We couldn't find any weirs, sluices, flumes, gates equipment suppliers or service providers located in Malawi

Here is a list of equipment results with suppliers serving Malawi

Weirs, Sluices, Flumes, Gates Equipment available in Malawi

  • Premium

    VA Teknik - Outlet Weirs

    VA Teknik’s outlet weirs for surface water removal from rectangular clarifying tanks are made of stainless steel with Thompson v-notches.

    By Hydria Water AB based in Borås, SWEDEN. from Products From VA Teknik Sweden Product line

  • Premium

    WesTech CenTROL - Conventional Gravity Filters

    CenTROL filters may be applied wherever a cost-effective, space-saving conventional gravity filter is desired. The heart of the General Filter CenTROL lies in the prefabricated center column that eliminates onsite assembly of a piping gallery.  CenTROL furnishes its own backwash water supply from in-service cells.  In most cases, ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Drive Units Product line

  • Premium

    DESMI TERMINATOR - High Capacity Self-Adjusting Weir Skimmer

    The design of the DESMI TERMINATOR skimmer has benefited from a continuing development programme of more than 25 years. The resulting system is a very versatile, reliable, powerful and seaworthy oil skimming system that can be used in a wide variety of applications.

    By DESMI A/S based in Noerresundby, DENMARK. from Oil Spill Response Product line

  • Premium

    DESMI - Model MINI-MAX - Self-Adjusting Weir Skimmer

    The unique DESMI MINI-MAX is a self-adjusting weir skimmer that is capable of recovering a wide range of oils and products floating on the water surface. It is ideal for small industrial separators, tanks and waters. This skimmer can be coupled directly to a vacuum truck or other suction pumps such as diaphragm pumps. The DESMI MINI-MAX is ideal ...

    By DESMI A/S based in Noerresundby, DENMARK. from Oil Spill Response Product line

  • Premium

    DESMI TERRAPIN - Self-Adjusting Weir Skimmer

    The DESMI TERRAPIN is a self-adjusting weir skimmer ideal for installation and deployment in tanks, industrial separators, wells and sumps where floating oil and other floating liquids need to be recovered.

    By DESMI A/S based in Noerresundby, DENMARK. from Oil Spill Response Product line

  • Premium

    ANDRITZ TurboJet - Weir Plates

    ANDRITZ SEPARATION developed a next-generation weir plate - TurboJet - which drastically reduces a centrifuge’s absorbed power up to 30%. The patented TurboJet weir plate guides the liquid discharge from the centrifuge in the opposite direction to the bowl rotation. Adjustable nozzles form a jet similar to a jet engine’s exhaust. This ...

    By ANDRITZ Separation - a division of the Andritz Group based in Graz, AUSTRIA. from Process Lines Product line

  • Premium

    ANDRITZ - Model D-Type - Large Decanter Power Savings

    New design features for Andritz Separation D-type decanters enable significant - up to 40% - reduction of total power consumption while maintaining throughput and efficiency. With power costs rising, this level of power savings translates into a very fast return on investment. The power-saving features are available on new D5 to D10 decanters. The ...

    By ANDRITZ Separation - a division of the Andritz Group based in Graz, AUSTRIA. from Process Lines Product line

  • Premium

    Mellegard & Naij - Model ST - Sand Washer

    Selectable agitation technologies. Vibrator, Mixer, Air/water injector. Selectable sand level measuring. Pressure sensor, Load cell, Sonar. Maximum volume and surface enables use as ”combi unit” grit trap. Dry sand feed version. Made of robust thick high quality stainless material. Enclosed, safe & hygienic with easy to open access ...

    By Hydria Water AB based in Borås, SWEDEN. from Products From Mellegard & Naij Product line

  • Premium

    WesTech ESSD - Washtroughs and Collectors

    ESSD washtroughs and collectors provide a high quality, low cost, engineered product that is economical and versatile. ESSD washtroughs can be provided with v-notch weir plates or orifices when used for clarifiers, and with MULTIWASH baffles when used for gravity filters.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Filtration Product line

  • Premium

    Teledyne Isco - Model 2110 - Ultrasonic Flow Module

    The 2110 Ultrasonic Module provides accurate noncontact liquid level measurement, using built-in software to calculate flow in weirs, flumes and streams. When used in conjunction with Isco’s Flowlink software, that information can be managed and used in a wide variety of ways. With the 2110, an ultrasonic sensor mounted above the flow stream ...

    By Teledyne Isco based in Lincoln, NEBRASKA (USA). from Open Channel Flow Measurement Product line

  • Premium

    Grande - Model TRU-FLAP - Floating Flap System

    The TRU-FLAP Floating Flap System is designed to prevent flooding and backflows caused by high downstream water levels and acts as a floating weir whose crest elevation self-adjusts. The TRU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, retention tank overflows and basin ...

    By Grande Water Management Systems based in Laval, QUEBEC (CANADA). from Flood Protection Product line

  • Premium

    EUROPELEC - Central Drive Thickener

    The job of the EUROPELEC CENTRAL DRIVE THICKENER is to thicken sludge from municipal or industrial wastewater treatment plants. It can be used in small or medium-sized installations. Effluent is channelled to the centre of the tank in the influent well where it is spread evenly and without turbulence over the thickening zone. The clean effluent is ...

    By EUROPELEC based in Paris, FRANCE. from Sludge Product line

  • Premium

    EUROPELEC - Scraper Bridge

    The job of the EUROPELEC cantral drive thickener is to thicken sludge from municipal or industrial wastewater treatment plants. It can be used in small or medium-sized installations. Effluent is channelled to the centre of the tank in the influent well where it is spread evenly and without turbulence over the thickening zone. The clean effluent is ...

    By EUROPELEC based in Paris, FRANCE. from Sludge Product line

  • Premium

    Rotork - Model IS Range - Motorised Multi-turn gearboxes

    Rotork Gears Series IS operators are Multi-turn (rotary) devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for manual and motorised applications.Torque range up to 46,100 NmThrust range up to 4,350 kNTotally enclosed gearingGrease filled for lifeRemovable output sleeve

    By Rotork based in Bath, UNITED KINGDOM. from Valve Gear Operators Product line

  • Premium

    ENTA - Sluice Gates / Stoplogs

    Wall type penstocks are used to control the flows in the tanks at the water and wastewater treatment plant and to provide the isolation. At all designs of ENTA especially the impermeability is provided by the use of the P,V and double-lipped seals besides the four side of the penstocks and for 1 m seal length (at the pressure of 5 m on seat or 4 m ...

    By ENTA Treatment Systems Engineering Contracting LTD based in Seyrantepe-Sarıyer, TURKEY. from Water Flow Control Devices Product line

  • Premium

    Grande - Model TRU-BEND - Overflow Bending Weir System

    The TRU-BEND Overflow Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The TRU-BEND’s unique and extensively tested design operates ...

    By Grande Water Management Systems based in Laval, QUEBEC (CANADA). from Overflow Control Product line

  • Premium

    Grande - Model SURE-BEND - Hydraulically Operated Bending Weir System

    The SURE-BEND Hydraulically Operated Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The SURE-BEND’s unique and extensively tested ...

    By Grande Water Management Systems based in Laval, QUEBEC (CANADA). from Overflow Control Product line

  • Premium

    Grande - Model ACU-PRO - Overflow Measuring Profile System

    The ACU-PRO Overflow Measuring Profile System is designed to improve a weir’s hydraulic capacity and to accurately measure its overflow discharges. The ACU-PRO’s unique and extensively tested design utilizes the upstream and downstream water levels in conjunction with the flow curve to accurately monitor and record the overflow ...

    By Grande Water Management Systems based in Laval, QUEBEC (CANADA). from Overflow Control Product line

  • Premium

    ENTA - Adjustable Weirs

    Adjustable weirs are mostly utilized for level control. The main feature that sets them apart from sluice gates is that they allow partial opening control. Furthermore, they may be opened downwards or in angles, as the main purpose is controlling the water level, as opposed to sluices gates that usually open upwards.

    By ENTA Treatment Systems Engineering Contracting LTD based in Seyrantepe-Sarıyer, TURKEY. from Water Flow Control Devices Product line

  • Premium

    NivuLog SunFlow - Self-Sufficient, Solar-Powered Flow Measurement Station

    The NivuLog SunFlow is a self-sufficient, solar-powered flow measurement station independent from mains power with integrated GPRS data transmission. The discontinuous flow measurement is suited for slight to heavy polluted media in open channels, flumes as well as in part filled and full pipes. The NivuLog SunFlow is designed for flow ...

    By NIVUS GmbH based in Eppingen, GERMANY. from Permanent Flow Monitoring Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you