sluices Equipment

105 Results found
Only show results available in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: Weirs, Sluices, Flumes, Gates ×

  • Keyword: sluices ×

Telescopic Valves

by FRIULANA COSTRUZIONI s.r.l.     based in Vigonovo Di Fontanafredda, ITALY

The telescopic valve has the function of regulating and/or blocking the extraction of the liquid in a basin, thanks to the cursor height adjustment, which is controlled manually (by handwheel) and/or automatically (by actuator). The hydraulic seal is ensured by an O ring, having a section suitable for the cursor diameter.

Four-Side Sealing Sluice Gate with Actuator

by FRIULANA COSTRUZIONI s.r.l.     based in Vigonovo Di Fontanafredda, ITALY

The four-side sealing sluice gate with actuator has the function of hermetically blocking a water flow in a channel or a basin. This operation is ensured by the opening or closing of a pad actuated automatically by an actuator. The sluice gate is fixed to the wall of the channels, usually made of reinforced concrete, finished so as to not exhibit ...

Plank

by FRIULANA COSTRUZIONI s.r.l.     based in Vigonovo Di Fontanafredda, ITALY

The plank has the function of intercepting and/or deviating a water flow in a channel or a basin. This operation is carried out manually or by external lifting means. The plank can be made in a single piece or consist of multiple parts inserted one into the other to reach the desired level.

Manual Four-Side Sealing Sluice Gate

by FRIULANA COSTRUZIONI s.r.l.     based in Vigonovo Di Fontanafredda, ITALY

The four-side sealing sluice gate with manual actuation has the function of hermetically blocking a water flow in a channel or a basin. This operation is ensured by the opening or closing of a pad actuated manually by a handwheel. The sluice gate is fixed to the wall of the channels, usually made of reinforced concrete, finished so as to not ...

Manual Three-Side Sealing Sluice Gate

by FRIULANA COSTRUZIONI s.r.l.     based in Vigonovo Di Fontanafredda, ITALY

The three-side sealing sluice gate with manual actuation has the function of intercepting and/or deviating a water flow in a channel or a basin. This operation is ensured by the opening or closing of a pad actuated manually by a handwheel. The sluice gate is fixed to the wall of the channels, usually made of reinforced concrete, finished so as to ...

Three-Side Sealing Sluice Gate with Actuator

by FRIULANA COSTRUZIONI s.r.l.     based in Vigonovo Di Fontanafredda, ITALY

The three-side sealing sluice gate with actuator has the function of intercepting and/or deviating a water flow in a channel or a basin. This operation is ensured by the opening or closing of a pad actuated automatically by an actuator. The sluice gate is fixed to the wall of the channels, usually made of reinforced concrete, finished so as to not ...

Clapet Valves

by FRIULANA COSTRUZIONI s.r.l.     based in Vigonovo Di Fontanafredda, ITALY

The clapet valve has the function of allowing the flow of water coming from a channel towards the river, while preventing the back-flow of the water of rivers in a flood, towards the channel. This function is ensured by the opening of a pad actuated by the thrust of the water coming from the channel. A special balance weight is fitted on top of ...

Sluice Gates /Stoplogs

by ENTA Treatment Systems Engineering Contracting LTD     based in Istanbul, TURKEY

Wall type penstocks are used to control the flows in the tanks at the water and wastewater treatment plant and to provide the isolation. At all designs of ENTA especially the impermeability is provided by the use of the P,V and double-lipped seals besides the four side of the penstocks and for 1 m seal length (at the pressure of 5 m on seat or 4 m ...

Sluices

by Opitz + Flierl Hospitaltechnik AG     based in Heideck, GERMANY

The sluice is an important part of the laboratory area. On the one hand, it functions as a sluice between the contaminated and uncontaminated sections of the unit. On the other hand, through the use of its disinfecting process, it ensures the reliable cleansing of personnel and material from infectious bacteria, before entering the uncontaminated ...

Penstock / Sluice - Model 4 - Water Control Gate

by SISTAG AG     based in Eschenbach, SWITZERLAND

Design: Steel fabricated construction with fully guided gate, 3- or 4-sides tight.Width Type: 200-1500 mm.Actuation: alle type.Material: 1.4406 (316L).Range of application: Water & Waste.Water Treatment

Penstock Sluice - Model 3 - Water Control Gate

by SISTAG AG     based in Eschenbach, SWITZERLAND

Design: Steel fabricated construction with fully guided gate, 3- or 4-sides tight Width Type: 700 - 4000 mm Actuation: alle type Material: 1.4406 (316L) Range of application: Water & Waste Water Treatment

Pit Sluice - Water Control Gate

by SISTAG AG     based in Eschenbach, SWITZERLAND

Design: Steel fabricated construction with fully guided gate, 4-sides tight.Width: 150, 200, 250, 300, 350, 400, 500 mm.Actuation: Socket (4).Material: 1.4404 / PE-UHMW.Einbau: Round and rectangular ducts.Range of application: Water & Waste Water Treatment

Split Gates

by Watch Technologies     based in Grants Pass, OREGON (USA)

Dual blade, dual action, automated, solar-powered or AC, Smart Split Gates by Watch Technologies combines the functionality of two separate gates into one: bottom-up discharge flow control, debris sluicing, and automatic emergency dump, and top-down surface control and/or measuring weir. Easily deployed and programmed, cost efficient, reliable. ...

Model CP3 - Channel Penstock

by BÜSCH Technology GmbH     based in Nürnberg, GERMANY

Easy installation in front or inside channels and superior corrosion resistance make CP3 your first choice for all channel applications. The pre-tensioned sealing is tight even under low seating or unseating head conditions giving CP3 its outstanding sealing qualities.

Model XL3 - Channel Penstock

by BÜSCH Technology GmbH     based in Nürnberg, GERMANY

Big penstock are exposed to high forces. The high stability and reliability of the XL3 channel penstock are guarantor for a trouble-free and satefy operation of your plant.Due to the pre-stressed sealing gives the XL3 channel penstock an extraordinary sealing performance in onseating conditions as well as in off-saeting conditions. The light, but ...

Sluice Gates

by SISMAT ULUSLARARASI LTD. STI.     based in KOCAELI, TURKEY

Sluice gates, which can be mounted into the channel or on the wall, are manufactured in a wide range of models including manual, electric driven or pneumatic types. We manufacture sluice gates in various dimensions from 150x150 mm up to 4,000x4,000 mm with the casing and frame thickness calculated regarding water pressure.

Sluice Gates

by Claro Inc     based in Montreal, QUEBEC (CANADA)

Claro offers a variety of Parshall flumes and sluice gates in conjunction with its screening and grit removal systems. This auxiliary equipment is manufactured to suit the requirements of your application.

Model DDS - Pressure Sluice

by Warex Valve GmbH     based in Senden, GERMANY

With automated unit for the ventilation of the pressure chamber - for a differential pressureless feed or discharge of bulk solids and powders in or out of pressure or vacuum systems.

Model AWS - Flushing Sluice

by HST Systemtechnik     based in Meschede, GERMANY

The solution for storage sewers without installations in the flow cross-section. The AWS flush sluice is a cleaning system for sewage storage spaces and canals of any cross-section sizes. Deposits are dissolved and transported by flushing waves.

Sluice Gate

by Coutex Equipos y Proyectos S.A     based in L`hospitalet del LLobregat, SPAIN

A sluice gate is a mechanism used to cut off or obstruct the passage of a fluid, normally water. They have three main parts: a gate, a frame and a power mechanism. They can be designed for different loads of water and operating heights, according to the requirements of the installation.

Need help finding the right suppliers?

Let the XPRTs do the work for you