control gate Equipment available in Trinidad & Tobago

Available in Trinidad & Tobago| Near Trinidad & Tobago
67 Results found

We couldn't find any control gate equipment in Trinidad & Tobago

Here is a list of results available in Trinidad & Tobago

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Weirs, Sluices, Flumes, Gates ×

  • Keyword: control gate ×

  • Available in: Latin America ×

  • Available in: Trinidad & Tobago ×

Tecweigh - Control Gates

by Tecnetics Industries, Inc.     based in St. Paul, MINNESOTA (USA)

Tecweigh Control Gates provide flow control of aggregate materials ranging from sand to 6' material for load-out, batching and blending applications.Control gates feature heavy duty galvanized steel construction and permanently lubricated motor, gearbox and bushings. A precision position sensor monitors open/closed percentage, and flow switch ...

Penstock / Sluice - Model 4 - Water Control Gate

by SISTAG AG     based in Eschenbach, SWITZERLAND

Design: Steel fabricated construction with fully guided gate, 3- or 4-sides tight.Width Type: 200-1500 mm.Actuation: alle type.Material: 1.4406 (316L).Range of application: Water & Waste.Water Treatment

Penstock Sluice - Model 3 - Water Control Gate

by SISTAG AG     based in Eschenbach, SWITZERLAND

Design: Steel fabricated construction with fully guided gate, 3- or 4-sides tight Width Type: 700 - 4000 mm Actuation: alle type Material: 1.4406 (316L) Range of application: Water & Waste Water Treatment

Pit Sluice - Water Control Gate

by SISTAG AG     based in Eschenbach, SWITZERLAND

Design: Steel fabricated construction with fully guided gate, 4-sides tight.Width: 150, 200, 250, 300, 350, 400, 500 mm.Actuation: Socket (4).Material: 1.4404 / PE-UHMW.Einbau: Round and rectangular ducts.Range of application: Water & Waste Water Treatment

Model Series 642 - Control Gate Valve

by VAT Vacuumvalves AG     based in Haag, SWITZERLAND

For semiconductor, FPD and industrial processes, e. g. sputtering and etching systems.

Armtec - Water Control Gates

by Armtec     based in Guelph, ONTARIO (CANADA)

Armtec is an industry leader in water control gates for wastewater treatment plants, water treatment plants, and irrigation and flood control projects. Thousands of customers globally can attest to the high quality of Armtec’s gate products.

Golden Harvest - Model GH-9000 - Constant Upstream Level Control Gates

by Golden Harvest, Inc.     based in Burlington, WASHINGTON (USA)

The Golden Harvest, Inc. Model GH-9000 Level Control Gate utilizes force-balance control to automatically maintain a constant upstream water level at any given discharge while minimizing head loss. Sizes and materials of construction are available to meet a wide variety of flow control needs ranging from almost zero to 2000 cfs. The gate nearly ...

Hardie-Tynes - Water Control Gates and Valves

by Hardie-Tynes Company, Inc.     based in Birmingham, ALABAMA (USA)

Forebay Gate, Mechanical Hoist and Support Structure designed and built by Hardie-Tynes for the Eastside Reservoir Project Southern California.

Drive-over Water Control Gates

by Obermeyer Hydro, Inc.     based in Fort Collins, COLORADO (USA)

Obermeyer drive-over water control gates provide protection against flood damage from water entering through vehicle garage entrances. Obermeyer drive-over water control gates are available with a flush which is sufficiently robust to support highway traffic and is also suitable for pedestrian use. These systems are configured to provide easy ...

Model ACU-GATE - Flushing Gate System

by Grande Water Management Systems     based in Laval, QUEBEC (CANADA)

The ACU-GATE Flushing Gate System is a sediment flushing device designed to remove settled debris from storm water detention tanks, combined sewer overflow (CSO) retention tanks, sanitary sewer overflow (SSO) equalization tanks and reservoir floors, as well as sewer inverts, using a single flush. It has been used in CSO, SSO applications and can ...

Roller Gates

by Steel-Fab, Inc.     based in Fitchburg, MASSACHUSETTS (USA)

Steel-Fab roller gates are typically used where opening sizes are too large to efficiently use slide gates, or for applications where gravity closure is a requirement. The use of a wheeled gate results in significantly lower operating loads, thereby providing an effective means for emergency closure applications.

Langemann Gate

by Aqua Systems 2000 Inc.     based in Lethbridge, ALBERTA (CANADA)

Invented by Peter Langemann, the Langemann Gate was developed through a cooperative effort between St. Mary River Irrigation District, Peter Langemann and Aqua Systems 2000 Inc. (AS2I). The Langemann gate, used in conjunction with one of AS2I’s controllers, provides solutions to a host water of control problems. The patented design has ...


by TEMAK S.A.     based in Acharnes (Menidi) Attikis, GREECE

TEMAK can offer knife/gate valves, for use at waste water networks, or for water with high concentration of suspended solids, pulp or powders. Installation and piping connection is 'wafer' or 'lugged' type. The operation of the valve can be manual or automatic by means of pneumatic or electric actuator.

Floating Bulkhead Gates

by Steel-Fab, Inc.     based in Fitchburg, MASSACHUSETTS (USA)

Steel-Fab floating bulkheads are typically used for spillway openings where inaccessibility or size, prevent the use of a conventional bulkhead gate. The floating bulkhead consists of individual sections called caissons that are floated into place, pinned together then chambers in the caissons are filled with water as needed to lower the assembled ...

Hydra - LOPAC Gate

by Aqua Systems 2000 Inc.     based in Lethbridge, ALBERTA (CANADA)

The LOPAC gate was developed by Peter Langemann in the 1980s to assist tail end irrigators in managing widely fluctuating water supplies. A number of installations have operated successfully for the past couple of decades. Aqua Systems 2000 Inc. (AS2I) has combined the simplicity of the LOPAC with a hydraulic actuator to provide a flexible and ...

Tractor/Caterpillar Gates

by Steel-Fab, Inc.     based in Fitchburg, MASSACHUSETTS (USA)

Steel-Fab designed and manufactured two new tractor/caterpillar gates for installation into the existing gate slots at the Buford Dam on Lake Lanier in Georgia. Each gate featured an integral jet flow gate designed to solve a long standing vibration problem during minimum flow releases.The tractor/caterpillar gates are supported along either side ...

HydroBend - Weir Gates

by Steinhardt GmbH Wassertechnik     based in Taunusstein, GERMANY

According to ATV A128 [Wastewater Technology Association], rainwater overflow basins and retaining canals are to be furnished with spillway dams. In the event of strong rainfall they divert excess water into the surrounding bodies of water. The upper edge of the spillway dam is the maximum storage level with which the chargeable storage volume is ...

Model 022110 + 022210 - Gate Valves with Actuator

by Perlwitz Armaturen GmbH     based in Schenefeld, GERMANY

Gate valves - flat body, gate valves - oval body, knife gate valves.Type 022110 - with hydraulic actuator type 022210 - with electric actuator

Model 31 - Resilient Seated Gate Valve

by Viking Johnson     based in Hitchin, UNITED KINGDOM

The Viking Johnson Resilient Seated Gate Valve is fully compliant to BS EN 1074-2 and include WRAS approved materials. Its lightweight design construction of ductile iron offers a robust and durable extended life performance.

Model e-TAE - Gate Valve Turning Device

by Friedrich Köster GmbH & Co. KG     based in Heide, GERMANY

Purpose: electric manual actuator for actuating fittings Materials: GG 20, S 235JRG2, 1.4301, 1.4571. Torque: adjustable from 25-160 Nm, from 40-140 rpm.

Need help finding the right suppliers?

Let the XPRTs do the work for you