submersible hydraulic pump Equipment available in Brazil

Available in Brazil| Near Brazil
80 Results found

We couldn't find any submersible hydraulic pump equipment in Brazil

Here is a list of results available in Brazil

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pumps ×

  • Keyword: submersible hydraulic pump ×

  • Available in: Latin America ×

  • Available in: Brazil ×

Crisafulli Submersible Hydraulic Pumps

by SRS Crisafulli, Inc.     based in Glendive, MONTANA (USA)

Crisafulli offers 53 standard models of its hydraulic submersible self-priming pumps in sizes from 2 inches to 10 inches, with flow capacities between 200 GPM and 3,800 GPM, Total Dynamic Heads (TDH) between 10 feet and 120 feet, and Solids Passing Capabilities to 3 inches. Custom models up to 24 inches and 18,000 GPM Flows are offered too.

Model S3T - Submersible Hydraulic Water Pumps

by Pow-R Mole Sales LLC     based in Lancaster, NEW YORK (USA)

Our S3T model is designed for jobs such as construction sites and manhole pumping where lightweight, high volume, trash pumps are needed. It has the ability to pass through a 12' opening and pump in debris laden areas. A small hole strainer is available for limiting solids to be pumped.

DuraFlo - Model HTC004 - Submersible Hydraulic Trash Pump

by MWI Corporation     based in Deerfield Beach, FLORIDA (USA)

The DuraFlo hydraulic submersible trash pumps coupled with their diesel or electric drive units are an unbeatable combination for: drying out construction excavations, quarry dewatering, bypassing, sewage, and general municipal use an industrial work.These units are designed and manufactured for the toughest environments. They will run ...

Waste water pump - Model Chopper pump - Submersible chopper pump

by DeTech Pumps Co. Ltd.     based in Nanjing, CHINA

CS series New Generation Chopper PumpAs the increase of population worldwide, and large capacity of waste water effluent. to protect the environment from pollution and to improve the mankind circumstance, and be harmonious with nature. People have to treat all the wastes mankind made. Like water, air, etc.For the water treatment, we have to ...

Model GORATRON Grinder Pumps - Hydraulic pumps

by hoelschertechnic-gorator® GmbH & Co. KG     based in Gescher, GERMANY

Pressure drainage by high-capacity GORATRON submersible grinder pumps Normally in residential areas with low population figures or complicated territorial circumstances the costs for waste water systems are extremely high as they require pipelines with large cross sections. The GORATRON grinder pumps represent a reasonable technical alternative. ...

Heidra - Model 150V - Vortex Hydraulic Submersible Trash/Sewage Pump

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Heidra 150V is a lightweight, compact 6' (150mm) hydraulic pump capable of passing large solids (up to 5'/125mm), stringy materials, and slurries with entrained gases. This pump is designed to pass through a standard 24' (610mm) manhole, making it ideal for sewer bypass applications.

Heidra - Model HS200SG - Slurry Gate Hydraulic Submersible Trash/Sludge Pump

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Heidra HS200SG is a versatile, 8' (200mm) hydraulic submersible pump capable of passing large solids up to 3-1/8' (79mm), stringy materials and slurries. A remotely-operated slurry gate allows the pump to act as a mixer, ideal for pumping thick, viscous, solids-laden sludges, such as those found in WWTP digesters, environmental clean-ups and ...

Heidra - Model 300 - Hydraulic Submersible Pumps

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Heidra 300 hydraulic submersible pump is a self -contained, hydraulic-powered 12' (300 mm) submersible pump with a diesel-driven hydraulic power unit available for heavy duty municipal and industrial dewatering and solids handling pumping applications.

Heidra - Model HS100SG - Slurry Gate Hydraulic Submersible Trash/Sludge Pump

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Heidra HS100SG is a versatile, 4' (100mm) hydraulic submersible pump capable of passing solids up to 2' (50mm), stringy materials and slurries. A remotely-operated slurry gate allows the pump to act as a mixer, ideal for pumping thick, viscous, solids-laden sludges, such as those found in WWTP digesters, environmental clean-ups and API ...

Heidra - Model 80 - Hydraulic Submersible Pumps

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Godwin 3' (75mm) Heidra 80 hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 3' (75mm) submersible hydraulic pump. With variable speed diesel engine power, the Heidra 80 can meet a variety of flow and head requirements up to 420 gpm (26.5 l/sec.) and 125' (38.1M) of total dynamic head ...

Heidra - Model 100TD - Hydraulic Submersible Pumps

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Godwin 4' (100 mm) Heidra 100TD hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 4' (100 mm) submersible hydraulic top discharge pump. With variable speed diesel engine power, the Heidra 100TD pump can meet a variety of flow and head requirements up to 800 GPM (182 m3/h) and 130' ...

Heidra - Model 150MR/V - Hydraulic Submersible Pumps

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Godwin 6' (150mm) Heidra 150MR hydraulic submersible pump offers improved performance and operating efficiencies that cannot be matched by standard electrical submersible models. With variable speed diesel engine power, the Heidra 150MR can meet a variety of flow and head requirements up to 1900 gpm (120 l/sec.) and 160 feet (48.8M) of total ...

Heidra - Model 250 - Hydraulic Submersible Pumps

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Heidra 250 Hydraulic Submersible Pump is a self-contained, diesel powered 10' pump available for heavy duty municipal and industrial dewatering and solids handling pumping applications. The Heidra 250 offers flow rates up to 3500 gpm with up to 185' of total dynamic head and solids handling capability of 3-1/8' in diameter. The unit consists ...

Heidra - Model 200 - Hydraulic Submersible Pumps

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Heidra 200 hydraulic submersible pump is a self-contained, diesel powered 8' (200mm) pump available for heavy duty municipal and industrial dewatering and solids handling pumping applications. The Heidra 200 offers flow rates up to 3100 gpm (703.7 M3/hr.) with up to 180' (54.9M) of total dynamic head and solids handling capability of 3-1/8' ...

Hydraulic Submersible Pumps

by BakerCorp     based in Shafter, CALIFORNIA (USA)

Ideal Usage: High suction lift applications such as sewer bypass jobs. Dewatering of mines, quarries and gravel pits.

Tobee® Pump - Model ZJQ - Tobee® Submersible slurry pump

by Hebei Tobee Pump Co.,Limited     based in Shijiazhuang, CHINA

Tobee® ZJQ Submersible Slurry Pump is hydraulic machinery, the motor and the pump of which arecoaxially submerged in medium to work. The overflowing parts of the pump are made fromhigh alloy wear-resistant material, so the pump has good wear resistance and large flowingpassage.

Tobee® Pump - Model ZJQ - Tobee® Submersible sand pump

by Hebei Tobee Pump Co.,Limited     based in Shijiazhuang, CHINA

Tobee® ZJQ Submersible Sand Pump is hydraulic machinery, the motor and the pump of which arecoaxially submerged in medium to work. The overflowing parts of the pump are made fromhigh alloy wear-resistant material, so the pump has good wear resistance and large flowingpassage.

Model 3U / 3UB - End Suction Centrifugal

by EBARA International Corporation     based in Rock Hill, SOUTH CAROLINA (USA)

The model 3U/3UB end suction centrifugal pump are constructed of bulge formed stainless steel and designed for corrosion resistance, dependable performance, and rugged continuous duty.The model 3UB pumps offer trimmable bronze impellers. The 3UB-65 models extend the hydraulic performance range of the 3U series to 750 gpm. The model 3U/3UB is ...

Griffin - Hydraulic Driven Submersible Pumps

by Griffin Dewatering     based in Houston, TEXAS (USA)

Griffin’s Hydraulic Driven Submersible Pumps are available in trash, axial flow and materials handling models. The pumps range from 4” to 24” with a variety of impeller designs. These pumps are designed for handling high volumes of water up to 20,000 gpm and head conditions up to 140 ft. The impellers can handle solids up to ...

Model 2 - Hydraulic Submersible Trash Pumpies

by Pow-R Mole Sales LLC     based in Lancaster, NEW YORK (USA)

The S2T-2 is a Very Portable Vortex Impeller pump. This pump can handle stringy solids and can be used for jobs such as bilge pumping, jobsite dewatering, wastewater transfer, oil skimmers, vault pumping and grit chamber clean-outs.

Need help finding the right suppliers?

Let the XPRTs do the work for you