flap gate Equipment available in Monaco

Available in Monaco| Near Monaco
15 Results found

We couldn't find any flap gate equipment in Monaco

Here is a list of results available in Monaco

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Weirs, Sluices, Flumes, Gates ×

  • Keyword: flap gate ×

  • Available in: Europe ×

  • Available in: Monaco ×

Model 450 - Flap Gate

by Whipps, Inc.     based in Athol, MASSACHUSETTS (USA)

Series 450 Flap Gates are used for backflow prevention in gravity flow; pump discharge and tidal applications. Fabricated Flap Gates offer high performance and long life in designs that accommodate a wide range of mounting arrangements and flow conditions. Rugged, reinforced construction is combined with a resilient seal to provide a heavy-duty, ...

Flap Gate

by Rodney Hunt Company - VAG Valve and Gate Group     based in Orange, MASSACHUSETTS (USA)

Rodney Hunt-Fontaine Flap Gates are designed to prevent the reverse flow of water through an opening. They feature adjustable hinges, which control the force needed to move the flap. Several different models are available for specific applications.

Golden Harvest - Model GH-39 - Stainless Steel & Aluminum Flap Gates

by Golden Harvest, Inc.     based in Burlington, WASHINGTON (USA)

Golden Harvest, Inc. supplies Flap Gates in stainless steel, aluminum, and spun aluminum and supplied with neoprene seals. Flexible design available in square, rectangular and circular shapes. Automatic, circular opening for gravity flow and pump discharge can be aluminum or stainless steel. Stainless steel construction is recommended for pump ...

Model RR Series - Round Flap Gate

by Orbinox     based in Anoeta, SPAIN

Round swing check gate to be wall-mounted or flanged, intended to prevent backflow and commonly installed at the end of a line, as a check valve. Carbon or stainless steel fabricated construction, with tight sealing by means of an elastomer seal. Available in a wide range of dimensions and for many different pressure heads. May include a ...

Flap Gates and Bear Trap Gates

by Braun Maschinenfabrik Gesellschaft m.b.H.     based in Vöcklabruck, AUSTRIA

The functional principle of weir flaps may be simple, the technology behind it is all the more complex. Because of the hydro-dynamic forces associated with discharging high water the demands on design are exacting. BRAUN flap gates are customized to specific requirements. Our competent engineering department develops the best and most efficient ...

Model ASA - Dams, Flushing Weirs and Relief Weir

by HST Systemtechnik     based in Meschede, GERMANY

ASA weirs serve primarily as cascade dams, flushing weirs and relief weirs. They activate reservoir volumes, generate hydropeaking and make a variable overflow edge to separating structures and relief dams. Technically, the ASA weirs are XXL hydraulically-driven, pressure- sealed sliders, manufactured with the highest level of precision.

Model ACU-GATE - Flushing Gate System

by Grande Water Management Systems     based in Laval, QUEBEC (CANADA)

The ACU-GATE Flushing Gate System is a sediment flushing device designed to remove settled debris from storm water detention tanks, combined sewer overflow (CSO) retention tanks, sanitary sewer overflow (SSO) equalization tanks and reservoir floors, as well as sewer inverts, using a single flush. It has been used in CSO, SSO applications and can ...

Pivot Gates

by Gerhardt Christensen A/S     based in Storvorde, DENMARK

Produced in sizes width = B up to 6,000 mm and in heights = H up to 2,000 mm. The main axle of the gate plate can be positioned top or bottom. The pivot gate is available as overflow gate or underflow gate. The pivot gate may be driven by hydraulics from a dry machine room or by electrical actuator. The main axle is equipped with greased bronze ...

Rotork - Model AH Series - High-cycle Actuator

by Rotork     based in Bath, UNITED KINGDOM

The Rotork AH Series high-cycle actuator is ideal for the demanding service found under precipitators on the ash hopper flap gates.

Weir Gates

by Hans Kuenz GmbH     based in Hard, AUSTRIA

Kuenz weir gates are designed and manufactured specific to a project. Our weir gates are installed with or without flaps and are in particular suited for silt removal in case of flood waters. The world needs energy. Kuenz´s innovative technologies take care of that. Kuenz provides customized, integrated concepts for every customer. Decades ...

Double Pendelum Gate

by KREISEL GmbH & Co. KG     based in Krauschwitz, GERMANY

Double flap gates are used to seal vacuum chambers with simultaneous discharging of dust-based and flowing material. KREISEL double flap gates are particularly suitable for discharging of highly abrasive bulk materials at the basic industry as well as the chemical industry: minerals, nature stone, ash, cement, ceramics and coal. The operating ...

Armtec - Water Control Gates

by Armtec     based in Guelph, ONTARIO (CANADA)

Armtec is an industry leader in water control gates for wastewater treatment plants, water treatment plants, and irrigation and flood control projects. Thousands of customers globally can attest to the high quality of Armtec’s gate products.

RIPOS / RIPOS smart - Rotary Transmitter

by Rittmeyer     based in Baar, SWITZERLAND

RIPOS is a rotary transmitter for measuring of positon and angles.

Quarter-Frame End Dumps

by Clement Industries     based in Minden, LOUISIANA (USA)

Cement's Quarter-Frame steel end dump has become the standard against which other trailers are now judged. With the high dump point of a frame and the stabilizer arms of a frameless, the Clement Quarter-Frame is the ultimate trailer for stockpling and dumping asphalt into a dumping machine. The Clement Quarter-Frame offers the paving contractor ...

Duckbill - Model Series TF-1 - Check Valve

by Tideflex Technologies - a Division of Red Valve Company, Inc.     based in Carnegie, PENNSYLVANIA (USA)

The TF-1 has become the preferred Tideflex configuration for outfalls. Designed for in-structure and end-of-pipe installations, the TF-1 features a flat bottom and flared top. This allows the valve to be installed at a lower overall elevation than other configurations, with less bottom clearance required. This is especially important in low-lying ...

Need help finding the right suppliers?

Let the XPRTs do the work for you