weir plate Equipment available in Yukon

  • Premium

    ANDRITZ TurboJet - Weir Plates

    ANDRITZ SEPARATION developed a next-generation weir plate - TurboJet - which drastically reduces a centrifuge’s absorbed power up to 30%. The patented TurboJet weir plate guides the liquid discharge from the centrifuge in the opposite direction to the bowl rotation. Adjustable nozzles form a jet similar to a jet engine’s exhaust. This ...

    By ANDRITZ Separation - a division of the Andritz Group based in Graz, AUSTRIA. from Process Lines Product line

  • Protectolite - Weir Plates, Baffles & Troughs

    Protectolite Inc., manufactures weir plates and scum baffles, specialty baffles plus related accessories molded from fiberglass reinforced polyester (FRP) composites. The inherent properties of FRP weirs, troughs and baffles make them ideal for use in water and wastewater appli-cations.

    By Protectolite Inc. based in Toronto, ONTARIO (CANADA). from Waste Water & Water Treatment Product line

  • Overflow Weir

    Size: 1000 x 150 mm up to 3500 x 1000 mm, sealing to 3 sides. For mounting with chemical anchor bolts and concrete.The function of overfall weirs is to adjust great water volumes to a constant level with a small adjusting range. Overfall weirs 3-lateral sealed, the weir is bedded on the bottom of the channel and two side shields which will be ...

    By BÜSCH Technology GmbH based in Nürnberg, GERMANY. from Weirs Product line

  • Rotary Weir

    Size: 1000 x 150 mm up to 3500 x 1000 mm, sealing to 4 sides.For mounting with chemical anchor bolts and concrete

    By BÜSCH Technology GmbH based in Nürnberg, GERMANY. from Weirs Product line

  • Tilting - Model KKS-HDPE - Weir

    KWT weirs are available in various forms and are mainly used in surface and process water systems. The KKS-PE tilting weir provides a very accurate means of controlling water levels upstream, and is a very cost-effective solution for smaller applications. Using a plastic tilting weir is often a cost-effective solution. The side pieces of the weir ...

    By KWT Group/ KWT International based in Biddinghuizen, NETHERLANDS. from Tilting Weir Product line

  • Weirs

    Weirs are the workhorse of any treatment plant.  By definition, they control the overflow rate of water through the hydraulic profile.  JC-Fabrications can provide weirs to meet almost any specification, from V-notch weirs to sharp-crested and flat top weirs, in standard 12' lengths or custom lengths up to 20'.  Our weirs are ...

    By JC-Fabrications, LLC based in Boca Raton, FLORIDA (USA).

  • Golden Harvest - Model GH 60 & GH-66 - Aluminum & Stainless Steel Weir Gates

    Golden Harvest Inc. Weir Gates are designed to control upstream water elevation and can provide a rough estimate of flow using notched gates via the downward- opening design. Weir gates function like slide gates, except that the disc opens downward allowing outflow to weir over the top of the gate.

    By Golden Harvest, Inc. based in Burlington, WASHINGTON (USA). from Weir Gates Product line

  • WACO - Weir Gates

    For control of flow through a port opening and to balance flow through parallel systems, the WACO weir gate is the answer. The weir gate opens by lowering its slide plate, allowing water to cascade over the top edge. By adjusting the height of the slide plate, the water level upstream can be controlled. WACO weir gates feature handwheel or ...

    By WACO Products, Inc. based in Baltimore, MARYLAND (USA). from Environmental Products Product line

  • Model KD 34 - Adjustable Overflow Weir

    The adjustable overflow weir model KD 34 is designed for controlling the inlet volume in inlet structures and distributor structures. It may also be used in outlet structures and in sand traps to control the water level and in grease traps to remove grease from the surface of the water. The adjustable overflow weir is placed between two side ...

    By Danish Wastewater Equipment A/S based in Vejle, DENMARK. from Regulation Product line

  • Segmental Weir Machine

    Segmental weirs are used anywhere where more precise regulation of the water volume is required due to high back pressure. Due to the stress capacity principle, they can be operated with low torque and thus lower drive power. To be more economically, the frame-bar construction of the segmental weirs are fitted with a projecting baffle plate, with ...

    By HST Systemtechnik based in Meschede, GERMANY. from Steelwork Product line

  • Premium

    ESSD Washtroughs and Collectors

    ESSD washtroughs and collectors provide a high quality, low cost, engineered product that is economical and versatile. ESSD washtroughs can be provided with v-notch weir plates or orifices when used for clarifiers, and with MULTIWASH baffles when used for gravity filters.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Filtration Product line

  • Premium

    ANDRITZ - Model D-Type - Large Decanter Power Savings

    New design features for Andritz Separation D-type decanters enable significant - up to 40% - reduction of total power consumption while maintaining throughput and efficiency. With power costs rising, this level of power savings translates into a very fast return on investment. The power-saving features are available on new D5 to D10 decanters. The ...

    By ANDRITZ Separation - a division of the Andritz Group based in Graz, AUSTRIA. from Process Lines Product line

  • WWE - Conventional and Inclined Plate Clarifiers

    Metal finishers requiring high-efficiency solids removal from metal hydroxide wastes are turning away from the traditional large circular or rectangular clarifiers to Water & Wastewater Equipment Company’s line of Inclined Plate Clarifiers for these reasons: Up to 50% lower installed cost. Up to 90% less floor space requirements. ...

    By Water & Wastewater Equipment Company based in Cleveland, OHIO (USA).

  • PCS - Parallel Plate Clarifiers for Wastewater Treatment

    Parallel plate technology is the key to enhanced solids removal in the liquid/solid gravity separation systems. These wastewater clarifiers are manufactured in various materials of construction, depending upon the requirements of a specific application.

    By Pollution Control Systems, Inc. (PCS) based in Milford, OHIO (USA). from Wastewater Clarifiers Product line

  • Link-Belt - Model HFR - High Flow Rate Grit Washer

    The HFRs tremendous performance is accomplished effectively by immediately redirecting the inlet stream to create predictable flow patterns which promote rapid separation and settling of solids. The heavy inorganic grit is forced to settle and in turn be conveyed by the screw discharge while lighter organics are carried over the front discharge ...

    By WSG & Solutions, Inc. based in Montgomeryville, PENNSYLVANIA (USA). from Grit Removal Product line

  • PEWE - Model OZ - Oil/Water Separator (25 to 2000 GPM)

    The PEWE premier line of OZ Oil/Water Separator systems cover the full range of flow and removal possibilities. The unique technology built into each PEWE OZ Oil/Water Separator system maximizes free Oil and Grease (OG) removal without the need for chemistry. With the Tru Counter-Cross Flo plate pack and the ParaLam Weir system with integrated ...

    By Process Engineered Water Equipment, LLC. based in Vancouver, WASHINGTON (USA). from Product Groups Product line

  • Kusters - Standard Scraper Clarifiers (HBPS)

    Pier supported scraper clarifiers are designed for all applications involving sludge removal. Flow enters through the center pier then discharges through outlet ports located at the top of the center column into either a controlled energy inlet or feedwell. The energy inlet / feedwell dissipates the influent energy, minimizes density currents and ...

    By Kusters Zima Corporation based in Spartanburg, SOUTH CAROLINA (USA). from Clarification Product line

  • Phoenix - Backwash Troughs

    AWI Phoenix Backwash Troughs are designed, built and installed for municipal and industrial water treatment facilities.  Fabricated from Stainless Steel or molded from fiberglass reinforced plastic, the Phoenix Backwash Trough has a design that can be adapted and installed into all filter configurations.  Each trough is equipped with ...

    By AWI based in Sandy, UTAH (USA). from Phoenix Products Product line

  • Model 2110 - Ultrasonic Flow Module

    The 2110 Ultrasonic Module provides accurate non-contact liquid level measurement, using built-in software to calculate flow in weirs, flumes and streams. When used in conjunction with Isco’s Flowlink® 4 data handling software, that information can be managed and used in a wide variety of ways. With the 2110, an ultrasonic sensor mounted ...

    By Teledyne Isco based in Lincoln, NEBRASKA (USA). from Open Channel Flow Measurement Product line

  • Clarifiers

    The Schreiber Clarifiers are versatile and very durable peripheral drive clarifiers. The peripheral drive system utilizes leverage rather than center-drive torque to rotate the scraper and skimming assembly, resulting in a simplified mechanical system. The equipment necessary for the continuous removal of floatables and settled solids is suspended ...

    By Schreiber LLC based in Trussville, ALABAMA (USA). from Aeration and Clarification Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you