We couldn't find any deep wells pumps equipment suppliers or service providers located in Zaire

Here is a list of equipment results with suppliers serving Zaire

Deep Wells Pumps (Water and Wastewater Pumps) equipment available in Zaire

  • Premium

    Singer Valve - Model 106/206-DW - Deep Well Pump Control Valve – Double Chamber

    The 106-DW and 206-DW deep well pump control valves are installed in a tee between the pump discharge and the check valve. The valve is normally open, and, on pump start-up, a pilot solenoid is energized to start closing the valve at a rate governed by the closing speed control.

    By Singer Valve Inc. based in Surrey, BRITISH COLUMBIA (CANADA). from Pump Control Valves Product line

  • Model DP, VPH, HMF - Deep Well Pumps

    This vertical and semi-axial pump converses the capacity range up to 600 (l/s) against head of up to 210 (m), “DP” and “VPH” type are produced as single and multistage pumps while “HMF” type is manufactured only as single stage pump. Centrifugal pump with one or more semi axial impellers. It is applied for ...

    By MZT Pumpi based in Skopje, MACEDONIA. from Centrifugal Pumps Product line

  • Simflo - Deep Well Pumps

    Simflo's standard discharge head is cast of high grade iron, designed with the strength and rigidity to support the weight of a deep pump setting. Heads are provided with a discharge flange drilled to match 150lb ANSI connections. The bottom face of the discharge head is fully machined to allow for a level installation. Simflo's discharge heads ...

    By Simflo Pumps Inc based in Willcox, ARIZONA (USA).

  • Model 61-02/661-02 - Deep Well Pump Control Valve

    The Cla-Val Model 61-02/661-02 Deep Well Pump Control Valve is designed to protect pipelines from surges caused by the starting and stopping of deep well pumps. This is a hydraulically operated diaphragm valve which is controlled by a solenoid pilot valve. Separate adjustable flow control valves in the pilot system regulate the opening and closing ...

    By Cla-Val based in Costa Mesa, CALIFORNIA (USA). from Waterworks Products - Pump Control Valves Product line

  • Model VP Series - Stainless Casting Deep-Well Submersible Pump

    VP Series - Stainless casting deep-well submersible pump, all parts contacted with liquid are made of stainless steel. It is widely used in water reverse osmosis systems and water works, high rise building boosting applications, process water system, high pressure washing systems, mining/ marine, ground water pumping applications, fire systems.

    By U-Flo Pumps International LLC. based in Seattle, WASHINGTON (USA). from Deepwell Pumps Product line

  • Premium

    DESMI - Model Deslube Series - Submerged Lubrication Oil Pump

    The DESLUBE series is a submerged deep well pump designed for Main Engine Lubrication oil supply for especially large two-stroke engines. The design is based on our long time experience of manufacturing deep-well pumps as well as the design features from our in-line centrifugal series. The pump is placed in the tank sump supported by dome flange ...

    By DESMI A/S based in Noerresundby, DENMARK. from Marine & Offshore Product line

  • Unitra - Model SW & DW Series - Shallow & Deep Well, Convertible Jet Pumps

    State-Of-The-Art pump design to deliver a large volume of water at high pressure. Durable cast iron pump casing with rubber 'O' ring seals for durability and simplicity in repair. Built-in molded ejector that elimiates the need for external bolt-on adaptors. Durable high strength molded impeller and diffuser that are easily replaceable. Easy ...

    By Unitra Inc, based in Stafford, TEXAS (USA). from Jet Pumps Product line

  • Premium

    Singer Valve - Model SPC - Pump Control Panel

    The SPC pump control panel provides the interface between the pump motor starter and the Singer pump control valve. The SPC ensures that the pump starts and stops without causing line surges.

    By Singer Valve Inc. based in Surrey, BRITISH COLUMBIA (CANADA). from Electronic Controls Product line

  • Global Pump - Stainless Steel Pump

    Electric Submersible Stainless Steel Pumps from Global Pump are designed for service in light acid or salt water applications. The upper cover, pump casing, impeller, motor frame and motor shaft are made of 304 Stainless Steel for superior corrosion resistance. The Global Pump Stainless Steel Pump features an environmentally friendly, oil bathed, ...

    By Global Pump Company - a Mersino Company based in Davison, MICHIGAN (USA). from Submersible Pumps Product line

  • Centrifugal Pumps

    Singe or multi-stage pumps, discharge capacity up to 2.000 l/s and delivery head up to 450 m, horizontal or vertical design, usage for water supply in general industry, power plants, deep-wells, and for drainage and sewage treatment in general industryi, single or double-suction impeller.

    By Litostroj Power based in Ljubljana, SLOVENIA. from Pumps Product line

  • Subteck - Model RI 4 and 6 - Submersible Pumps

    Submersible pumps for deep wells of 6inch or greater diameter. Sized for connection to 4” Franklin motors up to 7.5 kw and 6” Franklin motors to 37 kw. Flow rates from 50 lpm to 950 lpm. Heads up to 350 m3/hr. Recommended for pumping clean water with a sand content no higher than 100 g/m3. High efficiency pumps with stainless shell and ...

    By Electrical & Pump Services Ltd (EPS) based in Mallow, IRELAND. from Pumping Product line

  • Submersible Pumps

    Special pumps for ground water monitoring type MP 1.

    By German Water & Energy (GWE) pumpenboese GmbH based in Peine, GERMANY. from Pumps Product line

  • Multiphase Pumps

    Conventional methods for producing oil and gas are successfully replaced by a simpler, more economic technology known as multiphase pumping. Multiphase pumping does not require separation of oil, gas, or water, so production from the field can be gathered and transported to a central processing area without requiring separate flow lines, ...

    By Leistritz Corporation based in Allendale, NEW JERSEY (USA). from Pumps Product line

  • Model EAH Series - High Head Submersible Sump Pumps

    Cable with an epoxy resin sealed water-proof cable hood.Use deep groove C3 bearing to extend life span. Use dual mechanical seals which is better sealed effect and better water proof structure that can increase product life span. Special impeller design which increases performance and efficiency. It is suitable for high head requirement ...

    By C & M Electric Actuators based in Taipei, TAIWAN. from Submersible Pumps Product line

  • Model VT Series - Vertical Line-Shaft Turbine Pump

    VT series – Vertical Line-shaft Turbine Pump, The water-lubricated line shaft and column assembly provides a connection between the head and pump bowls. The line shaft transfers the power from the motor to the impellers and the column carries the water to the surface. The pumps are adapted for use in cased wells or where the water surface is ...

    By U-Flo Pumps International LLC. based in Seattle, WASHINGTON (USA). from Deepwell Pumps Product line

  • Direct Action TARA Handpump

    This handpumps is designed by UNICEF are for lifting water from borewells with static water level not exceeding 15m. They are more cost-effective than other pumps for medium lifts (upto 15 m) and are safe from bacteriological contamination since all underground parts are made of non-corrosive materials like PVC or Stainless Steel. Cheaper than ...

    By Shree S.K. Industries based in Patna, INDIA. from Hand Pumps Product line

  • Vertical Turbine Pumps (VTP)

    Capacities up to 40,000 gpm (7,500 m3/h). Head up to 1,200 Feet (400 m). Power through 2000 hp (1500 kW). Pressures up to 590 psi (4,067 kPa).Frequency 50/60 Hz.   Temperatures to 400 °F (200°C).Bowls s from 8' to 40'.Versatility is one of the main characteristics of NEPTUNO PUMPS® VTP: flanged bowl construction, single or ...

    By Neptuno Fluid Technology Lid based in Iquique, CHILE. from Vertical Pumps Product line

  • Vertical Turbine Pumps (VTP) Enclosed Shaft

    Capacities up to 40,000 gpm (7,500 m3/h).Head up to 1,200 Feet (400 m).Power through 2000 hp (1500 kW).Pressures up to 590 psi (4,067 kPa).Frequency 50/60 Hz.Temperatures to 400 °F (200°C).Bowls s from 8' to 40'

    By Neptuno Fluid Technology Lid based in Iquique, CHILE. from Vertical Pumps Product line

  • Peripheral Pump

    QB peripheral pump is mainly composed of motor, water pump and sealing parts. The motor is single phase asynchronous type, and the brass impeller has peripheral structure. The single mechanical seal using ceramic/graphite/nitrile butadiene rubber works as the motive seal, and oil resistant rubber ring is used as the static seal for rabbet.This ...

    By Shimge Pump Industry Group Co.,Ltd. based in Wenling City, CHINA. from Surface Pump Product line

  • POWERPUMP - Model 2 - Manual & Automated Pump Actuators

    This actuator is an excellent choice for those with extreme pumping requirements.The Waterra PowerPump-2 is the most powerful pump actuator manufactured by Waterra. A Honda GX100, 3 horsepower, 4 stroke, gasoline motor powers this device.This actuator generates a 6 inch stroke and can operate both the Standard Flow System and High Flow System to ...

    By Waterra USA Inc. based in Peshatin, WASHINGTON (USA). from Inertial Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you