We couldn't find any impeller pump equipment suppliers or service providers located in Benin

Here is a list of equipment results with suppliers serving Benin

Impeller Pump (Water and Wastewater Pumps) equipment available in Benin

  • Premium

    Landustrie LANDY - Closed Screw Centrifugal Impeller Pumps

    Our LANDY closed screw impeller pumps are ideally suited for situations where power consumption is an important issue. This type of impeller is the new generation single channel impeller performing with high efficiency and good non-clogging performance.

    By Landustrie Sneek BV based in Sneek, NETHERLANDS. from Pumping Product line

  • Chemineer - Model RL-3 - Impeller Pump

    The Chemineer RL-3 impeller is designed for applications where a ragless agitator is desired to prevent fibrous material build-up on the rotating impeller. Typical in Waste Treatment applications the RL-3 is a rag shedding impeller which prevents build-up of fibrous materials on the impeller, while providing a strong axial flow for efficient ...

    By National Oilwell Varco based in Dayton, OHIO (USA). from Impellers Product line

  • Chemineer - Model JT-2 - Impeller Pump

    The JT-2 Impeller has been developed for superior blending in transitional flow. Higher viscosity and non-Newtonian fluids make blending much more challenging. This impeller is used after conventional turbines have lost efficiency due to viscous effects and before the need for close clearance impellers.

    By National Oilwell Varco based in Dayton, OHIO (USA). from Impellers Product line

  • Chemineer Impeller - Model P-4 - Impeller Pump

    A reasonably cost effective impeller in both turbulent and laminar flow. Good impeller for applications where the viscosity changes over a wide range causing the flow regime to vary between turbulent and laminar flow. A reasonably cost effective impeller for solids suspension.

    By National Oilwell Varco based in Dayton, OHIO (USA). from Impellers Product line

  • Chemineer - Model S-4 - Impeller Pump

    A cost effective impeller for operation very near the floor of a tank for agitating the heel in solids suspension applications. Also an effective impeller in laminar flow applications, especially when impeller Reynolds numbers drop below 50.

    By National Oilwell Varco based in Dayton, OHIO (USA). from Impellers Product line

  • Chemineer - Model SC-3 - High Efficiency Impeller Pump

    The Chemineer® SC-3 Impeller features an advanced design engineered for deep tanks. It produces flow characteristics of much larger impellers, without the added weight, or the resulting loss in pumping efficiency. The highly efficient SC-3 Impeller's reduced weight allows for the use of longer shaft extensions for deeper tanks, and resolves ...

    By National Oilwell Varco based in Dayton, OHIO (USA). from Impellers Product line

  • Chemineer - Model CD-6 - Concave Impeller Pump

    The CD-6 impeller is a second generation gas and immiscible liquid dispersion impeller. The CD-6 can handle about 2.4 times the maximum gas capacity of the D-6 impeller. The CD-6 is similar to the Smith impeller, but there are substantial power and dispersion capability differences. This impeller has been used at aeration numbers as high as 2.1.

    By National Oilwell Varco based in Dayton, OHIO (USA). from Impellers Product line

  • Chemineer - Model XE-3 - High Efficiency Impeller Pump

    The highest efficiency turbulent flow impeller available in the marketplace. Ideal for blending, heat transfer, and solids suspension applications. Developed to maximize strength at lower weights as compared to other axial flow impellers, allowing for longer shafts without internal support, smaller shaft diameters, and smaller seal sizes if ...

    By National Oilwell Varco based in Dayton, OHIO (USA). from Impellers Product line

  • Chemineer - Model HE-3 - High-Efficiency Impeller Pump

    An extremely efficient turbulent flow impeller for blending, heat transfer and solids suspension. Most effective for Reynolds numbers over 50. Developed to minimize the creation of trailing vortices and incorporating the otherwise wasted energy into macro-flow.

    By National Oilwell Varco based in Dayton, OHIO (USA). from Impellers Product line

  • Prochem Maxflo - Model Mark II & III - Impeller Pumps

    High efficiency, high solidity impellers for use in turbulent side entering applications. They are especially effective for fluids possessing a yield value, such as paper stock. The high solidity permits operation nearer the boiling point without cavitation.

    By National Oilwell Varco based in Dayton, OHIO (USA). from Prochem Product line

  • Johnson Pump - Model DC - Multipurpose Flexible Bronze Impeller Pump

    Multipurpose flexible bronze impeller pump for battery operated applications. These impeller 12/24 V DC close-coupled pumps are ideal for battery operated applications. The series comprises six models – five in bronze and one in a thermoplastic material and they cover flows from 15 to 55 l/min. The F3B-19 Oil change is a reversible rubber ...

    By Johnson Pump - an SPX Corporation brand based in ÖREBRO, SWEDEN. from Flexible Impeller Pumps Product line

  • Model RV - Helicoidal Impeller Pump

    The RV centrifugal pump with helicoidal impeller is the best solution for the transfer of liquids with solid particles or medium viscosity products that cannot be pumped with an ordinary centrifugal pump. Due to the helicoidal shape of the impeller, the transfer of the product is gentle and without clogging., e.g. solid particles suspended in ...

    By INOXPA based in Banyoles, SPAIN. from Pumps Product line

  • Model PLN 618 - 6` Plastic Impeller Pump

    Max. Sand Content 40 gr/ m3. Frequency 50 Hz. Rotation CCW. Rotational Speed 2900 rpm. Max. VVater Temp. 30°C. Max. Start / Hour 4' - 10 / 6' - 20.

    By Polmot Motor Mak.San. ve Tic. A.S. based in Selcuklu /Konya, TURKEY. from Plastic Impeller Pumps Product line

  • Model PLN 403 - 4` Plastic Impeller Pump

    Max. Sand Content: 50 gr/ m3. Frequency: 50 Hz. Rotation: CCW. Rotational Speed: 2900 rpm. Max. VVater Temp.: 30°C. Max. Start / Hour: 4' -10.

    By Polmot Motor Mak.San. ve Tic. A.S. based in Selcuklu /Konya, TURKEY. from Plastic Impeller Pumps Product line

  • Model AD ADVANCE SERIES - Flexible Impeller Pumps

    The impeller, deforming itself inside the stainless steel body pump, ensures a quick suction up to 6 meters and a continuous and delicate transfer of the liquid to the outlet. Besides, the low revolution speed makes it suited for trasferring delicated and fragile liquids, and fluids with suspension solids. The pump runs in both rotation directions ...

    By Alphadynamic Pumps Co based in Kifisia, GREECE. from Flexible Impeller Pumps Product line

  • UNISTAR - Model 2000 - Impeller Pump with Drive

    A multi-purpose pump designed for transferring clean or contaminated fluids without abrasive particles (suitable for all non corrosive and non abrasive fluids).

    By ZUWA-Zumpe GmbH based in Laufen, GERMANY. from Flexible Impeller Pumps Product line

  • Flexible Impeller Pumps

    The flexible impeller pump is self priming, reversible, compact and efficient also at low rpm. With its simple operation has an easy installation  and maintenance, is suitable for a variety of application and has no pulse. It  can be flanged, 2-speed and optional (variable speed, inverter and other on-demand).

    By Nova Rotors srl based in Sossano VI, ITALY. from Flexible Impeller Pumps Product line

  • STAC - Model CR Series - Centrifugal Open Impeller Pumps

    The open impeller allow pumping of clean or relatively dirty water which have solid parts with diameter maximum of 8 mm.

    By STAC s.r.l. based in Trieste, ITALY. from Surface Centrifugal Cast Iron Made Electric Pumps Product line

  • ECO IMPELLER PUMP SC03

    This model is designed for pumping jobs such as construction sites and manhole pumping where lightweight, high volume, trash pumps are needed. It has the ability to pass through a 12' opening and pump in debris laden areas. A small hole strainer is available for limiting solids to be pumped. Discharge hole 3' and solids handling 2 1/2'. Its ...

    By Eco Equipments Inc. based in Taipei, TAIWAN.

  • ECO IMPELLER PUMP SC02

    This is a very portable and versatile all purpose submersible utility pump. An efficient channel impeller handles solids and offers excellent overall performance. This pump is available with your choice of water or solids handling strainers. Its max. capacity is 750 liters/minute and max. head is 40 meters. Solids Handling is about 25mm.

    By Eco Equipments Inc. based in Taipei, TAIWAN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you