rotary lobe pump Equipment available in Andorra

Available in Andorra| Near Andorra
56 Results found

We couldn't find any rotary lobe pump equipment in Andorra

Here is a list of results available in Andorra

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pumps ×

  • Keyword: rotary lobe pump ×

  • Available in: Europe ×

  • Available in: Andorra ×

Albin - Model MG - Rotary Lobes Pump 2 to 25 m³/h - up to 5 bar

by Albin Pump SAS     based in Goteborg, SWEDEN

Specifications: Flow rate: 2 to 25 m 5/h. Discharge pressure: up to 5 bar. Suction lit: -5mCe. Suction / discharge: DN50-80. Body: IRON GG30. Lobes (bean): Cast IRON coated NBR-V1TON-PU-EPDM. Seal: Double radial seal, grease lubricated. Wearing plate: Galvanized steel. Motor: Motor IE2  1.5 to 5.5 Kw. Weight: 150 - 200 kg.

Albin - Model MG - Rotary Lobes Pump 90 to 300m³/h - up to 5 bar

by Albin Pump SAS     based in Goteborg, SWEDEN

Specifications: Flow rate: 90 to 300 m 3/h. Pressure discharge: up to 5 bar. Suction lift: -5mCe. Suction/ discharge: DN80-150. Body: IRON GG30. Lobes (bean): Cast IRON coated NBR-V1TON-PU-EPDM. Seal: Double radial seal, grease lubricated. Wearing plate: Galvanized steel. Motor: Motor IE2-IE3 11 - 55 Kw. Weight: 1225 -1365 kg.

Albin - Model MG - Rotary Lobes Pump 17 à 120 m³/h - jusqu`à 5 bar

by Albin Pump SAS     based in Goteborg, SWEDEN

Specifications: Flow rate: 17 to 120 m5/h. Discharge pressure: up to 5 bar. Suction lift: -5mCe. Suction/ discharge: DN80-150. Body: IRON GG30. Lobes (bean): Cast IRON coated NBR-V1TON-PU-EPDM. Seal: Double radial seal, grease lubricated. Wearing plate: Galvanized steel. Motor: Motor IE2-IE3 3 to 30 Kw. Weight: 295 - 595 kg.

HP Pumps - Rotary Lobe Pumps

by Hydro Prokav Pumps (India) Pvt. Ltd.     based in Sidco, INDIA

The principle of operation of our Rotary Lobe Pumps are two synchornized rotors (Lobes) rotating against each other build chambers towards the casing of the pump. At the suction side, the fluid enters the chambers and during rotation, the fluid is displaced in the direction of the volume flow in to the Discharge side.

Model K Green Series - Rotary Lobe Pumps

by ASM DIMATEC Deutschland GmbH     based in Wolfsburg, GERMANY

KH Blue Gear Pump ROTARY LOBE PUMPS: K GREEN Series For standard applications  0.4 to 23689 l/min 0. 024 m3/h to 1421m3/h piston set: E, S, DE and DS pumps: KE-Green, KS-Green, KDE-Green and KDS-Green up to 25 bar from -20°C to 120°C up to 400 RPM.materials: stainless steel, hastelloy, grey cast iron, cast iron, ductile iron.seals: ...

NETZSCH TORNADO - Rotary Lobe Pump

by NETZSCH Group     based in Selb, GERMANY

NETZSCH TORNADO® industrial rotary lobe pumps are versatile stand-alone equipment. Used primarily in environmental technology and the chemical industry, these pumps handle almost any substance continuously and gently while metering in proportion to rotation speed. Their small space requirements and high power density are some of their ...

Vogelsang - Model IQ112 - Rotary Lobe Pumps

by Vogelsang Ltd     based in Crewe, UNITED KINGDOM

Pumps in the IQ112 series are the ideal solution for when you need quick maintenance, cost-saving service, easy handling and maximum availability. With capacities of up to 77 m3/h and pressures up to 8 bar, this is the cost-effective and easy to maintain solution for difficult media such as primary sludge or media containing coarse matter (e.g. ...

Model RTP - Rotary Lobe Pump

by Wright Flow Technologies, Inc.     based in Cedar Falls, IOWA (USA)

Ideally suited for tanker application and installation. Machined to accept hydraulic motor. Bi-directional construction. Designed to maximise operational life with minimum maintenance. Low NPSH requirement. Standard 0.8μm Ra finish

Classic Plus - Multi Rotary Lobe Pumps

by Wright Flow Technologies, Inc.     based in Cedar Falls, IOWA (USA)

Ideally suited for a variety of hygienic processes. Standard 0.8|jm Ra finish.  Enhanced surface finishes available.  Hygienically designed

SteriLobe - Rotary Lobe Pumps

by Wright Flow Technologies, Inc.     based in Cedar Falls, IOWA (USA)

Ideally suited to both hygienic and industrial applications All seal combinations fully front loading and demountable. Standard 0.6 μm Ra finish. Pump fully self-draining (Vertical ports). Hygienic cover joint profile. Rugged gearbox construction enables the carrying of radial loads

Model IQ-Series - Rotary Lobe Pumps

by Hugo Vogelsang Maschinenbau GmbH     based in Essen Oldb., GERMANY

The concept for greater cost-effectiveness due to less maintenance and service. Rapid maintenance, cost-saving service and extremely simple handling make the rotary lobe pumps in the IQ-series one-of-a-kind. The number of core spare parts was halved compared to the conventional design. This reduces the cost of replacement parts. The IQ series ...

Model K Blue Series - Rotary Lobe Pumps

by ASM DIMATEC Deutschland GmbH     based in Wolfsburg, GERMANY

ROTARY LOBE PUMPS: K BLUE Series For high end applications, high prozess efficiency and quality.0.5 to 28548 l/min 0.030 m3/h bis 1713 m3/h piston set: E, S, DE and DS.pumps: KE-Blue, KS-Blue, KDE-Blue and KDS-Blue up to 64 bar from -60°C to 450°C up to 400 RPM.materials: all available materials.seals: sealing ring, packing, single or ...

Rotary Lobe Pump

by Bellin S.p.a     based in ORGIANO, ITALY

Easy maintenance - maintenance and cleaning on site: fast opening of the pump because of the possibility of removal of the front inspection cover without disturbing the pump housing or pipe work. Pump housing can be supplied with hard metal replaceable wearing plates at front and rear. they can be replaced easily on site.Possibility to handle ...

Megator - Rotary Lobe Pump

by Megator     based in Pittsburgh, PENNSYLVANIA (USA)

Serving Industrial, Municipal & Sanitary Industries. Pumping fluids that are highly viscous, abrasive, laden with solids or all of these things is the daily task for the Megator Lobe Pump. Due to a number of carefully engineered features, the Megator Rotary Lobe Pump manages such a task whilst ensuring a low life cycle cost. The gentle action ...

NETZSCH TORNADO - Mobile Rotary Lobe Pump

by NETZSCH Group     based in Selb, GERMANY

A TORNADO rotary lobe pump fastened onto a mobile base – this is the NETZSCH TORNADO Mobile. The concept of mounting the equipment onto a car or truck trailer makes it possible to pump large quantities of fluids with solid content, wastewater and slurries at the most unusual of sites. Based on the given application, a TORNADO rotary lobe ...

Model KM Blue Series - Rotary Lobe Pumps

by ASM DIMATEC Deutschland GmbH     based in Wolfsburg, GERMANY

For high end applications, high prozess efficiency and quality, 0,53 to 4046 l/min, 0,032 m3/h to 243 m3/h, piston set: M and M3, pumps: KM-Blue and KM3-Blue, up to 64 bar, from -60°C to 450°C, up to 400 RPM, materials: all available materials, seals: sealing ring, packing, single or double mechanical seal.

Model VX100 Series - Rotary Lobe Pumps

by Hugo Vogelsang Maschinenbau GmbH     based in Essen Oldb., GERMANY

Rotary lobe pumps in the VX100 series are used wherever you only need small capacities but you want the advantages of rotary lobe pumps from the VX series. With capacities of up to 50 m³/h and pressures up to 10 bar, this is the cost-effective and easy-to-maintain solution for a wide range of applications.

Acculobe - Rotary Lobe Pump

by Wright Flow Technologies, Inc.     based in Cedar Falls, IOWA (USA)

IEC or NEMA flange mounting options with integral geared speed reduction.Bulkhead fitted or Foot mounted.Hygienic front-loading seals.Standard 0.6m Ra finish

Concept - Model SQ Series - Rotary Lobe Pump

by Wright Flow Technologies, Inc.     based in Cedar Falls, IOWA (USA)

Ultra hygienic, ultra gentle product handling. The Concept SQ was designed by a team that envisioned a level of cleanliness only a handful of pumps may ever achieve. At its launch, we accomplished just that - it was deemed to be the cleanest pump ever built.

Börger - Rotary Lobe Pump

by Boerger GmbH     based in Borken-Weseke, GERMANY

Börger Rotary Lobe Pumps are self-priming, valveless, positive displacement pumps. The rotor ensures low-pulsation, gentle pumping and the flow rate is reversible by changing the direction of rotation. With a wide range of 20 pump sizes (rated capacity up to 1,000 m³/h (4,400 usgpm), a large selection of equipment and ...

Need help finding the right suppliers?

Let the XPRTs do the work for you