixed)  (shown here with horizontal support leg).

    By Landia based in Lem, DENMARK. from Chopper Pumps - Dry-Installed Pumps Product line

  • Model E Series - Electric Submersible Pump

    Traditional submersible desigfi Upgraded lower seal is standard Hydraulic version also available

    By Vaughan Company., Inc. based in Montesano, WASHINGTON (USA). from Chopper Pumps Product line

  • Landia - Model AXP-I 800 - Recirculation Axial Pump

    Submersible axial pump for waste water treatment plants and industry: Four motor sizes from 7.5 to 18.0 kW. Capacity up to approx. 5000 m³/hour. Pipe diameter 800 mm.

    By Landia based in Lem, DENMARK. from Chopper Pumps - Axial Pumps Product line

  • High Pressure Submersible Pump DGER-I

    Submersible pump with acid-proof stainless steel casing. All components are coated with epoxy resin. 14 motor sizes from 0.55 to 30 kW. Pump diameters from 50 to 150 mm. Capacity up to approx. 220 m³/hour. Horizontal or vertical installation (shown here with horizontal support leg).

    By Landia based in Lem, DENMARK. from Chopper Pumps - Submersible Pumps Product line

  • Landia - Model AXD-I 300 - Recirculation Pump

    Submersible axial pump for waste water treatment plants and industry: Four motor sizes from 1.5 to 4.0 kW. Capacity up to approx. 800 m³/hour. Pipe diameter 300 mm.

    By Landia based in Lem, DENMARK. from Chopper Pumps - Axial Pumps Product line

  • Landia - Model AXP-I 500 - Recirculation Axial Pump

    Submersible axial pump for waste water treatment plants and industry: Six motor sizes from 2.2 to 11.0 kW. Capacity up to approx. 2900 m³/hour. Pipe diameter 500 mm.

    By Landia based in Lem, DENMARK. from Chopper Pumps - Axial Pumps Product line

  • High Pressure Slurry Pump For Dry Installation MPTK

    Dry-installed pump for slurry handling in agriculture, fitted with cast iron casing. 10 motor sizes from 2.2 to 30 kW. Capacity up to approx. 475 m³/hour. Horizontal or vertical installation (fixed) (shown here with horizontal support leg). Supplied without knife system (available with standard- or extended knife system). Can be used as ...

    By Landia based in Lem, DENMARK. from Chopper Pumps - Dry-Installed Pumps Product line

  • Model TNO 100 L - Slurry Version Pump

    The pumps of the serie TNO L are suitable for slurry and dirty water with a small percetage of suspended solids. The OCT K serie has been designes for use with equipment requiring high working pressure for pumping slurry and dirty water. The strong rotary blade chopper and special design of the three blades impeller allow the pumping of thick ...

    By OCMIS irrigation based in Castelvetro di Modena, ITALY. from Pumps Product line

  • Model TLK Series - Tractor Pump

    The TLK Series specifically manufactured for pumping animal waste containing solids in suspension. These pumps are equipped with a new chopper system able to reduce solid content and crumble fibers such as straw, leaves, forage residuals etc. contained in the pumped liquid. The new chopper not only avoids the pump and pipes from clogging but even ...

    By AgriBusiness International, Inc. based in Villa Rica, GEORGIA (US) (USA). from Slurry - Waste Pumps Product line

  • Wastewater Pumps / Water Pumps

    Claro provides a selection of high quality pumps including: Chopper pumps. Recirculation pumps. Aerator pumps. Grit/slurry pumps. Self-priming grit slurry pumps. Vertical wet pit pumps. Dry pit solids handling pumps. Submersible solids handling pumps. Sludge pumps. Vortex pumps. Ni hard vortex pumps. Severe duty cup type recessed impeller pumps. ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Screening & Grit Removal Product line

  • Toyo - Model DEC Series - Heavy Duty Vertical Cantilever Slurry Pump

    The DEC series offers all the advantages of a recessed impeller pump in a vertical cantilever package, meaning no submerged bearings, bushings and seals. The high chrome recessed impeller allows for an unobstructed passage through the pump casing (also made of high chrome construction) which allows solids, up to the full diameter of the discharge, ...

    By Toyo Pumps North America based in Burnaby, BRITISH COLUMBIA (CANADA). from Vertical Cantilever Slurry Pumps Product line

  • Dragflow - Model EL60 RI - No Clog Pump

    Dragflow welcome its newborn No Clog Pump EL60 RI. The first of the upcoming series of Recessed Impeller Pumps. No Clog Pump will present for the first time at Pollutec, the 26th international exhibition of environmental equipments technologies and services (Lyon Eurexpo France, December 2 -5).

    By Dragflow S.r.l. based in Villafranca, ITALY.

  • Discflo - Vertical Dry Pit Pumps

    Vertical Dry Pit Pumps are ideal for heavy-duty sewage, sludge and slurry applications. Discflo manufactures a complete line of sump and dry pit pumps for heavy-duty sewage, sludge and slurry applications. Using the unique Discpac technology, these pumps provide clog-free, low cost, long-lived operation, outperforming progressive cavity, ...

    By Discflo Corporation Inc. based in Santee, CALIFORNIA (USA).

  • BioChop Hygienisation Unit

    We have developed and patented a new hygienisation unit for treatment of category 3 by-products and waste. The process is based on applicable EU regulation. The unique design of the hygienisation unit makes it possible to chop solid parts reducing their size, to mix, to heat-treat and to empty the tank by using the same Landia chopper pump. The ...

    By Landia based in Lem, DENMARK. from Process Units Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you