Magnetically coupled internal gear pumps for ultimate protection against leakage. As only minimal maintenance is necessary, ED pumps will be a very economical solution compared with traditionally sealed pumps, especially where the application requires the use of double mechanical shaft seals. Often these applications are very arduous resulting in ...
Pumps in cast iron, for clean, non-abrasive liquids. The simple and compact construction makes it a low-cost pump, often used in modified versions by OEM customers. A close-coupled OEM model is also available. GP pumps are designed for use with IEC or NEMA flange motors. Available with 90° angular configuration.
Internal gear pumps in cast iron, for a wide range of viscous, non-corrosive liquids. HD pumps are specifically designed for difficult applications and those involving high viscosity liquids. HD pumps are known by their sturdy and simple construction. Available with 90° angular configuration.
For high end applications, high prozess efficiency and quality: up to 25 bar (max. 120 bar), from -60°C to 450°C, 1 to 5.000 l/min 0,06 to 300 m3/h, up to 3000 U/min, Materials: all available materials, Seals: sealing ring, packing, single or double mechanical seal, relieved mechanical seal,magnetic coupling.
For high end applications, high prozess efficiency and quality, up to 25bar (max 120 bar), from -60°C to 450°C, 0,4 to 300 l/min 0,25 to 18 m3/h, up to 3000 U/min. Materials: all available materials. Seals: sealing ring, packing, single or double mechanical seal, relieved mechanical seal, magnetic coupling.
Series ‘К’ gear pumps are manufactured with thru-bolt body of rolled aluminium, usage of solid sleeves of high-strength aluminium alloy and PTFE bearings. Gear pumps series ‘К’ are manufactured under the standard DIN, SAE.
Displacement - 34...100 cm3.Rated pressure - 18-28 MPa (180-280 bar).Max. rotational speed - 1800-2800 rpm.SeriesT gear pumps are manufactured with installation dimensions according to ISO standard. May be of right, left and bidirectional rotation.The main characteristic of these pumps is low sensitivity to axial and radial loads which permits to ...
For standard applications: up to 20 bar, from -20°C to 120°C, 0,14 to 2.283 l/min 0,008 to 137 m3/h, up to 3000 U/min. Materials: stainless steel, hastelloy, grey cast iron, cast iron, ductile iron. Seals: sealing ring, packing, single or double mechanical seal.
Externally splined displacement pump. Media Oil / fuels -20 – +80 °C. Motor 120 W, 1~Mot / 3~Mot / EC. Material design. Stainless steel. Suction connection G 1/8. Pressure connection G 1/8. Sealing Separating can / Magnetic drive. Dimensions (WHD) 106 x 145 x 255–264 mm
Pompe Cucchi has realized this new gear pumps series obtained by dye casting in view of achieving pumps of a very high quality with a total absence of fusion defects and with perfect surface finishing not obtainable from the traditional fusion. The construction of this series is conformed with ATEX 24/9/CE - CE 89/392, 91/368, 93/44/68, 98/37 ...