recirculation pump Equipment available in Saudi Arabia

Available in Saudi Arabia| Near Saudi Arabia
92 Results found

We couldn't find any recirculation pump equipment in Saudi Arabia

Here is a list of results available in Saudi Arabia

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pumps ×

  • Keyword: recirculation pump ×

  • Available in: Asia & Middle East ×

  • Available in: Saudi Arabia ×

Landia - Model AXD-I 300 - Recirculation Pump

by Landia     based in Lem, DENMARK

Submersible axial pump for waste water treatment plants and industry: Four motor sizes from 1.5 to 4.0 kW. Capacity up to approx. 800 m³/hour. Pipe diameter 300 mm.

Model MXN - Recirculation Pumps

by SCM Tecnologie     based in San Giorgio, ITALY

The MXN series recirculation pumps are based on the same principle of the MX-gi/ii series. The recirculation pumps are used to transfer large volumes of water from adjoining tanks in presence of average (not high) head values.

BÜCHI - Model F-125 - Recirculating Chiller

by BÜCHI Labortechnik AG     based in Postfach, SWITZERLAND

Make your R-220 SE independent of supply lines. Chiller, Rotavapor R-220 SE and vacuum pump from one compact unit, hosted on a trolley. Optimal for one or multiple units.

Model Type ABS XRCP - Submersible Recirculation Pump

by Sulzer     based in Winterthur, SWITZERLAND

The XRCP is specifically designed for pumping and recirculation of activated sludge in the denitrification/nitrification process of a wastewater treatment plants. This compact and easy-to-handle pump is efficient and reliable.

Dry Pit Recirculation Pumps

by Mixing Systems, Inc.     based in Dayton, OHIO (USA)

One of twenty-two 75 HP Goulds pumps. Pump for a food processing plant Goulds pump for a food processing plant. Goulds pump One of three Goulds dry pit pumps used for an oxidation ditch. 75 hp Goulds pump One of seven 75 HP Goulds pumps. Fairbanks morse pump Fairbanks Morse centrifugal pump. 60 HP pump One of ten 60 HP pumps. 5 HP pump One of two ...

SludgeHammer - Model S-RCP-1-FC - 1″ Recirculation Pump

by SludgeHammer Group, Ltd.     based in Petoskey, MICHIGAN (USA)

Recirculates without any moving parts. Provides increased mixing in the tank by moving large amounts of effluent from chamber to chamber or tankto tank. The SludgeHammer Airlift pumps operate on the principle of air displacement of liquid within the pumps vertical riser. The pump operates with pressurized air that forms a bubble within a ...

Liquid Recirculation Pumps

by Mass Transfer Systems (MTS)     based in Walpole, MASSACHUSETTS (USA)

Mass Transfer Systems offers a variety of liquid recirculation pumps, from dry pit centrifugal to wet installed submersible to dry pit installed submersible. We can provide the pumps as part of our package or we can provide technical assistance in the selection of the best fit pump for the system.

Landia - Model AXP-I 500 - Recirculation Axial Pump

by Landia     based in Lem, DENMARK

Submersible axial pump for waste water treatment plants and industry: Six motor sizes from 2.2 to 11.0 kW. Capacity up to approx. 2900 m³/hour. Pipe diameter 500 mm.

Landia - Model AXP-I 800 - Recirculation Axial Pump

by Landia     based in Lem, DENMARK

Submersible axial pump for waste water treatment plants and industry: Four motor sizes from 7.5 to 18.0 kW. Capacity up to approx. 5000 m³/hour. Pipe diameter 800 mm.

Recirculator Wet Well Pump

by Vaughan Company., Inc.     based in Montesano, WASHINGTON (USA)

Easy above-deck access to valve and nozzle operators. Manual or fully automated operation available. Recirculation feat ure also mailable with Horizontal and Self-priming configurations

Chemineer - Model JT-2 - Impeller Pump

by National Oilwell Varco     based in Dayton, OHIO (USA)

The JT-2 Impeller has been developed for superior blending in transitional flow. Higher viscosity and non-Newtonian fluids make blending much more challenging. This impeller is used after conventional turbines have lost efficiency due to viscous effects and before the need for close clearance impellers.

Model TDL - Automatic Recirculation Valve

by Schroedahl GmbH     based in Reichshof-Mittelagger, GERMANY

The SCHROEDAHL Automatic Recirculation Valve is used as a pump protection system for centrifugal pumps. The TDL consists of the check valve section (Fig. 3) with bypass configuration type L (Fig. 4). The lever controls the position of the bushing, which in turn opens less wide the holes in the control head. The minimum flow is thereby bypassed in ...

Model MRM - Automatic Recirculation Valve

by Schroedahl GmbH     based in Reichshof-Mittelagger, GERMANY

The ultimate high pressure SCHROEDAHL Automatic Recirculation Valve, type MRK and MRM, is used as a pump protection system for centrifugal pumps for water applications

Model SUL - Automatic Recirculation Valve

by Schroedahl GmbH     based in Reichshof-Mittelagger, GERMANY

Modern processing industry often requires centrifugal pumps to operate with fluctuating flows. This is because of automated control of such processes. When flows are too low in centrifugal pumps, however, this may result in overheating and lead to damage or cause unstable operation. It is important that flows through a pump do not fall below a ...

Model TDM - Automatic Recirculation Valve

by Schroedahl GmbH     based in Reichshof-Mittelagger, GERMANY

The SCHROEDAHL Automatic Recirculation Valve is a high quality automatic solution to protect centrifugal pumps against overheating, excessive noise, instability and cavitation, during zero process flow and low load conditions. It works, if the flow through the system is, or falls below a certain level, so that the bypass system opens automatically ...

Model TDC - Automatic Recirculation Valves

by Schroedahl GmbH     based in Reichshof-Mittelagger, GERMANY

Automatic Recirculation Valves protect centrifugal pumps against overheating, excessive noise, instability and cavitation during low flow conditions. The main flow positions the check valve at a certain point. The stem of the check valve transmits the motion via a lever to the bypass. The bypass system controls the bypass flow in a modulating way ...

Verderflex - Dura 55 Peristaltic Industrial Hose Pumps

by Verderflex Peristaltic Pumps - part of the Verder Group     based in Castleford, UNITED KINGDOM

The Verderflex Dura 55 is the class leader for this size of peristaltic pump, significantly outperforming its competitors in both continuous and intermittent duty applications. 

Multiphase Pumps

by Leistritz Corporation     based in Allendale, NEW JERSEY (USA)

Conventional methods for producing oil and gas are successfully replaced by a simpler, more economic technology known as multiphase pumping. Multiphase pumping does not require separation of oil, gas, or water, so production from the field can be gathered and transported to a central processing area without requiring separate flow lines, ...

Levitronix - Model BPS-1 - Centrifugal Pump

by Levitronix GmbH     based in CH-8005, SWITZERLAND

Levitronix has developed a revolutionary centrifugal pump that has no bearings to wear out or seals to break. Based on the principles of magnetic levitation, the pump’s impeller is suspended contact-free inside a sealed casing and is driven by the magnetic field of the motor. The impeller and casing are both fabricated ...

Pump

by OMVE s.r.l.     based in Guastalla (RE), ITALY

Effluent Transfer and treatment pumps in the recirculation tank.

Related Terms for recirculation pump

Need help finding the right suppliers?

Let the XPRTs do the work for you