We couldn't find any submersible pump equipment suppliers or service providers located in Northwest Territories

Here is a list of equipment results with suppliers serving Northwest Territories

submersible pump Equipment available in Northwest Territories

  • Pedrollo - Model 4SR - Submersible Pumps

    Our range of 4” borehole pumps will fit 4” or larger boreholes or shallow wells. Flow rates from 5 lpm to 375 lpm. Head up to 500 mtrs”. Recommended for pumping clean water with a sand content no higher than 150 g/m3. Suitable for use in the domestic, civil and industrial sectors, including for water supplies as part of a ...

    By Electrical & Pump Services Ltd (EPS) based in Mallow, IRELAND. from Pumping Product line

  • Subteck - Model RI 4 and 6 - Submersible Pumps

    Submersible pumps for deep wells of 6inch or greater diameter. Sized for connection to 4” Franklin motors up to 7.5 kw and 6” Franklin motors to 37 kw. Flow rates from 50 lpm to 950 lpm. Heads up to 350 m3/hr. Recommended for pumping clean water with a sand content no higher than 100 g/m3. High efficiency pumps with stainless shell and ...

    By Electrical & Pump Services Ltd (EPS) based in Mallow, IRELAND. from Pumping Product line

  • Tsurumi - Model LB480, LB800 & LB1500 - Submersible Pumps

    The Tsurumi LB480, Tsurumi LB800 and Tsurumi LB1500 offer ultimate durability and are suitable for periods of continuous use and can withstand operator abuse. The strainer base and body are manufactured from tough and durable pressed steel to ensure a lifetime of operation during robust handling.

    By Tsurumi Pumps based in Glendale Heights, ILLINOIS (USA). from Submersible Pumps Product line

  • Submersible Pumps

    Special pumps for ground water monitoring type MP 1.

    By German Water & Energy (GWE) pumpenboese GmbH based in Peine, GERMANY. from Pumps Product line

  • Solar West - Submersible Pumps

    Solar West uses high quality Lorentz pumps that are stainless steel with a brushless design. Each submersible pump includes:  75’ of power cord and a low water sensor for deep well applications. Also available is a float for open access water applications. All Solar West pumps are built without a check valve allowing for water to ...

    By Solar West based in Calmar, ALBERTA (CANADA). from Pumps Product line

  • EBARA - Model DMLU - Submersible Pump

    A new, economical alternative, the model DMLU non-clog, single channel impeller pumps are suitable for use in commercial and industrial waste water applications. The Model DMLU is constructed of robust cast iron with a large diameter, short overhang shaft and stainless steel fasteners. The single channel impeller has 3'' spherical passage and also ...

    By Burt Process Equipment, Inc. based in Hamden, CONNECTICUT (USA). from Pump Product line

  • Model Q(D)X - Submersible Pump

    Q(D)X submersible pump for clean water is scientifically designed. It is mainly applied for flowing rain water collection and pumping water from well, river, cellar, garage, basement, etc. It is also suitable for water supply and drainage in breeding industry. In addition, the applicable medium is clean water without abrasive particles.

    By Shimge Pump Industry Group Co.,Ltd. based in Wenling City, CHINA. from Submersible Pump Product line

  • Model IM10 - Submersible Pumps

    Construction: Submersible motor pumps for deep wells of 4″ (DN 100 mm), with turbine impeller. The stainless steel hydraulics end special plastic materials, prevent the impeller jamming, even after an extenden stoppage. Thanks to special construction features, both installation and maintenance of IM 10 are fast and easy. Delivery port G 1.

    By Subteck based in S.Vito al Tagliamento (PN), ITALY. from Submersible Pumps Product line

  • Shakti - Submersible Pumps

    Shakti submersible pumps are manufactured from the superlative quality raw material using advanced fabrication technology, which ensure optimum performance and excellent quality. Submersible Pumps50 HZ Pumps : Our Product Range 100 mm well size (4”) 150 mm well size (6”) 200 mm well size (8”) 200 mm well size (10”) 250 mm ...

    By Shakti Pumps (I) Ltd based in Pithampur, INDIA.

  • Model PS14 - Submersible Pump

    Body and turbine : cast iron. Motor housing: stainless steel. Maximum water temperature : 40°C. Maximum admissible particle diameter : 45 mm.Maximum immersion depth : 5 m. Flow rate 2 to 16 m3/h

    By Pompes Japy based in Fesches-le-Châtel, FRANCE. from Clean Water Submersible Pumps Product line

  • Submersible Pumps

    Selwood has one of the most extensive ranges of ums and uming equiment in the country backed by our own suort service. Our fleet contains our own roduct ranges lus other manufacturers' equiment, such as submersible, electro and hydraulic, air driven and secialist high head and high flow ums.The roducts and equiment comiled in the downloadable ...

    By Selwood Group Limited based in Eastleigh, UNITED KINGDOM.

  • Model SS233 - Submersible Pumps

    This lightweight, compact submersible pump is the first choice for household moving water applications such as: flooded rooms, flat roofs, fill tanks, basins, fountains and waterfalls. Hardy thermoplastic pump casing body resists corrosion and heat. Further, the SS233 incorporates internal thermal overload protection, dual shaft seals, and ...

    By Multiquip Inc. based in Carson, CALIFORNIA (USA). from Construction Solutions- Water Pumps & Trailers Product line

  • Submersible Pump

    A submersible pump is a turbine pump close-coupled to a submersible electric motor. Both pump and motor are suspended in the water, thereby eliminating the long drive shafts and bearing retainers required for a deep well turbine pump. Because the pump is located above the motor, water enters the pump through a screen located between the pump and ...

    By Layne Bowler Pump Company Inc. based in Yenimahalle / Ankara, TURKEY.

  • Model Mini SVO - Submersible Pump

    SUBMERSIBLE PUMP FOR WASTEWATER, RAINWATER AND INFILTRATIONS For the lift-pumping of wastewater, rainwater and infiltrations from collective residential, tertiary and commercial buildings.

    By SALMSON based in Chatou Cedex, FRANCE. from Sewage and Drainage Product line

  • Model FVO 204 - Submersible Pump

    SUBMERSIBLE PUMP FOR WASTEWATER, RAINWATER AND INFILTRATIONS For the lift-pumping of wastewater, rainwater and infiltrations from collective residential, tertiary and commercial buildings.

    By SALMSON based in Chatou Cedex, FRANCE. from Sewage and Drainage Product line

  • Aqua-Mate - Model 211 - Submersible Pumps

    Submersible pump for sewage/effluent or dewatering, passes 2' solids, 2' NPT discharge.

    By Zoeller Pump Company based in Louisville, KENTUCKY (USA). from Sewage & Dewatering Product line

  • 6 Inch Submersible Pump

    Water pumps for deep wells Submersible Pump of 6' Dia. Sized for connection to the motor according to NEMA standards. Stainless steel discharge head with built-in non-return valve. High Efficiency stainless steel Bowls and Impellers. Stainless Steel motor connector. Stainless Steel pump casing. Stainless steel pump shaft, coup

    By Submersibles and Electric Inc. (SEI) based in Phoenix, ARIZONA (USA). from Submersible Pumps Product line

  • 8 Inch Submersible Pump

    Water pumps for deep wells Submersible Pump of 8' Dia. Sized for connection to the motor according to NEMA standards. Stainless steel discharge head with built-in non-return valve. High Efficiency stainless steel Bowls and Impellers. Stainless Steel motor connector. Stainless Steel pump casing. Stainless steel pump shaft, coup

    By Submersibles and Electric Inc. (SEI) based in Phoenix, ARIZONA (USA). from Submersible Pumps Product line

  • 10 Inch Submersible Pump

    Water pumps for deep wells Submersible Pump of 10' Dia. Sized for connection to the motor according to NEMA standards. Stainless steel discharge head with built-in non-return valve. High Efficiency stainless steel Bowls and Impellers. Stainless Steel motor connector. Stainless Steel pump casing. Stainless steel pump shaft, cou

    By Submersibles and Electric Inc. (SEI) based in Phoenix, ARIZONA (USA). from Submersible Pumps Product line

  • Electric Submersible Pumps

    Ideal Usage: Removing water and handling solids up to 3.15' when electric power source is available.

    By BakerCorp based in Shafter, CALIFORNIA (USA). from Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you