rotary lobe pump Equipment available in Saskatchewan

Available in Saskatchewan| Near Saskatchewan
55 Results found

We couldn't find any rotary lobe pump equipment in Saskatchewan

Here is a list of results available in Saskatchewan

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pumps ×

  • Keyword: rotary lobe pump ×

  • Available in: Canada ×

  • Available in: Saskatchewan ×

Albin - Model MG - Rotary Lobes Pump 90 to 300m³/h - up to 5 bar

by Albin Pump SAS     based in Goteborg, SWEDEN

Specifications: Flow rate: 90 to 300 m 3/h. Pressure discharge: up to 5 bar. Suction lift: -5mCe. Suction/ discharge: DN80-150. Body: IRON GG30. Lobes (bean): Cast IRON coated NBR-V1TON-PU-EPDM. Seal: Double radial seal, grease lubricated. Wearing plate: Galvanized steel. Motor: Motor IE2-IE3 11 - 55 Kw. Weight: 1225 -1365 kg.

Albin - Model MG - Rotary Lobes Pump 2 to 25 m³/h - up to 5 bar

by Albin Pump SAS     based in Goteborg, SWEDEN

Specifications: Flow rate: 2 to 25 m 5/h. Discharge pressure: up to 5 bar. Suction lit: -5mCe. Suction / discharge: DN50-80. Body: IRON GG30. Lobes (bean): Cast IRON coated NBR-V1TON-PU-EPDM. Seal: Double radial seal, grease lubricated. Wearing plate: Galvanized steel. Motor: Motor IE2  1.5 to 5.5 Kw. Weight: 150 - 200 kg.

Albin - Model MG - Rotary Lobes Pump 17 à 120 m³/h - jusqu`à 5 bar

by Albin Pump SAS     based in Goteborg, SWEDEN

Specifications: Flow rate: 17 to 120 m5/h. Discharge pressure: up to 5 bar. Suction lift: -5mCe. Suction/ discharge: DN80-150. Body: IRON GG30. Lobes (bean): Cast IRON coated NBR-V1TON-PU-EPDM. Seal: Double radial seal, grease lubricated. Wearing plate: Galvanized steel. Motor: Motor IE2-IE3 3 to 30 Kw. Weight: 295 - 595 kg.

HP Pumps - Rotary Lobe Pumps

by Hydro Prokav Pumps (India) Pvt. Ltd.     based in Sidco, INDIA

The principle of operation of our Rotary Lobe Pumps are two synchornized rotors (Lobes) rotating against each other build chambers towards the casing of the pump. At the suction side, the fluid enters the chambers and during rotation, the fluid is displaced in the direction of the volume flow in to the Discharge side.

Model RTP - Rotary Lobe Pump

by Wright Flow Technologies, Inc.     based in Cedar Falls, IOWA (USA)

Ideally suited for tanker application and installation. Machined to accept hydraulic motor. Bi-directional construction. Designed to maximise operational life with minimum maintenance. Low NPSH requirement. Standard 0.8μm Ra finish

Classic Plus - Multi Rotary Lobe Pumps

by Wright Flow Technologies, Inc.     based in Cedar Falls, IOWA (USA)

Ideally suited for a variety of hygienic processes. Standard 0.8|jm Ra finish.  Enhanced surface finishes available.  Hygienically designed

SteriLobe - Rotary Lobe Pumps

by Wright Flow Technologies, Inc.     based in Cedar Falls, IOWA (USA)

Ideally suited to both hygienic and industrial applications All seal combinations fully front loading and demountable. Standard 0.6 μm Ra finish. Pump fully self-draining (Vertical ports). Hygienic cover joint profile. Rugged gearbox construction enables the carrying of radial loads

Model IQ112 Series - Rotary Lobe Pump

by Vogelsang USA     based in Canby, OHIO (USA)

The all new IQ design works well in applications requiring a positive displacement pump up to 343gpm. All Vogelsang pumps can run dry without damage, self prime and run in forward or reverse. Vogelsang pumps are great for suction lift applications up to 25'. The IQ features our standard 4 wing HiFlo Lobe design, the pump ...

Model VX100QHD - Rotary Lobe Pump

by Vogelsang USA     based in Canby, OHIO (USA)

The VX100 Rotary Lobe Pump is ideal for applications requiring a high-performance positive displacement pump in an extremely small package. The VX100 is our smallest series pump but it packs more power than many larger pump designs. 

Model VX136Q - Rotary Lobe Pump

by Vogelsang USA     based in Canby, OHIO (USA)

The VX136 Series is one of our most frequently specified pump line. It offers a wide flow range starting at 45gpm up to 1220gpm. It can also be configured to handle pressure to 232psi. Choosing a VX136 for all of your pumping applications means you can reduce maintenance time and spare cost parts - since most of the parts are interchangeable ...

Model VX136QD - Rotary Lobe Pump

by Vogelsang USA     based in Canby, OHIO (USA)

The VX136 Series is one of our most frequently specified pump line. It offers a wide flow range starting at 45gpm up to 1220gpm. It can also be configured to handle pressure to 232psi. Choosing a VX136 for all of your pumping applications means you can reduce maintenance time and spare cost parts - since most of the parts are interchangeable ...

Model IQ-Series - Rotary Lobe Pumps

by Hugo Vogelsang Maschinenbau GmbH     based in Essen Oldb., GERMANY

The concept for greater cost-effectiveness due to less maintenance and service. Rapid maintenance, cost-saving service and extremely simple handling make the rotary lobe pumps in the IQ-series one-of-a-kind. The number of core spare parts was halved compared to the conventional design. This reduces the cost of replacement parts. The IQ series ...

Model K Blue Series - Rotary Lobe Pumps

by ASM DIMATEC Deutschland GmbH     based in Wolfsburg, GERMANY

ROTARY LOBE PUMPS: K BLUE Series For high end applications, high prozess efficiency and quality.0.5 to 28548 l/min 0.030 m3/h bis 1713 m3/h piston set: E, S, DE and DS.pumps: KE-Blue, KS-Blue, KDE-Blue and KDS-Blue up to 64 bar from -60°C to 450°C up to 400 RPM.materials: all available materials.seals: sealing ring, packing, single or ...

Megator - Rotary Lobe Pump

by Megator     based in Pittsburgh, PENNSYLVANIA (USA)

Serving Industrial, Municipal & Sanitary Industries. Pumping fluids that are highly viscous, abrasive, laden with solids or all of these things is the daily task for the Megator Lobe Pump. Due to a number of carefully engineered features, the Megator Rotary Lobe Pump manages such a task whilst ensuring a low life cycle cost. The gentle action ...

NETZSCH TORNADO - Mobile Rotary Lobe Pump

by NETZSCH Group     based in Selb, GERMANY

A TORNADO rotary lobe pump fastened onto a mobile base – this is the NETZSCH TORNADO Mobile. The concept of mounting the equipment onto a car or truck trailer makes it possible to pump large quantities of fluids with solid content, wastewater and slurries at the most unusual of sites. Based on the given application, a TORNADO rotary lobe ...

Model KM Blue Series - Rotary Lobe Pumps

by ASM DIMATEC Deutschland GmbH     based in Wolfsburg, GERMANY

For high end applications, high prozess efficiency and quality, 0,53 to 4046 l/min, 0,032 m3/h to 243 m3/h, piston set: M and M3, pumps: KM-Blue and KM3-Blue, up to 64 bar, from -60°C to 450°C, up to 400 RPM, materials: all available materials, seals: sealing ring, packing, single or double mechanical seal.

Model VX100 Series - Rotary Lobe Pumps

by Hugo Vogelsang Maschinenbau GmbH     based in Essen Oldb., GERMANY

Rotary lobe pumps in the VX100 series are used wherever you only need small capacities but you want the advantages of rotary lobe pumps from the VX series. With capacities of up to 50 m³/h and pressures up to 10 bar, this is the cost-effective and easy-to-maintain solution for a wide range of applications.

Acculobe - Rotary Lobe Pump

by Wright Flow Technologies, Inc.     based in Cedar Falls, IOWA (USA)

IEC or NEMA flange mounting options with integral geared speed reduction.Bulkhead fitted or Foot mounted.Hygienic front-loading seals.Standard 0.6m Ra finish

Concept - Model SQ Series - Rotary Lobe Pump

by Wright Flow Technologies, Inc.     based in Cedar Falls, IOWA (USA)

Ultra hygienic, ultra gentle product handling. The Concept SQ was designed by a team that envisioned a level of cleanliness only a handful of pumps may ever achieve. At its launch, we accomplished just that - it was deemed to be the cleanest pump ever built.

Model VX186Q - Rotary Lobe Pump

by Vogelsang USA     based in Canby, OHIO (USA)

The VX186 Series is our high capacity pump line. It offers an incredibly high flow range starting at 90gpm up to whopping 3520gpm! It can also be configured to handle pressure to 232psi. Choosing a VX186 is ideal for applications involving moving a large volume of liquids containing large solids up to 2.5'. The VX186 pump line is ...

Need help finding the right suppliers?

Let the XPRTs do the work for you