We couldn't find any deep wells pumps equipment suppliers or service providers located in Wisconsin

Here is a list of equipment results with suppliers serving Wisconsin

Deep Wells Pumps (Water and Wastewater Pumps) equipment available in Wisconsin

  • Premium

    Singer Valve - Model 106/206-DW - Deep Well Pump Control Valve – Double Chamber

    The 106-DW and 206-DW deep well pump control valves are installed in a tee between the pump discharge and the check valve. The valve is normally open, and, on pump start-up, a pilot solenoid is energized to start closing the valve at a rate governed by the closing speed control.

    By Singer Valve Inc. based in Surrey, BRITISH COLUMBIA (CANADA). from Pump Control Valves Product line

  • Model DP, VPH, HMF - Deep Well Pumps

    This vertical and semi-axial pump converses the capacity range up to 600 (l/s) against head of up to 210 (m), “DP” and “VPH” type are produced as single and multistage pumps while “HMF” type is manufactured only as single stage pump. Centrifugal pump with one or more semi axial impellers. It is applied for ...

    By MZT Pumpi based in Skopje, MACEDONIA. from Centrifugal Pumps Product line

  • Simflo - Deep Well Pumps

    Simflo's standard discharge head is cast of high grade iron, designed with the strength and rigidity to support the weight of a deep pump setting. Heads are provided with a discharge flange drilled to match 150lb ANSI connections. The bottom face of the discharge head is fully machined to allow for a level installation. Simflo's discharge heads ...

    By Simflo Pumps Inc based in Willcox, ARIZONA (USA).

  • Model 61-02/661-02 - Deep Well Pump Control Valve

    The Cla-Val Model 61-02/661-02 Deep Well Pump Control Valve is designed to protect pipelines from surges caused by the starting and stopping of deep well pumps. This is a hydraulically operated diaphragm valve which is controlled by a solenoid pilot valve. Separate adjustable flow control valves in the pilot system regulate the opening and closing ...

    By Cla-Val based in Costa Mesa, CALIFORNIA (USA). from Waterworks Products - Pump Control Valves Product line

  • Model 61-02KO/661-02KO - Deep Well Pump Control Valve with KO Anti-Cavitation Controls

    The Cla-Val Model 61-02KO/661-02KO Deep Well Pump Control Valve is designed to protect pipelines from surges caused by the starting and stopping of deep well pumps. This is a hydraulically operated diaphragm valve which is controlled by a solenoid pilot valve and equipped with Cla-Val's KO Anti-Cavitation trim to protect the valve and adjacent ...

    By Cla-Val based in Costa Mesa, CALIFORNIA (USA). from Waterworks Products - Pump Control Valves Product line

  • Model VP Series - Stainless Casting Deep-Well Submersible Pump

    VP Series - Stainless casting deep-well submersible pump, all parts contacted with liquid are made of stainless steel. It is widely used in water reverse osmosis systems and water works, high rise building boosting applications, process water system, high pressure washing systems, mining/ marine, ground water pumping applications, fire systems.

    By U-Flo Pumps International LLC. based in Seattle, WASHINGTON (USA). from Deepwell Pumps Product line

  • Premium

    DESMI - Model Deslube Series - Submerged Lubrication Oil Pump

    The DESLUBE series is a submerged deep well pump designed for Main Engine Lubrication oil supply for especially large two-stroke engines. The design is based on our long time experience of manufacturing deep-well pumps as well as the design features from our in-line centrifugal series. The pump is placed in the tank sump supported by dome flange ...

    By DESMI A/S based in Noerresundby, DENMARK. from Marine & Offshore Product line

  • Unitra - Model SW & DW Series - Shallow & Deep Well, Convertible Jet Pumps

    State-Of-The-Art pump design to deliver a large volume of water at high pressure. Durable cast iron pump casing with rubber 'O' ring seals for durability and simplicity in repair. Built-in molded ejector that elimiates the need for external bolt-on adaptors. Durable high strength molded impeller and diffuser that are easily replaceable. Easy ...

    By Unitra Inc, based in Stafford, TEXAS (USA). from Jet Pumps Product line

  • Premium

    Singer Valve - Model SPC - Pump Control Panel

    The SPC pump control panel provides the interface between the pump motor starter and the Singer pump control valve. The SPC ensures that the pump starts and stops without causing line surges.

    By Singer Valve Inc. based in Surrey, BRITISH COLUMBIA (CANADA). from Electronic Controls Product line

  • Global Pump - Stainless Steel Pump

    Electric Submersible Stainless Steel Pumps from Global Pump are designed for service in light acid or salt water applications. The upper cover, pump casing, impeller, motor frame and motor shaft are made of 304 Stainless Steel for superior corrosion resistance. The Global Pump Stainless Steel Pump features an environmentally friendly, oil bathed, ...

    By Global Pump Company - a Mersino Company based in Davison, MICHIGAN (USA). from Submersible Pumps Product line

  • Model HN Series - Shallow Well Jet Pumps

    ProJet HN models provide excellent performance with good pressure for wells to 25' deep.  Self-priming after the priming chamber has been filled with water.

    By Mainor Tile & Irrigation, Inc. based in Wallace, NORTH CAROLINA (USA).

  • Centrifugal Pumps

    Singe or multi-stage pumps, discharge capacity up to 2.000 l/s and delivery head up to 450 m, horizontal or vertical design, usage for water supply in general industry, power plants, deep-wells, and for drainage and sewage treatment in general industryi, single or double-suction impeller.

    By Litostroj Power based in Ljubljana, SLOVENIA. from Pumps Product line

  • Model 192A - Windmill Pump

    This large-capacity pump is designed for cisterns or wells 15 to 30 feet deep, but may be used in deeper wells by lowering the all-iron cylinder to within 15 feet of the water. Very serviceable, well constructed and easily operated. The pump top clamps on with heavy clamps permitting adjustment of handle to any position. The base is also ...

    By Hitzer, Inc. based in Berne, INDIANA (USA). from Pumps Product line

  • Subteck - Model RI 4 and 6 - Submersible Pumps

    Submersible pumps for deep wells of 6inch or greater diameter. Sized for connection to 4” Franklin motors up to 7.5 kw and 6” Franklin motors to 37 kw. Flow rates from 50 lpm to 950 lpm. Heads up to 350 m3/hr. Recommended for pumping clean water with a sand content no higher than 100 g/m3. High efficiency pumps with stainless shell and ...

    By Electrical & Pump Services Ltd (EPS) based in Mallow, IRELAND. from Pumping Product line

  • Submersible Pumps

    Special pumps for ground water monitoring type MP 1.

    By German Water & Energy (GWE) pumpenboese GmbH based in Peine, GERMANY. from Pumps Product line

  • Multiphase Pumps

    Conventional methods for producing oil and gas are successfully replaced by a simpler, more economic technology known as multiphase pumping. Multiphase pumping does not require separation of oil, gas, or water, so production from the field can be gathered and transported to a central processing area without requiring separate flow lines, ...

    By Leistritz Corporation based in Allendale, NEW JERSEY (USA). from Pumps Product line

  • Model J+ - Convertible Jet Pumps

    Specifically designed for: Homes, Farms, Cottages, Booster Service. Convertible: May be used on shallow or deep well applications using appropriate Goulds Water Technology fittings.

    By Goulds Water Technology - a Xylem brand based in Seneca Falls, NEW YORK (USA). from Jet Pumps- Convertible Jet Pumps Product line

  • 4 Inch Submersible Pump

    Water pumps for deep wells Submersible Pump of 4' Dia. Sized for connection to the motor according to NEMA standards. Stainless steel discharge head with built-in non-return valve. High Efficiency stainless steel Bowls and Impellers. Stainless Steel motor connector. Stainless Steel pump casing. Stainless steel pump shaft, coupling and wire guard. ...

    By Submersibles and Electric Inc. (SEI) based in Phoenix, ARIZONA (USA). from Submersible Pumps Product line

  • 6 Inch Submersible Pump

    Water pumps for deep wells Submersible Pump of 6' Dia. Sized for connection to the motor according to NEMA standards. Stainless steel discharge head with built-in non-return valve. High Efficiency stainless steel Bowls and Impellers. Stainless Steel motor connector. Stainless Steel pump casing. Stainless steel pump shaft, coup

    By Submersibles and Electric Inc. (SEI) based in Phoenix, ARIZONA (USA). from Submersible Pumps Product line

  • 8 Inch Submersible Pump

    Water pumps for deep wells Submersible Pump of 8' Dia. Sized for connection to the motor according to NEMA standards. Stainless steel discharge head with built-in non-return valve. High Efficiency stainless steel Bowls and Impellers. Stainless Steel motor connector. Stainless Steel pump casing. Stainless steel pump shaft, coup

    By Submersibles and Electric Inc. (SEI) based in Phoenix, ARIZONA (USA). from Submersible Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you