high pressure pump Equipment in Washington

  • High Pressure Pumps

    Ideal Usage: Industrial water blasting, pipeline pigging, irrigation, standby fire protection, environmental cleanups.

    By BakerCorp Office in Everett, WASHINGTON (USA). from Pumps Product line

  • Nuvair Mini Tech - Model MCH16 / 9 - Air Compressor

    Set up for a wide variety of applications in both breathing air and industrial air use. Compact design and fold away handles make for easy lifting and portability. The Nuvair Mini Tech Air Compressor uses a pumping unit that is made from top quality materials; connecting rods from aluminum alloy, stainless steel intercoolers and aftercoolers that ...

    By Dive Commercial International based in Seattle, WASHINGTON (USA). from High Pressure Product line

  • Moyno - Sanitary High Pressure Pumps

    The Sanitary High Pressure Pump features a rugged, field proven design modeled after the heavy-duty, 2000 Series Pump. Its low maintenance design and extended performance envelope make it ideal for handling high flow rates, high pressures and high viscosities.

    By Moyno, Inc. Distributor in Tacoma, WASHINGTON (USA). from Sanitary Pumps Product line

  • Self Priming Pumps

    Ideal Usage: Refineries, chemical facilities, waste water treatment plants, construction site dewatering.

    By BakerCorp Office in Everett, WASHINGTON (USA). from Pumps Product line

  • Landa - Model HOT Series - Hot Water Pressure Washer Line

    The HOT is the most economical choice of Landa's electric-powered, diesel-heated hot water pressure washers featuring the heat-efficient horizontal coil. It is also the only line among those with a horizontal coil design that has a true steam cleaner, or steamer—the HOT3-30036D. The HOT boasts many of the same quality components of Landa ...

    By Landa based in Camas, WASHINGTON (USA). from Hot Water Pressure Washers Product line

  • Landa - Model PHW Series - Hot Water Pressure Washer Line

    For nearly three decades, the PHW has been the flagship of the Landa hot water pressure washer line. The PHW is heated by diesel or fuel oil using a high-efficiency burner. Other quality features include heating coil made of Schedule 80 steel pipe; top-of-the-line, low-RPM, belt-drive, tri-plunger Landa pump with U-seals and 7-year warranty; ...

    By Landa based in Camas, WASHINGTON (USA). from Hot Water Pressure Washers Product line

  • Model VP Series - Stainless Casting Deep-Well Submersible Pump

    VP Series - Stainless casting deep-well submersible pump, all parts contacted with liquid are made of stainless steel. It is widely used in water reverse osmosis systems and water works, high rise building boosting applications, process water system, high pressure washing systems, mining/ marine, ground water pumping applications, fire systems.

    By U-Flo Pumps International LLC. based in Seattle, WASHINGTON (USA). from Deepwell Pumps Product line

  • Model D-13 - Plastic Valve

    The Low Flow System is designed to be used in small diameter piezometers (usually 1.5' ID to 0.75' ID). It can provide flow rates of up to 1/2 gallon per minute and can lift water from up to 100 feet. This system consists of a low flow valve, either the acetal plastic D-13 foot valve or the stainless steel SS-13 foot valve and HDPE, LDPE or FEP ...

    By Waterra USA Inc. based in Bellingham, WASHINGTON (USA). from Inertial Pumps Product line

  • MAX RGT - Regenerative Turbine Pump

    The MAX RGT pumps are built to give superior service and high reliability at an economical price. Each pump model is built with an easy service design for low maintenance and long life. With efficient hydraulics, tuned impellers and exacting blade profiles the MAX RGT can generate up to a twenty percent gas to liquid dissolution ratio.

    By Rogue Pump Company, LLC based in Camas, WASHINGTON (USA).

  • Imo Pump - Model Series 6U/6T - Three Screw Pumps

    The 6U series pump is intended primarily as a high pressure fluid power pump. It is available foot or flange mounted and is suitable for cyclic pressure service. The 6T series is produced in a cast steel casing with a combined foot/flange mounting arrangement. The pump is primarily used for medium pressure gas sealing applications on compressors.

    By Imo Pump Distributor in Tacoma, WASHINGTON (USA). from 3-Screw Pumps Product line

  • Imo Pump - Model Series 4SFC - Three Screw Pumps

    The 4SFC series pump is intended primarily as a medium pressure fluid power pump. It is available foot or flange mounted.

    By Imo Pump Distributor in Tacoma, WASHINGTON (USA). from 3-Screw Pumps Product line

  • Imo Pump - Model Series 4KVC - Three Screw Pumps

    The 4VKC series pump is intended primarily as a medium pressure fluid power pump. It is available foot or flange mounted.

    By Imo Pump Distributor in Tacoma, WASHINGTON (USA). from 3-Screw Pumps Product line

  • Imo Pump - Model Series 12D - Three Screw Pumps

    Series 12D Imo pumps are intended for relatively high pressure service on petroleum or similar viscosity liquids. Typical applications include crude oil pipeline service, fuel atomization for burning in a steam boiler, fuel injection for combustion gas turbines, fluid power service on hydraulically operated machinery, gas sealing in centrifugal ...

    By Imo Pump Distributor in Tacoma, WASHINGTON (USA). from 3-Screw Pumps Product line

  • Premium

    AutoPump - Air-Powered Remediation Pumps for Landfill Pumping

    AutoPump Automatic Air-Powered Remediation and Leachate & Methane Condensate Pumps. QED’s AutoPumps originated the automatic air-powered pump concept in 1986 and has led the industry ever since. AutoPumps were designed specifically to handle difficult conditions reliably and safely, including hydrocarbon (LNAPL and dissolved phase) ...

    By QED Environmental Systems Distributor in WASHINGTON (USA). from Groundwater Remediation Pumping Product line

  • Premium

    AutoPump - Model AP4Plus - Landfill and Remediation Pumping

    The AP4+ was made easier to clean by using 3 bolts to attach the pump inlet and open up the pump. This is easier than having to rotate the inlet multiple turns to unthread it from the center tube inside the pump, especially under field conditions of silt, deposits and coatings. Removing the inlet is also aided by the new, precision ID pump casing, ...

    By QED Environmental Systems Distributor in WASHINGTON (USA). from Groundwater Remediation Pumping Product line

  • STIHL - Model RE 98 - Entry Level Cold Water High Pressure Cleaner

    The RE 98 is the entry-level, handy cold water high pressure cleaner. Ergonomically-optimised design. Includes hose and power cable brackets, rotary and fan jet nozzles, detergent spray set and an easy maintenance pump.

    By STIHL Group Distributor in Puyallup, WASHINGTON (USA). from Pressure Washers and Vacuums Product line

  • Peerless - Model TU/TUT Series - Horizontal Split Case Multi-Stage Pumps

    The Peerless TU or TUT pump is a cast iron, bronze-fitted, multi stage, horizontal split case design. Type TU pumps are 2 stage design, while TUT pumps are 3,4, and 5 stage. Engineered and manufactured, there are 35 pump sizesranging from one and one half-inch to ten-inch discharge.

    By Peerless Pump Company Distributor in WASHINGTON (USA). from Horizontal Pumps Product line

  • Model B-1400 - TU/TUT Multi-Stage Horizontal Split Case Pumps

    The Peerless TU or TUT pump is a cast iron, bronze-fitted, multi stage, horizontal split case design. Type TU pumps are 2 stage design, while TUT pumps are 3, 4, and 5 stage. Engineered and manufactured, there are 35 pump sizes ranging from one and one half-inch to ten-inch discharge.

    By Peerless Pump Company Distributor in WASHINGTON (USA). from Horizontal Pumps Product line

  • Monkey - Hot Water Heater System

    The new Monkey Heater unit is smaller and lighter than previous models, incorporating a number of features including detachable fuel tanks, that make fuel transfer a breeze. Standard on every system is a small, submersible water pump (eliminating pump-priming difficulties) that moves up to eleven gallons of water per minute. The pump comes with a ...

    By Dive Commercial International based in Seattle, WASHINGTON (USA). from Hot Water Product line

  • Model Series 4U/4T - Three Screw Pumps

    The 4U series pump is intended primarily as a medium pressure fluid power pump. It is available foot or flange mounted and is suitable for cyclic pressure service. The 4T series is produced in a cast steel casing with a combined foot/flange mounting arrangement. The pump is primarily used for medium pressure gas sealing applications on ...

    By Imo Pump Distributor in Tacoma, WASHINGTON (USA). from 3-Screw Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you