Only show results in Virginia? Ok

Submersible Pump (Water and Wastewater Pumps) equipment

  • Premium

    EPG - Model TSP - Submersible Pump Environmental

    The EPG TSP Submersible Pump with level sensor mount is designed with the small diameter vertical well in mind. This pump can be used to pump groundwater, leachate, and other contaminated liquids. It is able to be installed in wells as small as four inches in diameter. When used in conjunction with EPG's LevelMaster Level Monitoring Control System ...

    By EPG Companies Inc. based in Maple Grove, MINNESOTA (USA). from Pumps Product line

  • Premium

    SurePump - Wheeled Sump Drainer Submersible Pumps

    EPG Companies’ patented SurePump Sump Drainers with integral level sensor provide superior performance and accurate liquid level reading for horizontal and vertical applications. The EPG Wheeled Sump Drainers and Vertical Sump Drainers are completely sealed, built with stainless steel for harsh environments and unlike competitor models, draw ...

    By EPG Companies Inc. based in Maple Grove, MINNESOTA (USA). from Remediation Product line

  • Bore Hole Submersible Pumps - Model 50 Hz - Submersible Pumps

    Tormac Pumps is a leading manufacturer of pumps which includes deepwell & centrifugal pumps, waste water & electric motors pumps, open well submersible pumps & motors, bombas submergibles, pompe, multistage & stainless steel submersible pumps are ingeniously designed to meet specific customer requirements.

    By Tormac Pumps based in Coimbatore, INDIA.

  • TT-Pumps - Model Liberator Series - Submersible Pump

    The Liberator® range of submersible drainage pumps that are compact, light and powerful. They are suitable for ground water and water containing sand and silt - maximum solids handling of 7mm.

    By Maris Pumps Ltd based in Chesterfield, UNITED KINGDOM. from Submersible Pumps Product line

  • Subteck - Model RI 4 and 6 - Submersible Pumps

    Submersible pumps for deep wells of 6inch or greater diameter. Sized for connection to 4” Franklin motors up to 7.5 kw and 6” Franklin motors to 37 kw. Flow rates from 50 lpm to 950 lpm. Heads up to 350 m3/hr. Recommended for pumping clean water with a sand content no higher than 100 g/m3. High efficiency pumps with stainless shell and ...

    By Electrical & Pump Services Ltd (EPS) based in Mallow, IRELAND. from Pumping Product line

  • T-T Pumps - Model T-T305 / T-T505 / T-T510 - Submersible Pump

    The T-T305, T-T505 and T-T510 submersible pumps are designed for transferring sewage and effluent, and for dirty water drainage. This range of pumps has a shredding action, produced by the impeller rotating against a special serrated suction cover, and reduces any destructible matter to a manageable size for pumping, minimising the risk of ...

    By T-T Pumps Ltd. based in Woore, UNITED KINGDOM. from Grinder and Chopper Pumps Product line

  • Evo Divertron - Model 1000 - Submersible Pump

    Underwater pressure submersible pump Divertron 1000 with direct suction and built-in control for the automatic switching on and off the pump when water is extracted. The pump sucks in the bottom of the pump casing via a built-in filter the entire pump-scope.

    By Evo Aqua GmbH based in Gundremmingen, GERMANY. from Pumps Product line

  • Submersible Pumps

    Special pumps for ground water monitoring type MP 1.

    By German Water & Energy (GWE) pumpenboese GmbH based in Peine, GERMANY. from Pumps Product line

  • Model JP Series - Submersibles Pump

    Precision-engineered, corrosion-resistant composite pumps deliver efficient, dependable performance even in rough, aggressive water

    By Sta-Rite Pumps - Pentair based in Delavan, WISCONSIN (USA). from Submersible Pumps Product line

  • Model S3P - Submersible Pump

    Submersible multistage centrifugal pumps for 3* wells, particularly suitable for water rising and distribution installations.

    By APD Technology srl based in Chiarano (TV), ITALY. from Submersible Pumps Product line

  • Koshin - Model Ponstar PXL Series - Submersible Pumps

    Ponstar PXL professional residue drainage pump, also known as a puddle sucker pump manufactured by Koshin. Pumps down to 1mm! Mostly of an alloy construction with stainless steel shaft, these submersible pumps have the ability to pump water down to approximately 1mm while the remaining flood water can be swept into the pump for ...

    By Maris Pumps Ltd based in Chesterfield, UNITED KINGDOM. from Submersible Pumps Product line

  • Model 4P series SM - Submersible Pump

    Installation: into 4  deep arthesian wells DN100 with clean and non weapon water* for civil, industrial or fire-fighting plants. Thanks to selected materials and setting of the clearances, our pumps may work very well even with sand. To install the pump, see 'DIRECTIONS FOR USE' sheet.Use: continuous or intermittent service with 4' electric ...

    By APD Technology srl based in Chiarano (TV), ITALY. from Submersible Pumps Product line

  • Model SUB4X - Submersible Pump

    The slim 4-inch submersible pumps are used in drilled holes, wells or open containers for water conveyance. The product line is designed so that you will be able to find the ideal pump for your particular application.High efficiency and long service life ensure energy-saving, cost-efficient operation for many years.No maintenance work is required ...

    By Biral AG based in Munsingen, SWITZERLAND. from Submersible Pumps Product line

  • Submersible Pump

    Hand-carry submersible automatic water pumps.Able to drain infiltrating water, cellars or reservoirs, clean or slightly dirty water and for garden irrigation.

    By Cospet based in Poviglio (Reggio Emilia), ITALY. from Submersible Pumps Product line

  • Model DC - Submersible Pumps

    USES - Drainage pump with set-back Vortex type impeller for pumping charged waters and liquids with suspended solid parts;ideal for civil and domestic use. CONSTRUCTION FEATURES - Steel case and stainless steel suction grid; cast iron pump casing with openings measuring 1'1/2 and 2'; stainless steel set-back Vortex type impeller; double seal with ...

    By Foras Water Pumps Spa based in Veronella (VR), ITALY. from Submersible Pumps Product line

  • Evo Divertron - Model 1200X - Submersible Pump

    Underwater pressure submersible pump Divertron 1200 with 1“ suction and built-in control for the automatic switching on and off the pump when water is extracted. The pump sucks the water either via the included suction basket made of stainless steel or alternatively via a floating pump intake (accessory).

    By Evo Aqua GmbH based in Gundremmingen, GERMANY. from Pumps Product line

  • Model Q(D)X - Submersible Pump

    Q(D)X submersible pump for clean water is scientifically designed. It is mainly applied for flowing rain water collection and pumping water from well, river, cellar, garage, basement, etc. It is also suitable for water supply and drainage in breeding industry. In addition, the applicable medium is clean water without abrasive particles.

    By Shimge Pump Industry Group Co.,Ltd. based in Wenling City, CHINA. from Submersible Pump Product line

  • Model 5 - Submersible Pumps

    Standard Features: Diffuser Cast Iron (GG 25) Ductile Cast Iron (GGG 50) or Bronze (ASTM B145-4A). Outlet - Suction Cast Iron (GG 25) Ductile Cast Iron (GGG 50) or Bronze (ASTM B145-4A). 7.2 m³/sa - 540 m³/sa'These Pumps can supply water from.

    By DELTA CABLE based in Alsancak, TURKEY. from Submersible Pumps Product line

  • Model 6 S6A - 18.0m³/h - 54.0m³/h - Submersible Pumps

    Standard Features: Diffuser Cast Iron (GG 25) Ductile Cast Iron (GGG 50) or Bronze (ASTM B145-4A). Outlet - Suction Cast Iron (GG 25) Ductile Cast Iron (GGG 50) or Bronze (ASTM B145-4A). 7.2 m³/sa - 540 m³/sa'These Pumps can supply water from.

    By DELTA CABLE based in Alsancak, TURKEY. from Submersible Pumps Product line

  • Model IDEA series - Submersible Pump

    4” submersible pumps with AISI 304 stainless steel casing; the pump is designed for solving locking problems in cast iron pumps. The canned stator ensures maximum reliability of operation and maintenance. In the single-phase version pump provide high starting torque. The connector cable can be easily removed. Cooling of the pump is ensured ...

    By Dab Pumps based in Mestrino (PD), ITALY. from Submersible Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you