gear pump Equipment available in Alabama

Available in Alabama| Near Alabama
262 Results found

We couldn't find any gear pump equipment in Alabama

Here is a list of results available in Alabama

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pumps ×

  • Keyword: gear pump ×

  • Available in: USA ×

  • Available in: Alabama ×

DESMI ROTAN - Model ED - Internal Gear Pumps

by DESMI A/S     based in Noerresundby, DENMARK

Magnetically coupled internal gear pumps for ultimate protection against leakage. As only minimal maintenance is necessary, ED pumps will be a very economical solution compared with traditionally sealed pumps, especially where the application requires the use of double mechanical shaft seals. Often these applications are very arduous resulting in ...

DESMI ROTAN - Model CC - Close-Coupled Internal Gear Pumps

by DESMI A/S     based in Noerresundby, DENMARK

Close-coupled internal gear pumps in cast iron, designed for the refrigerator industry. CC pumps are available from size 27 up to size 42.

DESMI ROTAN - Model HD - Heavy Duty Internal Gear Pumps

by DESMI A/S     based in Noerresundby, DENMARK

Internal gear pumps in cast iron, for a wide range of viscous, non-corrosive liquids. HD pumps are specifically designed for difficult applications and those involving high viscosity liquids. HD pumps are known by their sturdy and simple construction. Available with 90° angular configuration.

Rotan - Model GP Series - General Purpose Internal Gear Pumps

by DESMI A/S     based in Noerresundby, DENMARK

Pumps in cast iron, for clean, non-abrasive liquids. The simple and compact construction makes it a low-cost pump, often used in modified versions by OEM customers. A close-coupled OEM model is also available. GP pumps are designed for use with IEC or NEMA flange motors. Available with 90° angular configuration.

Model ZH/ZV BLUE Series - Gear Pumps

by ASM DIMATEC Deutschland GmbH     based in Wolfsburg, GERMANY

For high end applications, high prozess efficiency and quality: up to 25 bar (max. 120 bar), from -60°C to 450°C, 1 to 5.000 l/min 0,06 to 300 m3/h, up to 3000 U/min, Materials: all available materials, Seals: sealing ring, packing, single or double mechanical seal, relieved mechanical seal,magnetic coupling.

Micro PRO - Gear Pump

by PROCON Products     based in Smyrna, TENNESSEE (USA)

Primary Application: Espresso/Coffee. Secondary Application: Industrial Applications. Additional Applications: Carbonatation, Espresso/Coffee, Welding, Cold Carb Circulation, Reverse Osmosis, Beer Chillers, Pesticide Systems, Solar Applications . Mounting Style: Integrated Pump & Motor

Model ZK Blue Series - Gear Pumps

by ASM DIMATEC Deutschland GmbH     based in Wolfsburg, GERMANY

For high end applications, high prozess efficiency and quality, up to 25bar (max 120 bar), from -60°C to 450°C, 0,4 to 300 l/min 0,25 to 18 m3/h, up to 3000 U/min. Materials: all available materials. Seals: sealing ring, packing, single or double mechanical seal, relieved mechanical seal, magnetic coupling.

Roper - Model A Series - Gear Pump

by Roper Pump Company     based in Commerce, GEORGIA (US) (USA)

Geared for top performance, Roper Pumps 'A' Series keep your operation moving through thick and thin.

Roper - Model 2835 Series - Gear Pumps

by Roper Pump Company     based in Commerce, GEORGIA (US) (USA)

2835 Series Gear Pumps When the going gets thick, this pump gets going, count on it every time.

Hydrosila - Model GP1 10K - Gear Pump

by Trading House Hydrosila, JSC     based in Kirovohrad, UKRAINE

Series ‘К’ gear pumps are manufactured with thru-bolt body of rolled aluminium, usage of solid sleeves of high-strength aluminium alloy and PTFE bearings. Gear pumps series ‘К’ are manufactured under the standard DIN, SAE.

Model PQ Green Series - Gear Pumps

by ASM DIMATEC Deutschland GmbH     based in Wolfsburg, GERMANY

For standard applications: up to 20 bar, from -20°C to 120°C, 0,14 to 2.283 l/min 0,008 to 137 m3/h, up to 3000 U/min. Materials: stainless steel, hastelloy, grey cast iron, cast iron, ductile iron.  Seals: sealing ring, packing, single or double mechanical seal.

Hydrosila - Model Series T - Gear Pumps

by Trading House Hydrosila, JSC     based in Kirovohrad, UKRAINE

Displacement - 34...100 cm3.Rated pressure - 18-28 MPa (180-280 bar).Max. rotational speed - 1800-2800 rpm.SeriesT gear pumps are manufactured with installation dimensions according to ISO standard. May be of right, left and bidirectional rotation.The main characteristic of these pumps is low sensitivity to axial and radial loads which permits to ...

EDNA - Model 20 Series - Gear Pumps

by KAZEL     based in TURKEY

Inlet Pressure 0.7 ÷ 3 bar.Operating Viscosity Range -12:100 cSt.Fluid Temperature -10°C +80°C.

Roper - Model F Series - Gear Pump

by Roper Pump Company     based in Commerce, GEORGIA (US) (USA)

Roper Pumps 'F' Series gives you eight great ways to deliver under pressure.

Pompe Cucchi - Model MX series - Gear Pump

by Pompe Cucchi Srl     based in Opera, (Milano), ITALY

Pompe Cucchi has realized this new gear pumps series obtained by dye casting in view of achieving pumps of a very high quality with a total absence of fusion defects and with perfect surface finishing not obtainable from the traditional fusion. The construction of this series is conformed with ATEX 24/9/CE - CE 89/392, 91/368, 93/44/68, 98/37 ...

Model WP series - Gear Pump

by Pompe Cucchi Srl     based in Opera, (Milano), ITALY

Gear pump WP series has been created in order to solve transfer and dosage problems of non lubricant and low viscosity liquids.The construction of this series of gear pumps meets the regulations of the directive 2006/42CE and of the standards EN ISO 12100, EN 809, and has the certification GOST-R. Executions on request in accordance with Directive ...

Kracht - Model Type: KF2/40 E10B POA 0DP1 - Gear Pump

by All Spares Ltd     based in Bolton, UNITED KINGDOM

Kracht - Gear Pump - Type: KF2/40 E10B POA 0DP1. Vg:40cm.

DuroTec - Model KP 1 - Gear Pumps

by KRACHT GmbH     based in Werdohl, GERMANY

DuroTec gear pumps KP 1 for abrasive and poor lubricating fluids. The limit of applications of transfer gear pumps has been reached when the transfer medium does not have the required lubricity for a proper function of the pump and a high working pressure is needed at the same time. Such problematic fluids are for example silicates (sodium ...

DuroTec - Model DT 5 - Gear Pumps

by KRACHT GmbH     based in Werdohl, GERMANY

DuroTec Gear Pumps DT 5 for abrasive and poor lubricating fluids. In the year 1990, KRACHT initiated the development of Gear Pumps for abrasive and poor lubricating fluids. Since then, this development has been subsequently improved. The limit of applications of Gear Pumps has been reached when the transfer medium does not have the required ...

Gear Pump

by Colfax Corporation     based in Richmond, VIRGINIA (USA)

Gear pumps, such as the Crescent Internal Gear (CIG) Pump by Imo, are fixed-displacement pumps used mainly in hydraulic power applications as well as other more specialized applications like aircraft fuel test stands. Gear pumps can be engineered with multiple stages for very high pressure or moderate pressure on very low viscosity fuels.

Need help finding the right suppliers?

Let the XPRTs do the work for you